Promotions
As professional multimeter HT Instruments JUPITER Multifunction Multimeter provides:
Autorange measurements with automatic AC/DC detection
LoZ low impedance voltage input to eliminate ghost voltage readings (caused by the capacitive coupling among active conductors close each other)
One-lead phase sequence detection
JUPITER is provided with ISO9000 calibration certificate as standard.
HT Instruments JUPITER Multifunction Multimeter Features:
- Autorange measurements with automatic AC/DC detection.
- DC, AC TRMS, AC+DC TRMS voltage up to 690V.
- Tripping time of RCDs type A and AC up to 300mA*.
- Tripping current of RCDs type AC up to 30mA. ›
- Non-trip earth ground resistance. ›
- Line-to-Neutral, Line-to-Line and Line-to-Ground impedance (resolution 0.1Ohm) with prospective short-circuit/fault current calculation.
- Current up to 3000A by means of clamp-on or flexible external transducer.
- Dynamic inrush current of motors and loads through the DIRC function allowing time base selection.
- Leakage current by means of the clamp-on transducer HT96U.
- Voltage and current harmonics with THD% calculation and function to the 25th Harmonic showing highest harmonic values first.
- One-lead phase sequence detection.
- Low impedance voltage input to eliminate ghost voltage readings.
- DC, AC TRMS, AC+DC TRMS current by means of external transducer.
- Frequency of voltage and/or current.
- Resistance and continuity with buzzer.
- MIN/MAX/PEAK/HOLD functions.
- 6000 count Display
HT Instruments JUPITER Multifunction Multimeter Functions:
| TRMS | |
| AC/DC voltage | 690V / AC+DC |
| LoZ Input | |
| AC/DC current | AC+DC with external clamp transducer |
| Frequency | |
| Resistance and continuity test with buzzer | |
| RCD tripping time | 30mA, 100mA, 300mA A/AC |
| RCD trip current measurement | RCD A/AC 30mA |
| Leakage current (with optional accessory HT96U) | |
| Non-trip earth resistance | |
| Voltage and current harmonics up to the 25th and THD% | |
| Loop impedance P-N, P-P, P-PE and calculation of prospective short-circuit current | |
| Electric motor starting current (INRUSH) | |
| Auto x1/2, x1, x2, x5, 0°, 180° | |
| Phase sequence | |
| Out come OK/NOT OK | According with IEC60364-6 |
| Backlit LCD display | |
| Measurement category | CAT IV 600V |
| Measuring counts | 6000 |
| MAX/MIN/HOLD | |
| Bargraph |
HT Instruments JUPITER Standard Accessories:
• C2033AU Three wire cable Red, Black, Green with Australian plug
• 4324-2 Pair of test tips Red/Black 2/4mm straight banana
• YABAT0001HT0 Alkaline battery 1.5V, type AAA, IEC LR03, 4 pcs
• YABRS0002HT0 Carrying bag
• YAMUM0066HT0 User manual on CD-ROM
• YAMUM0065HT0 Quick reference guide
• Calibration certificate ISO9000.
• 4324-2 Pair of test tips Red/Black 2/4mm straight banana
• YABAT0001HT0 Alkaline battery 1.5V, type AAA, IEC LR03, 4 pcs
• YABRS0002HT0 Carrying bag
• YAMUM0066HT0 User manual on CD-ROM
• YAMUM0065HT0 Quick reference guide
• Calibration certificate ISO9000.
HT Instruments JUPITER Optional Accessories:
• F3000U AC flexible clamp with 30/300/3000A full scales
• HT96U* AC current clamp with 1/100/1000A full scales
• HT97U* AC current clamp with 10/100/1000A AC full scales
• HT98U* DC current clamp with 1000A full scale
• HT4006 AC/DC current clamp with 40/400A full scales
• NOCANBA Hypertac-to-banana adapter* Adapter NOCANBA required.
• HT96U* AC current clamp with 1/100/1000A full scales
• HT97U* AC current clamp with 10/100/1000A AC full scales
• HT98U* DC current clamp with 1000A full scale
• HT4006 AC/DC current clamp with 40/400A full scales
• NOCANBA Hypertac-to-banana adapter* Adapter NOCANBA required.
