The R&S ZNLE makes vector network analyzer measurements as easy as ABC: easy to configure, easy to
calibrate, easy to measure. The renowned high-quality design, an innovative user interface and its compact
size make the R&S ZNLE ideal for basic VNA applications.
The R&S ZNLE is a two-port vector network analyzer that can be used for bidirectional measurements of S-parameters S11, S21, S12 and S22 on passive components.
Configuring the R&S ZNLE requires only three decisions:
1. Choose the frequency range
2. Decide whether you need a GPIB interface
3. Decide whether you need to perform time domain analysis or distance-to-fault measurements
The analyzer is available with a frequency range of 100 kHz to 3 GHz (R&S ZNLE3 with R&S ZNLE-B100
option), 100 kHz to 4.5 GHz (R&S ZNLE4 with R&S ZNLE-B100 option) or 100 kHz to 6 GHz (R&S ZNLE6
with R&S ZNLE-B100 option). The optional GPIB interface lets you connect a controller to remotely control the
R&S ZNLE.
As a standalone instrument, the R&S ZNLE does not require an external PC to configure the setup. You can start measuring immediately after you switch on the instrument. The time domain analysis option (R&S ZNL-K2) and distance-to-fault measurements option (R&S ZNL-K3) enhance the R&S ZNLE with essential features for general purpose testing.
Key features
â–º Frequency range from 100 kHz to 3 GHz, 100 kHz to 4.5 GHz or 100 kHz to 6 GHz
â–º Two-port vector network analyzer with a full S-parameter test set for bidirectional measurements on passive components
â–º Wide dynamic range of up to typ. 120 dB
â–º Measurement bandwidths from 1 Hz to 500 kHz
â–º Fast measurements, i.e. 8.7 ms for 401 points (100 kHz IFBW, 200 MHz span, correction off)
â–º Compact size (depth of 24 cm) and low weight (6 kg)
â–º Standalone instrument with 10.1″ WXGA touchscreen
â–º Windows 10 operating system