MAGNUM PRO MVP-600 Pneumatic Calibration Hand Pump

The MAGNUM PRO MVP-600 produces pneumatic pressure and vacuum to check calibration of gauges, switches, transmitters, and recorders. The contoured cushioned handles provide extra comfort while preventing the pump from sliding.

The over-sized check valve provides smooth operation throughout the output range while the dual o-rings on all pistons ensure zero leakage.

Patented Mash proof vent valve comes standard on all MVP-600s (No Needle Valve) and a non-oil based lubricant is used on all moving parts.

MVP-600 Data Sheet

Categories: Magnum Pro, Test Equipment For Food & Process / Industrial Tags: Pressure Pumps, Process Tools

Description

The MAGNUM PRO MVP-600 Pump offers the operator the ability to vent pressure or vacuum either slowly or rapidly. A rapid dump model (MVP-600R) is available upon request.

MAGNUM PRO MVP-600 Specifications:

Vacuum 28″Hg to pressure 600psi (combination pump)
Compatible with all gauges and calibrators
Connections (2 ports) 1/4″ and 1/8″ NPT/BSP
Weight – 2lbs
Similar to Fluke 700PTP-1 Pneumatic Test Pump
Made in the USA

MAGNUM PRO MVP-600 Features:

Contoured cushion handles
Oversized check valve for smooth controlled operation
Mash proof vent valve (No Needle Valve)
A patented non-oil based lubricant is used on all moving parts
Dual O-Rings on all pistons to ensure zero leakage
2 year warranty

Points to Remember:

Insure all gauges and instruments to be calibrated are disconnected from process pressures before connecting the
pump. Do not exceed 600 psi (41 bar) as this is the MVP6OO’s maximum pressure.
The MVP-600 has ‘l/8″ and ‘l/4″ BSP ports. In order to use NPT fittings, the required NPT to BSP parallel thread
adapters need to be Installed (Adapters are Included)
Do not use thread sealant paste or tape on the male adapters {Female adapters may be sealed with paste or tape).
Bonded washers (Included) are required to Insure a proper seal. To seal the adapters, simply hand-tighten and snug
up with a wrench. Do not over-tighten.
The MVP-600 utilizes a Schrader valve instead of a needled valve. Thus full open or closed is several turns from the end of the travel. Over-tightening does not increase the seal.

MAGNUM PRO MVP-600 Models

MVP-600: Standalone.
MVP-600KT: includes Pump, a black padded canvas case embroidered with orange thread, 2ft non-stretch hose, fittings, additional rubber bonded washers and (2) adaptors.*
MVP-600WIN: includes everything in the MVP-600KT plus Winchester Engineering Model 1 Auto Ranging Digital Gauge™ w/ N.I.S.T. certification and versatile hook.*
MVP-600WIN-FIT: includes everything in the MVP-600WIN plus FasTest universal quick connect kit and coupler for Swagelok tube fittings.*
MVP-600RK: Rebuild Kit for MVP-600 (includes: Bonded Washers, O-Rings, a Schrader Valve, a X-Ring, a Pressure Valve Spring, a Vacuum Valve Spring, a Ring Retain Clip, a Plug Shorty, Krytox High Performance Grease – GPL215, GPL226)