Promotions
The R&S HM6050 Two Line Impedance Stabilization Network (LISN)is used as a reproduction of supply networks in order to be able to carry out the line-bound interference emissions as part of measurements and tests for electromagnetic compatibility (EMC).
The HM6050 suppresses high-frequency interference from the supply network, establishes a standardized impedance for the device under test, and decouples the high-frequency radio interference voltages from the device under test in order to be able to supply it to a spectrum analyzer or EMI receiver.
The R&S HM6050 is a single-phase V-network simulation for the frequency range from 9 kHz to 30 MHz (according to CISPR 16) and is suitable for maximum currents up to 16A
The unit complies with VDE 0876 and CISPR Publ. 16 (band A and B) regulations and can be operated manually or PC controlled via the built in RS232 interface. It is designed and built using air core inductors to avoid saturation at peak current loads.
- Measurement of Line-conducted Interferences within the Range from 9 kHz…30 MHz (CISPR 16)
- Selectable Transient Limiter
- Artificial Hand Connector
Highlights & Details
- Measurement of line-conducted interference within the rangefrom 9kHz to 30MHz
- Switchable transient limiter
- Artificial hand connector
Facts
- Transient Limiter
- Measurement output: 50 Ω BNC
- Test Connection via earthing contact socket
- Hand to the education about 4 mm socket
- Protection class I (IEC 1010-01/VDE 0411)
- RS-232 interface
Technical data
- Frequency range: 9 kHz to 30 MHz
- The picture resistance: Z=50 Ω II (50 μH + 5 Ω)
- Max. operating current: 16 A
- Hand to the formation: 220 pF + 511 Ω
- Protective conductor according to education: 50 Ω II 50 μH
- Transient Limiter Frequency range: 150 kHz to 30 MHz
- Transient Limiter Transmission loss: 10 dB (+1.5/- 0.5 dB)
