PRESYS T-500PIR Infrared Calibrator

NEW!!

Using your cell phone or Android device with our Andromeda application, connected to the T-500PIR through Bluetooth, you can easily set-up the right compensated temperature of the T-500PIR black body following the Sakuma-Hattori equation. If you need to calibrate an IR thermometer with a different emissivity, it will automatically set-up the right temperature of the black body source.

Generates temperatures from ambient to 500 °C.
Large target of 80 millimeters.
Ideal for the test and calibration of most infrared thermometers available in the industry.
High Accuracy: 0.4 °C + 0.1 % of reading – with internal sensor and 0.1 °C with external sensor.
Excellent temperature uniformity on the whole target surface.
Emissivity of 0.95 ± 0.01 °C for a wave-length from 8 µm to 14 µm.
Quickly reach the selected temperatures.
Temperature stability: 0.2 °C.
Configurable readings in °C or °F.
Sakuma-Hattori Emissivity compensation.
Bluetooth Interface.

Presys T500PIR Datasheet

Presys T-150PIR User Manual

Categories: Infrared Temperature Calibrators, Presys Instruments Tags: Calibrators, PRESYS

Description

The PRESYS T-500PIR Infrared Calibrator generates temperature values in order to enable the calibration of infrared thermometers. The temperatures generated have high accuracy, in an area of uniform temperature and emissivity.

The PRESYS T-500PIR Infrared Calibrator also has input for thermocouples and resistance thermometers, as well as current meter function.

The T-500PIR generates temperature from ambient to 500 ºC.
Has input for thermocouples, RTDs and thermoswitches reading.
The use of external standard thermometer is not required*.
Carries out completely automatic calibrations with or without the use of a
Accuracy of up 0.4 ºC, stability of 0.2 °C and resolution of 0.01 ºC.
Documenting capabilities: communication with computer and ISOPLAN Calibration Software.
Portable and compact, has strap for easy

* For high performance calibration, it is possible to make use of an external sensor RTD read in the input of the calibrator, with adjustment of the Callendar-Van Dusen coefficients.

It has extensive programming capabilities, where the calibrator is programmed to generate pre-set temperature.

Compatible with automatic calibration and documenting software, with application of ISOPLAN software on PC / Windows platform, using the serial port for connection between the PC and the calibrator that communicate via RS-232 or RS-485. ISOPLAN software can register thermometers and factory instruments, generate work orders, produce and print calibration certificates and reports, that is, all the information of power is brought into the environment of calibrations.

T-500PIR has also many other features, such as:

The electric signal calibrator is independent from the blackbody target
Internal buzzer beeps when the temperature reaches the desired
Keypad that eases the operation and configuration of the
Vacuum Fluorescent Display to present big-size
Thermo-element reading scaled to ITS-90 or IPTS-68.
RTD reading configurable with Callendar-Van Dusen coefficients
Internal regulated 24Vdc power supply for 2-wire
Internal rechargeable battery and battery charger included in the electric signal calibrator.
Independent circuitry for over-temperature protection and