Promotions
The R&S RTM3000 provides users with more than just an oscilloscope. It includes a logic analyzer, protocol analyzer, waveform and pattern generator, digital voltmeter.
Dedicated operating modes for frequency analysis, mask tests and long data acquisitions are integrated. You can quickly and efficiently debug all kinds of electronic systems.
10-bit vertical resolution
The R&S RTM3000 features a customized Rohde & Schwarz designed 10-bit A/D converter that delivers a 4x improvement over conventional 8-bit A/D converters.
The increased resolution results in sharper waveforms with more signal details that would otherwise be missed.
One example is the characterization of switched-mode power supplies. The voltages across the switching device must be determined during the on/off times within the same acquisition. For precise measurements of small voltage components, a high resolution of more than 8 bit is essential.
500 µV/div: full measurement bandwidth and low noise
The R&S RTM3000 oscilloscope offers outstanding sensitivity down to 500 µV/div. Traditional oscilloscopes can only reach this level of input sensitivity by employing software-based magnification or by limiting the bandwidth.
The R&S RTM3000 oscilloscope shows the signal’s real sampling points over the full measurement bandwidth – even at 500 µV/div. This ensures high measurement
accuracy.
The accuracy of the signal displayed on the screen depends on the oscilloscope’s inherent noise. The R&S RTM3000 oscilloscope precisely measures even at the smallest vertical resolution by using low-noise frontends and state-of-the-art A/D converters.
R&S RTM3000 Oscilloscope Specification
| Number of oscilloscope channels | 2 / 4 |
| Bandwidth in MHz | 100, 200, 350, 500, 1000 |
| Max. sampling rate in Gsample/s | 2.5/channel, 5 interleaved |
| Max. memory depth in Msample | 40/channel, 80 interleaved; |
| 400 Msample (optional) | |
| segmented memory | |
| Timebase accuracy in ppm | 2.5 |
| Vertical bits (ADC) | 10 |
| Min. input sensitivity | 500 µV/div |
| Display | 10″ capacitive touch, |
| 1280 × 800 pixel | |
| Update rate | 2 000 000 waveforms/s in fast segmentated memory mode |
| MSO | 16 channels, 5 Gsample/s |
| Protocol (optional) | I2C, SPI, UART/RS-232/RS-422/ RS-485, CAN, LIN, audio (I²S/ LJ/RJ/TDM), ARINC, MIL |
| Generator(s) | 1 ARB, 4-bit pattern generator |
| Math | +, –, *, /, FFT (128k points), 21 advanced functions |
| Rohde & Schwarz probe interface | standard |
| RF capability | spectrum analysis |
