Extech EA10 Dual Input K Type Thermometer

Extech EA10 Features:

Type K Dual input
Compact and rugged design features large backlit display
Displays [T1 plus T2] or [T1-T2 plus T1] or [T1-T2 plus T2]
Selectable units of °F, °C, K (Kelvin)
Wide temperature range with 0.1°/1° resolution
Timer function displays elapsed time plus the time when MIN and MAX readings are taken
OFFSET key used for zero function to make relative measurements
Data Hold function freezes reading on display
Auto Power off to save battery life
Low battery and overrange indication
Records Max/Min readings for later recall
Complete with built-in stand, protective holster, two Type K bead wire temperature probes (-20 to 250°C), and 6 AAA batteries

Authorised Australian Distributor

SKU: Extech EA10 Category: Thermometers Tags: EXTECH, Thermometer

Description
Reviews (0)

Extech EA10

This device offers dual thermocouple inputs with multifunction LCD display. This meter is shipped fully tested and calibrated and, with proper use, will provide years of reliable service

MIN, MAX, AVG Recording Function with Timer

Press the MX/MN button to begin capturing the Minimum (MN), Maximum (MX), and Average (AVG) temperature values. The Elapsed Time clock will appear on the lower left of the display and the lower display will indicate the MAXIMUM (MX) value captured since the MX/MN button was pressed. Press the MX/MN button to change the lower display to reflect the stored MX to MN and then AVG value of the input selected in the upper display (T1, T2 or T1‐T2). Each reading will be accompanied by a Timer value indicating the time when each reading was recorded. Press the Time button to change the elapsed time format from min:sec to hour:min. Press and Hold the MX/MN button until the display returns to standard operation to exit the MX/MN function.

Data Hold

Press the HOLD button to freeze the reading in the display. The ‘H’ hold icon will appear on the upper left‐hand side of the display. Press the HOLD button again to return to normal operation (the ‘H’ hold icon will disappear).

Extech EA10 Specifications:

Measurement Specifications
Measurement Range	-200 to 1360°C
Resolution	0.1°C/°F <200°, 1°C/°F >200°
Accuracy (@23 ± 5°C)	±(0.3% reading + 5°C) @ -200°C to -93°C ±(0.3% reading + 1°C) @ -93°C to 1000°C ±(0.5% reading + 1°C) @ 1000°C to 1360°C
Temperature Coefficient	0.1 times the applicable accuracy specifications per °C from 0°C to 18°C and 28°C to 50°C
Note	Temperature accuracy does not include the accuracy of the type K probe.
Note	The temperature scale is based on the international temperature scale of 1990 (ITS90).
General Specifications
Display	Dual Display Multi-function LCD with Backlight
Input Protection	60VDC; 24VAC rms
Display Update Rate	1 per second
Over range indication	“OL” appears on the LCD
Open input indication	“OL” appears on the LCD
Low battery indication	“BT” appears on the LCD
Power supply	6 AAA Batteries
Battery life	Approximately 200 hours with carbon zinc batteries
Operating Temperature	0 to 50°C
Operating Humidity	< 80% RH
Storage Temperature	-10 to 60°C
Storage Humidity	10 to 80% RH
Dimensions	150 x 72 x 35mm
Weight	Approx. 235g with battery