Electric Vehicle Charging Station Tester | HT INSTRUMENTS MacroEVTest

The MacroEVtest, in combination with the EV-Test100 EV adapter, connects to the charging station to allow the verification of public and private electric vehicle (EV) recharging stations and verification of domestic and industrial electric systems.

The MACROEVTEST verifies and checks recharging stations for electric cars (EVSE) in compliance with standards IEC/EN 61851-1 and IEC/EN60364-7-722, and for safety tests in private and industrial environments.

PDF Download icon HTI MACROEVTEST Brochure HTI MACROEVTEST Datasheet

HT MACROEVTEST User Manual

Categories: EV Charger Testers, HT Italia, IEC Safety Tester, Test Equipment For Transport Tag: Electric Vehicle Charger

Description
Specifications

The HT Instruments MACROEVTEST enables the verification and control of electric vehicle charging stations (EVSE) in accordance with the IEC / EN 61851-1 and IEC / EN60364-7-722 standards, and for safety tests in environments civil and industrial CEI 64.8.

CHECKS ON RECHARGING STATIONS FOR ELECTRIC CARS MACROEVTEST + EV-TEST100

Connection is simple. The MacroEVtest is connected through the provided C100EV cable to EV-Test100, which is connected, through an in-built cable provided with type2 plug, to a recharging station.

SIMPLIFIES

EV-Test100 can simulate the presence of a car being recharged and, at the same time, communicates with MacroEVtest thanks to the new display with touch screen system fitted to HT’s latest generation instruments.

SIMULATES

To correctly perform all tests, all you need to do is following the GUIDED PROCEDURE created by HT for this innovative instrument.

GUIDES YOU

Before each test, MacroEVtest indicates how the cables must be connected and at the end of the measurement provides evaluations of the test results and indicates the recharging station’s safety status by a green or red thumb symbol.

Specifications

MACROEVTEST Functions

Sequence of tests for the verification of electric columns	with EV-TEST100 adapter
TRMS
Insulation with test voltages 100, 250, 500, 1000VDC
Continuity of protective conductors with 200mA
Tripping time and current of RCDs type B, A, AC Standard, Selective and Delayed up to 1A
Tripping time and current of RCDs with separate clamp jaws type B, A, AC Standard, Selective and Delayed up to 10A	With optional accessory RCDX10
Non-trip earth resistance
Earth resistance by voltammetric method
Resistance of the single earth rods with clamp	With optional accessory T2100
Ground resistivity by 4-wire method
Loop/Line impedance, Phase-Phase, Phase-Neutral, Phase-PE	With optional accessory IMP57
Measurement of percentage voltage drop on the line
AUTO test (Non-trip ground resistance, RCD, Insulation) in sequence
Contact voltage
Phase sequence
Leakage current with optional clamp meter
Measurement of Voltage, Current, Active, Reactive, Apparent Power	(1)
Measurement of Cosphi, Power Factor	(1)
Voltage and current harmonics up to the 25th and THD%	25ª
Protection category	CAT IV 300V
Measurement of environmental parameters (°C,°F, %RH, Lux)
Test with remote lead	PR400
Help on line on the display
Internal memory for measured data saving
Optical/USB serial port for PC connection
Integrated WiFi connection and compatibility with HTANALYSIS App
Size (LxWx H) (mm)	225 x 165 x 75mm
Weight in grams (batteries included)	1.2kg