Promotions
MAGNUM PRO M-10 Hydraulic Calibration Hand Pump
MAGNUM PRO M-10 Specifications:
- 0 – 10,000 PSI (700 Bar)
- Compatible with most hydraulic fluids, oils and water
- Connections (2 ports) 1/4″ NPT/BSP
- Weight – 3 lbs
- Similar to the Fluke 700HTP-2
- Made in the USA
MAGNUM PRO M-10 Features:
- Contoured cushion handles
- Patented protective cage around vent knob
- Priming feature
- Patented triple filtration (prevents pump failure caused by dirt)
- A non-oil based lubricant is used on all moving parts
- Built in pressure relief valve (prevents over pressurizing)
- Shatter proof reservoir
- Oversized check valves for smooth controlled operation
- 2 year warranty
Points to Remember:
- Do not exceed maximum pressure of 10,000 psi (700 bar).
- In order to use NPT fittings, the required NPT to BSP Parallel thread adapters need to be installed (adapters included).
- Do not use thread sealant paste or tape on the male adapters {Paste or tape may be used on female adapters).
- Bonded washers (included) are required to insure a proper seal. To seal the adapters, simply hand-tighten and snug up with a wrench. Do not over-tighten.
- Use with distilled water or mineral-based hydraulic oil.
MAGNUM PRO M-10 Models
- M-10: standalone
- M-10KT: includes M-10 with hydraulic pump, 3ft high pressure hose, fittings, protective carrying case, 3 filters, test point, and fluid bottle
- M-10WIN: includes M-10 w/Winchester Engineering Model 1 Auto Ranging Digital Gauge™ (vacuum to 3K PSI)
- M-10WIN-FIT: includes everything in the M-10WIN plus FasTest universal quick connect kit and coupler for Swagelok tube fittings
