Yokogawa 30031A AC Leakage Current Clamp

 

Buy now form My Meter

The Yokogawa 30031A AC leakage clamp-on tester can measure leakage currents of 1 mA. This can be useful for checking the insulation of low-voltage circuits and electrical components.

The Yokogawa 30031A leakage clamp-on tester can also measure a broad range of currents from leakage currents (at a resolution of 0.001 mA) to load currents up to 60 A. Typical influence (on the current value of an adjacent cable) from an external magnetic field is 0.0005%. Designed to withstand more than 50,000 opening/closing events, the Yokogawa 30031A leakage clamp-on tester is very durable.

SKU: Yokogawa 30031A Categories: , Tags: ,

Feature of YOKOGAWA 30031A AC Leakage Clamp-On Tester.

•3200 count LCD display
•Mean value display
•Exclusive model for Leakage current measurement with current ranges from 3mA to 60A
•Resolution of 0.001mA at 3mA range
•Can measure a broad range of currents from leakage currents (at a resolution of 0.001 mA) to load currents up to 60 A.
•Can measure leakage currents of 1 mA
•Approved for conformity to safety standards EN 61010-1 and EN 61010-2-032 (CAT III 300V, pollution degree2)

Parameter Reference
AC Current 3/30mA, 30/60A
Frequency Characteristics 50/60Hz
Accuracy 50/60Hz 1.0+5 (0~30mA) 1.0+5 (0 ~ 50A) 5.0+5 (50/60Hz)

Yokogawa 30031A General Specifications

Parameter Specification
Method of Detection Mean Value
Diameter of Measurable conductor Ø40MM at maximum
Display LCD Digital Display: 3200 Counts
Bar-graph Display: 32 Segments
Measurement Cycle Digital Display: 2 times/Seconds
Bar-Graph Display: 12 times/second
Range Switching Auto-Range
Data Hold On All range
Ambient Temperature and Humidity 0-50˚C, 85% RH or less (no condensation)
Temperature coefficient 0.05% of range/°C or less (within the ranges of 0-18°C and 25-50°C for measurement of 0-50A)
Influence of external Magnetic Field 0.0005% typical*1 (on current value of adjacent cable)
Influence of Conductor Position Within Accuracy
Circuit Voltage 300Vrms or less
Withstanding Voltage 3.7kV AC for one minute
Power Supply CR2032 (coin-shaped) 3V x1
Battery Life Approx. 90 hours (continuous use)
Auto Power-off Approx. 10 Minutes
Dimensions Approx. 70(W)x176(H)x25(D)mm
Weight Approx. 200g

Yokogawa 30031A Specifications (AC current measurement)
Range Resolution Accuracy Maximum Allowable Current
3mA 0.001mA 0.010<1<32.70mA: 1.0% + 5 digits 3.270mA
30mA 0.01mA 0.010<1<32.70mA: 1.0% + 5 digits 32.70mA
30A 0.01A 0.05<1<50.0A: 1.0% + 5 digits 32.70A
60A 0.1A 50.0<1<60.6A: 5.0% + 5 digits 60.6A
Specifications (AC current measurements for Model 30032A)
Range Resolution Accuracy Maximum Allowable Current
3mA 0.001mA 0.010<1<32.70mA: 1.5% + 5 digits 3.270mA
30mA 0.01mA 0.010<1<32.70mA: 1.5% + 5 digits 32.70mA
30A 0.01A 0.05<1<50.0A: 1.5% + 5 digits 32.70A
60A 0.1A 50.0<1<60.6A: 5.5% + 5 digits 60.6A
  • Zero Correction:
    3mA Range: displays 0.000mA (zero) when 0.010mA <1
    30A  Range: displays 0.00A (zero) when 0.05A<1
  • Filter specification (for Model 30032A only)
    Amplitude ratio at 100Hz: -38dB (1.26%) or less (typical: -41dB)
    Amplitude ratio at 120Hz: -53dB (0.22%) or less (typical: -56dB)
Yokogawa 30031A General Specifications

Parameter

 Specification
Method of detection Mean Value Detection and RMS-Value Calibration
Display LCD (Digital display:3200 counts)
LCD (Bar-graph display: 32 segments)
Range Switching Auto or manual range selection
Data Hold On all ranges
Ambient Temperature and Humidity 0 to 50°C
80% RH or less (no condensation)
Temperature Coefficient The following values must be added in the temperature range of either 30031A or 310032A
0 to 18°C or 28 to 50°
0<1<50.0A: ±(0.08% of reading/°C + 0.5 digits/°C)
50.0<1<60.6A: ±(0.3% of reading/°C + 0.5 digits/°C)
Influence of External Magnetic Field 0.0005% typical 1 (on current value of adjacent cable or wires)
Safety Standard EN61010-1, EN61010-2-032 (CAT III 300V)
Circuit Voltage 300Vrms or less
Withstanding Voltage 3.7kV AC for one minute
Power Supply One CR2032 (Coin-shaped) 3V battery
Battery Life Approx. 90 hours (continuous)
Auto Power Off Approx. 10 minutes after the last switch operation
Diameter of Measurable Conductor 40mm maximum
Dimensions Approx. 70mm (W) x 179mm (H) x 25mm (D)
Weight Approx. 200g
Accessories User manual, Battery and soft Carrying Case
Ordering Information
Yokogawa 30031A Clamp-On Tester for AC Leakage Current Measurement. Includes: User’s manual, batteries, and carrying case.
Yokogawa 30032A Clamp-On Tester for AC Leakage Current Measurement. Includes: User’s manual, batteries, and carrying case.

Reviews

There are no reviews yet.

Be the first to review “Yokogawa 30031A AC Leakage Current Clamp”

Related Products

announcement  EOFY specials It's that time of the year again - the end of financial year! And here at Rapid-Tech, we've got some amazing EOFY specials for all our customers.

EOFY specials!