Kyoritsu 6305 Digital AC Power Analyzer

The Kyoritsu 6305 is a very easy to use power and energy logger, designed for use in both single phase and three phase electrical systems.

Featuring a large LCD display with easy to read information presented in a clear and orderly manner, the Kyoritsu 6305 can monitor voltage, current, frequency and power in real time, or using an SD card,

Kyoritsu 6305 Brochure

Kyoritsu 6305 Quick User Guide

Click here to Make an Enquiry / Demo / Calibration

If you would like more information regarding this product, simply email us here.

Categories: Kyoritsu, Power Meters Tags: KEW, KYORITSU, Power Loggers, Power Measurement/Quality

The Kyoritsu 6305 Digital AC Power Analyzer is designed for it’s easy operation. It’s front panel rotary switch is rotated from the OFF position to the “SET UP” position to allow the user to configure the Kyoritsu 6305 settings.

The second position of the rotary dial is the “WIRING CHECK” position so the user can ensure the wiring connections are correct. This checks the current sensors and voltage leads which displays a “GOOD” or “ERROR” in an easy to understand format on the LCD screen.

The third position of the rotary switch is the “W/Wh/DEMAND” position that allows the meter to perform instantaneous measurements or to be placed into record mode where a single press of the “START/STOP” button starts or stops measurement recording.

After completion of the data recording the user can switch to the final “DATA CHECK” switch position and downloads to a PC for analysis and reporting.

Kyoritsu 6305 Digital AC Power Analyzer Features:

• Comprehensive real-time monitoring, recording and analysis of single and 3-phase systems
• Voltage, Current, Power Factor and Frequency measurements
• Power analysis (Active, Apparent and Reactive power)
• Energy analysis (Active, Apparent and Reactive power)
• Active power accuracy: ±0.3%rdg±0.2%f.s.
• Automatic wiring check function to prevent incorrect connections
• Large memory capability (2GB) using built-in SD card interface
• Real time & remote measurements using Android application
• synchronous measurements between two units of KEW 6305
• Wide selection of clamp sensors allow measurements from 0.1A to 3000A
• The instrument automatically recognizes what kind of clamp sensor is connected to it
• Windows software for data analysis and setting via USB port or Bluetooth

Kyoritsu 6305 Ordering Information:

SET MODELS:

KEW 6305-01

KEW 6305 × 1
MODEL 8125 × 3 (500A)
7141B (Voltage test lead set: 4pcs) × 1
7148 (USB cable) × 1
7170 (Power cord) × 1
8326-02 (SD card [2GB]) × 1
9125 (Carrying case) × 1
PC Software × 1
Battery × 6
Quick manual × 1

KEW 6305-03

KEW 6305 × 1
KEW 8130 × 3 (1000A)
7141B (Voltage test lead set: 4pcs) × 1
7148 (USB cable) × 1
7170 (Power cord) × 1
8326-02 (SD card [2GB]) × 1
9135 (Carrying case) × 1
PC Software × 1
Battery × 6
Quick manual × 1

Specifications

Kyoritsu 6305 Digital AC Power Analyzer Specifications:

Wiring connections	1P2W, 1P3W, 3P3W, 3P3W3A, 3P4W
Measurements	Voltage, Current, Frequency, Active power
Parameters	Apparent power, Reactive power, Active energy, Apparent energy, Reactive energy, Power factor (cos θ), Neutral current
Voltage range[RMS]	150.0 / 300.0 / 600.0V
Voltage accuracy	±0.2%rdg±0.2%f.s. (sine wave, 45 – 65Hz)
Current range[RMS]	8128 ( 50A type ) : 1.000 / 5.000 / 10.00 / 25.00 / 50.00A / auto 8127 ( 100A type ) : 2.000 / 10.00 / 20.00 / 50.00 / 100.0A / auto 8126 ( 200A type ) : 4.000 / 20.00 / 40.00 / 100.0 / 200.0A / auto 8125 ( 500A type ) : 10.00 / 50.00 / 100.0 / 250.0 / 500.0A / auto 8124 ( 1000A type ) : 50.00 / 100.0 / 200.0 / 500.0 / 1000A / auto 8130 ( 1000A type ) : 50.00 / 100.0 / 200.0 / 500.0 / 1000A / auto 8129 ( 3000A type ) : 300.0 / 1000 / 3000A
Current accuracy	±0.2%rdg±0.2%f.s. + Accuracy of Clamp sensor (sine wave, 45 – 65Hz) (*) +1%f.s. at the lowest range
Display range	5 – 130% of each range(Voltage) 1 – 130% of each range(Current)
Crest factor	Voltage: up to 2.5, Current: up to 3.0 (with 90% fs or less)
Allowable input	±0.3%rdg±0.2%f.s. + Accuracy of Clamp sensor (*) +1%f.s. when the lowest current ranges is selected.
Effect of power factor	Active power: ±1.0%rdg cos θ=±0.5 (PF=1)
Frequency meter range	40.0 – 70.0Hz
Frequency meter accuracy	±3dgt
Accuracy precondition	PF=1, Sine wave, 45 – 65Hz, 23ºC±5ºC
Display update period	1 second
Applicable standards	IEC 61010-1 CAT III 600V
Operating temperature & humidity range	0 – +50ºC, less than 85%RH (without condensation)
Storage temperature & humidity range	-20 – +60ºC, less than 85%RH (without condensation)
Power supply (AC Line)	AC100 – 240V±10% (50/60Hz)
Power supply (DC battery)	LR6 or Ni-MH (HR-15-51) ×6 (Battery charger not included), Battery life approx. 15h (LR6)
Power consumption	10VA (max.)
communication interface	USB, Bluetooth
PC card interface	SD card (2GB)
Dimensions	175(L)×120(W)×65(D) mm
Weight	Approx. 800g (including batteries)
Included Accessories	7141B (Voltage test lead set: 4pcs) 7148 (USB cable) 7170 (Power cord) 9125 (Carrying case) 8326-02 (SD card 2GB) KEW WINDOWS (PC Software) Battery (LR6)×6 Quick manual
Optional Accessories	8124, 8125, 8126, 8127, 8128 (Clamp sensor) 8129/8130 (Flexible clamp sensor) 8312 (Power supply adaptor) 9132 (Magnetic carrying case)