Promotions
The HT Italia HT4013 complies with IEC/EN61010-1 under CAT III 600V and is suitable for measurements on both domestic and industrial sites.
The HT HT 4013 Clamp Meter has been designed to measure AC/ DC current up to 400A and AC/DC voltage up to 600V to reach CAT III 600V in compliance with standard IEC/ EN61010-1.
The HT 4013 is provided with an internal sensor to detect AC voltage also without contact, through a red LED turning on. This model also carries out measurements of Resistance, Continuity tests, Frequency, Capacity, Diode test, Duty Cycle and Temperature with K-type probe, among others. The clamp is also provided with the auto power off function to preserve its own battery.
HT Italia HT4013 Function:
- AC/DC current up to 400A
- DC/AC voltage up to 600V
- “Voltsense” feature for AC voltage detection
- Resistance
- Continuity test with buzzer
- Frequency with test leads
- Capacitance
- Diode test
- Duty Cycle
- Temperature with type K probe
- Autorange
- Data HOLD
- Relative measurement
- Auto Power OFF
HT Italia HT4013 AC/DC Clampmeter Specifications:
| Current measuring range | 400A |
| AC/DC voltage | 600V |
| Supply | |
| Battery type | 2×1.5V batteries type AAA LR03 |
| Low battery indicator available | Yes |
| Auto Power OFF | after 30 minutes of idleness (not disabled) |
| Display | |
| Characteristics | 4 LCD (max 4000 counts), decimal point, unit symbol indication |
| Sample rate | 2 times/sec |
| Conversion mode | mean value |
| Climatic conditions | |
| Reference temperature | 18°C ÷ 28°C |
| Operating temperature | 5 ÷ 40 °C |
| Operating humidity | <80%RH |
| Storage temperature | -20 ÷ 60 °C |
| Storage humidity | <80%RH |
| Mechanical characteristics | |
| Size (L x W x H) | 200 x 66 x 37mm |
| Weight (including battery) | 205g |
| Max conductor size | 30mm |
| Reference guidelines | |
| Safety | IEC/EN61010-1, CE MARK |
| EMC | IEC/EN61326-1 |
| Insulation | double insulation |
| Pollution level | 2 |
| For inside use, max height | 2000m |
| Measurement category | CAT III 600V to ground |
HT Italia HT4013 Standard Accessories:
- Couple of test leads
- TK101 : Type K bead probe
- Carrying bag
- Batteries
- User manual
Reviews
There are no reviews yet.