HT Italia HT9014 Clampmeter AC 600A TRMS, CAT IV 600V

HT_Italia_Ca

The HT Italia HT9014 clamp is designed for AC TRMS current measurement up to 600A, and AC/DC voltage to achieve safety CAT IV 1000V according to IEC/EN61010-1 safety standard. The HT Italia HT9014 has a large LCD 4 digit display (6000counts), with back light and bargraph for ease of reading in critical environments. The HT Italia HT9014 also performs resistance, continuity test, frequency, capacitance, diode test, duty cycle and temperature with type K probe measurements. The Auto PowerOFF feature is also available for the meter in order to preserve it’s internal battery charge.

Features:

TRMS measurement
AC current up to 600A
AC/DC voltage up to 1000V
“Voltsense” feature for AC voltage detection
Resistance
Continuity test with buzzer
Frequency with jaws and test leads
Capacitance
Diode test
Duty Cycle
Temperature with type K probe
Autorange
Data HOLD
MAX/MIN/ZERO
PEAK CURRENT (<10ms)
Backlight
Bargraph
Auto PowerOFF

HT 9014 Data Sheet

SKU: Ht Italia HT9014 Categories: Clampmeters, HT Italia Tags: Clampmeters, HT ITALIA

Description
Reviews (0)

HT Italia HT9014 Specifications:

HT Italia HT9014 Technical Specifications
ELECTRICAL SPECIFICATIONS
DC Voltage (Autorange) Range	600.0mV – 1000V
AC Voltage (Autorange) Range	6.000V – 1000V

HT Italia HT9014 GENERAL SPECIFICATIONS
Mechanical characteristics
Size	215(L) x 74(La) x 43(H)mm
Weight (including battery)	285g
Max conductor size	30mm
Supply
Battery type	1 battery 9V NEDA 1604 IEC 6F22 JIS 006P.
Battery life	about 200 hours.
Auto power OFF	about 15 minutes of idleness
Display
Characteristics	4 LCD (max 6000 counts), decimal point, unit symbol indication, bar graph and backlight
Sample rate	2 times/sec
Conversion mode	TRMS
Climatic conditions
Reference temperature	18°C ± 28°C
Operating temperature	5 ÷ 40 °C
Operating humidity	<80%RH
Storage temperature	-20 ÷ 60 °C
Storage humidity	<80%RH
Reference Standards
Comply with	IEC/EN 61010-1
Insulation	double insulation
Pollution	Level 2
For inside use, max height	2000m
Installation category	CAT IV 600V, CAT III 1000V to ground

This HT Italia HT9014 has been designed for use in an environment of pollution degree 2. Indoor use. • It measures CURRENT and VOLTAGE on CAT IV 600V and CAT III 1000V plants. For measurement categories please see § 1.4. • You must comply with the usual safety regulations aimed at protecting you against the dangerous electric current and protecting the instrument against an incorrect operation. • Only the leads supplied with the instrument guarantee compliance with the safety standards. They must be in good conditions and they must be replaced, if necessary, with an identical model. • Do not test or connect to any circuit whose voltage or current exceeds the specified overload protection. • Make sure that the batteries are installed correctly. • Before connecting the test probes to the installation, check that the function selector is positioned on the required measurement. • Make sure that the LCD and the range indicator show the same as the function desired