AC Transducer Clamp Meter 1-100-1000A~ | HT Instruments HT96U

HT Instruments HT96U  AC Transducer Clamp Meter can measure AC current with 1-100-1000A range. It has ± 1.0% basic accuracy with a safety CAT III 600V rating

Key Features:

• Measuring range: 1mA÷1000A
• Basic accuracy: ± 1.0%reading
• Overvoltage category: CAT III 600V
• Clamp jaw internal diameter: 54mm
• Output connector: Hypertac

Primary rates current: 1A, 100A, 1000A FS

Measuring range: 0.001÷1.2A, 0.1÷120A, 1A ÷ 1200A

Output signal: 1V

Protection: By diodes

Ratio: 1mV/mA – 10mV/A – 1mV/A

Accuracy: 1% and 0,5%

Max error: 2% (of reading)

Internal load: 1A=3kΩ; 100A=15Ω; 1000A=1.5Ω

External min load: 100 times the internal load

Frequency range: 40Hz ÷ 100Hz

Pollution degree: 2 according to IEC 1010-1

Dielectric strength: 5,5KV 50Hz 1min

Temperature range: -10° ÷ +50°C

Overvoltage category: CAT III 600V

“Opening” cable: Diameter 54mm

“Opening” bus bars: 35x35mm or 50x12mm

Dimensions (mm): 105 x 225 x 31mm

Weight: 720g

Power measurement: Take care to keep the conventional direction P1 ⇒ S1 rear of the arrows

Output connection: Shielded cable FM2R 2m long , ended with a FRB D01 connector