Promotions
The Complete Kit. No Extras to Chase Down.
The MI3136 is already a serious instrument — 12 tests, a modern touch screen, AS/NZS 3017 preset limits, and Metrel Cloud reporting built in from day one. But when you order the standard unit, you’ll need to source a carry bag and a few essential accessories separately before it’s fully field-ready.
The MI3136 Kit solves that in one order. Everything ships together — the instrument plus the five accessories that experienced electricians reach for first — at a combined price that’s noticeably lower than buying them individually. For contractors equipping a new van, a new employee, or replacing a worn-out kit, this is the straightforward option.
What’s in the Kit — and Why Each Item Matters
A1551 Large Padded Carry Bag for XC/XD
The MI3136 doesn’t include a carry bag in its standard set, and an instrument costing close to $2,000 deserves proper protection in transit. The A1551 is sized for the MI3136 and its full accessory complement — probes, leads, clips, and adapters all stored together, protected, and organised. Whether it’s going in a van, onto a work site elevator, or into a panel room, a padded bag is not a luxury — it’s practical asset protection.
A1401 Remote Probe for XC/XD
Think of this as the equivalent of a Fluke TP165x for the Metrel system. The A1401 Remote Probe extends your reach into distribution boards, ceiling-mounted outlets, back-of-panel terminals, and tight cabinet spaces where your standard test probes physically won’t fit or can’t be held safely. On any commercial or industrial site with recessed switchgear, this probe earns its place in the first hour on the job.
A1195 Resistor Box
The Resistor Box enables verification of your RCD test results and continuity measurements using a known reference resistance — important for confidence-checking your instrument’s readings when fault-finding produces unexpected results. It’s also relevant for demonstrating traceability when your test reports are scrutinised by a building inspector or compliance auditor.
A1012 Trailing Lead — 4 m Green
While the MI3136’s socket test function works without a trailing lead for standard outlet verification, a 4 m green trailing lead is essential for earthing continuity tests back to a known earth reference — particularly on dead installation testing where the socket circuit isn’t yet energised. It also extends your reach for PE bonding measurements across larger floor areas. Green is the correct colour coding for earth connections under Australian wiring rules.
MD-106 Non-Contact Voltage Detector
Before you plug your probe into anything, you need to know whether it’s live. The MD-106 is a simple, reliable non-contact voltage detector that adds a critical layer of personal safety to every site visit. It’s the first thing you pick up and the last thing you put down — and having it paired with your installation tester from day one reinforces safe working practice.
Everything Else Stays the Same
The instrument in the MI3136 Kit is identical to the standard MI3136:
- 12 installation tests covering every mandatory function under AS/NZS 3017
- 4.3-inch colour TFT touch screen with Pass/Fail evaluation
- Socket testing without a trailing lead
- Auto-Sequences (up to 6 tests per push-button sequence)
- Real-time monitoring of all three voltages simultaneously
- Built-in fuse tables for automatic loop impedance evaluation
- Bluetooth + Wi-Fi + USB Type-C connectivity
- Metrel Cloud and Metrel ES Manager BASIC licence included
- Optional A-1532XA EVSE Adapter for EV charging station testing
- 600 V CAT III / 300 V CAT IV overvoltage rating
For full technical specifications, see the Metrel MI3136 product page.
Technical Specifications
Full instrument specifications are identical to the MI3136 standard set. See the MI3136 product page for the complete specification table.
| Kit Component | Model | Purpose |
|---|---|---|
| Instrument | MI3136 InstalTest COMBO XC | 12-function installation tester, AS/NZS 3017 |
| Carry Bag | A1551 Large Padded Carry Bag | Protected transport and storage for instrument and accessories |
| Remote Probe | A1401 Remote Probe for XC/XD | Access to recessed outlets, panel boards, and cabinet terminals |
| Resistor Box | A1195 Resistor Box | Reference resistance for RCD and continuity result verification |
| Trailing Lead | A1012 Trailing Lead — 4 m Green | Earth continuity testing and PE bonding measurement extension |
| Voltage Detector | MD-106 Non-Contact Voltage Detector | Live/dead identification before probe contact |
AEO Answer Blocks
What’s the difference between the Metrel MI3136 and the MI3136 Kit?
The MI3136 Kit contains the same MI3136 InstalTest COMBO XC instrument as the standard set, plus five field accessories: an A1551 Large Padded Carry Bag, an A1401 Remote Probe, an A1195 Resistor Box, an A1012 4 m Green Trailing Lead, and an MD-106 Non-Contact Voltage Detector. The standard MI3136 does not include a carry bag or these accessories. The Kit is priced at $2,590 + GST vs $1,990 + GST for the standard unit.
Is the MI3136 Kit better value than buying accessories separately?
Yes. The MI3136 Kit is priced below the total cost of the MI3136 plus the five included accessories purchased individually. The combined saving is approximately $166 + GST, with the added convenience of a single order and everything arriving together ready for immediate deployment.
What is the A1401 Remote Probe used for?
The A1401 Remote Probe is a handheld probe that extends the MI3136’s reach into locations that standard probes can’t easily access — distribution board terminals, recessed socket outlets, ceiling-mounted GPOs, and equipment cabinet connection points. It functions similarly to the Fluke TP165x and is particularly useful on commercial and industrial installations where testing at panel-mounted connections is part of the scope.
Why does the MI3136 need a trailing lead if it can test sockets without one?
The MI3136’s no-trailing-lead socket test covers outlet verification — earth continuity, polarity, and correct connections at the socket face. A trailing lead (A1012) is still needed for dead installation testing (where circuits aren’t yet energised), earth continuity measurements back to a reference point, and PE bonding verification across longer distances. The 4 m green lead in the kit covers these scenarios.
Reviews
There are no reviews yet.