HT Italia HT60 TRMS Digital Multimeter with Temperature

HT Italia HT60 TRMS Digital Multimeter with Temperature

The new series of HT professional multimeters is the result of an important research conducted at the most demanding users of this kind of equipment, namely laboratories where the choice of a measuring instrument is subject to strict tests concerning precision, reliability and safety of measurements even in extreme conditions. Therefore, a complete range multimeters, all able to measure in TRMS, all within CAT IV 600V, autorange function available on all models, with backlight display. The design is extremely modern and attractive, but also ergonomic, to ensure maximum ease of use. Display with high resolution, even in color version, for the premium model HT64.

HT Italia HT60 functions can be selected using the 7-position rotary switch, including an OFF position. The instrument is also provided with a HOLD function key to enable freezing the measured value on the display and to activate the display’s backlight, an Hz% key to select frequency and duty cycle tests, a REL key to carry out relative measurements and a MODE key to select resistance measurement, continuity test, diode test and capacity test. The selected quantity appears on the LCD display with the indication of the measuring unit and of the enabled functions. The instrument is also equipped with an Auto Power OFF device which automatically switches it off approx. 30 minutes after the last time the instrument was used. It is similar to the Fluke 110 and Fluke 114.

MEASURING AVERAGE VALUES ANDTRMS VALUES Measuring instruments of alternating quantities are divided into two big families:  AVERAGE-VALUE meters: instruments measuring the value of the sole wave at fundamental frequency (50 or 60 Hz).  TRMS (True Root Mean Square) VALUE meters: instruments measuring the TRMS value of the quantity being tested. With a perfectly sinusoidal wave, the two families of instruments provide identical results. With distorted waves, instead, the readings shall differ. Average-value meters provide the RMS value of the sole fundamental wave; TRSM meters, instead, provide the RMS value of the whole wave, including harmonics (within the instruments bandwidth). Therefore, by measuring the same quantity with instruments from both families, the values obtained are identical only if the wave is perfectly sinusoidal. In case it is distorted, TRMS meters shall provide higher values than the values read by average-value meters

HT Italia HT60 TRMS Digital Multimeter with Temperature Functions