FLIR MR40 Moisture Pen Features:
EASY TO USE
The FLIR MR40 Moisture Pen and Flashlight is equipped with a clear LCD display, a simple On/Off button with ‘Auto Power Off’, replaceable pins, and an audible indication of measured range, the MR40 is a simple and effective tool for reliable measurements.
CONVENIENT, PORTABLE, RUGGED DESIGN
The FLIR MR40 Moisture Pen and Flashlight is small enough to carry in your pocket, IP54 splash-proof rated, and 3-meter drop tested, so it’s always ready to work when — and wherever— you are.
RELIABLE AND ACCURATE MEASUREMENTS
The FLIR MR40 Moisture Pen has all the essential features you need to quickly verify moisture and determine the severity of the problem including a measurement ‘hold’ function and calibration/pin check integrated in the cap.
FLIR MR40 SPECIFICATIONS:
|Measurement Range||5% to 60% MC (Moisture Content)|
|Measurement Accuracy||5 to 30% MC (Moisture Content): +/- 2%
30- 60% MC (Moisture content): Reference only
Note: For materials other than Group 9/ Building Materials: plywood, drywall, and oriented strand board (OSB), download the MR40 Material Conversion Table Application Note above.
|Audible Indication||5-12%: Low Beep rate. 13-60%: Higher beep rate.
More than 60%: Highest Beep rate (Display OL)
|Calibration/ Pin Check, Integrated in Cap||16%|
|Work light||~40 lumens|
|Electrode pins||Integrated, Replaceable|
|Measurement Principle||Electrical Resistance|
|Power requirements||2 × AAA alkaline batteries|
|Battery life||70 Hrs w/o Flashlight|
|Battery status indicator||4 Bar battery icon|
|Auto Power Off (APO)||3 minutes|
|Drop test||3 m|
|Ingress Protection Rating||IP54 Splash Proof|
|Operating temperature||-10 to 60°C|
|Weight||80g (2.8 oz) with Battery|
|Dimensions (H × W × L)||193 x 26 x 31 mm|
|Material||PC-ABS with TPE Overmold|