Tenmars TM-185 LED Temperature, Humidity Monitor

The Tenmars TM-185 temperature / humidity monitor can be wall mounted and features an easy to read LED. It is perfect for temperature and humidity monitoring in controlled environments and other critical areas.

Features:

Complete environmental monitor and alarm.
Wall mounted easy reading large LED display for simultaneous reading of Humidity and Temperature.
Dual LED display: maximum reading Primary Display is 1999, maximum reading of bottom Secondary Display is 999.
Time clock.
Alarm set for Hi and Low limit. Temperature and Humidity.
LED Display, displays real-time data.

Applications

Warehouses, Laboratories, Electronics Manufacturing, Refrigerators/Freezers, Hospitals Blood Supplies, Tissue Banks, Computer Rooms, Clean Rooms, Defence Environments, and other critical areas.

Authorised Australian Distributor

TM185D TM185 User Manual

SKU: TENMARS TM185 Categories: Temperature/Humidity, Tenmars Tags: Humidity, Tenmars

Tenmars TM-185 LED Temperature, Humidity Monitor Applications:

Warehouses, Laboratories, Electronics Manufacturing, Refrigerators/Freezers, Hospitals Blood Supplies, Tissue Banks, Computer Rooms, Clean Rooms, Defence Environments, and other critical areas.

Tenmars TM-185 LED Temperature, Humidity Monitor Specifications:
LCD Character Dimensions	214mm x 120mm (8.4″ x 4.73″)
Temperature Ranges	-20°C to 60°C (-4°F to 140°F)
Temperature Accuracy	±1.0°C (-5°C to 40°C), ±1.8°F (23°F to 104°F), other ±2.0°C/3.6°F
Temperature Resolution	0.1°C and 0.1°F
Temperature Updating Rate	One time per second
Temperature Sensor Type	Diode
Relative Humidity Range	5% to 95%
Relative Humidity Accuracy	±2.0% RH (at 25°C, 35% to 80% RH) ±2.5% RH (at at 25°C, 10% to 35%, 80% to 90% RH) other ±5% RH (at 25°C, <10% RH, >90% RH)
Relative Humidity Resolution	1.0%
Relative Humidity Response Time	less than 4 seconds
Dew Point Range	-30°C to 100°C (-22°F to 212°F)
Wet Bulb Range	0°C to 80°C (32°F to 176°F)
Relative Humidity Response Time	Below 4 seconds

General Specifications
Power Supply	AC/DC 50/60Hz adapter (9V/1A)
Battery Backup	9 Volt battery enables continued measurement during power disruption
Dimensions	260mm (L) x 178mm (W) x 47mm (D)
Weight	1000g

Ordering Information

Model Name	Description
Tenmars TM-185	Temperature and Humidity Monitor Included accessories: User’s manual, 9-volt battery,
Tenmars TM-185D	Temperature and Humidity Monitor Datalogger Included accessories: User’s manual, 9-volt battery, and AC/DC adapter

Maintenance

Do not use the meter in an environment with severe change; do not store the unit in an environment with high temperature, high humidity, and high vibration
Take battery out if the meter is not being used for a long period
The Diode temperature probe is used to measure temperature and the capacitive humidity sensor is used to measure take humidity
The thermocouple and humidity sensor will start aging under the influence of oxidation, reduction, corrosion, pollution, vaporization, diffusion or other metallurgy. The aging process will affect its accuracy
Cleaning and inspection of temperature probe: The smoke, coal, dust, grease attached on the protective tube of temperature probe will slow down the heat conduction of the thermocouple and cause measuring error. Therefore, it should be cleaned periodically. The metal coating of thin thermocouple should be replaced upon the occurrence of corrosion.
Cleaning and inspection of humidity sensor: The smoke and dust attached on the humidity sensor will slow down the function of humidity sensor and cause measuring error. Therefore, it should be cleaned periodically. Blow off the dust with mild compressed air instead of water or alcohol. The aluminum plate inside the humidity sensor should be replaced upon the occurrence of corrosion.