Promotions
FLIR CM94 2000A AC/DC Utility Clamp Meter
Designed with a CAT IV-1000 V safety rating, the FLIR CM94 2000A clamp Meter is ready to work on relays, distribution panels, and switchgear as well as service conductors, feeders, and production power lines. VFD mode allows you to tackle noisy signal environments to ensure correct measurements when working on large motors and motor controls. Utilities and industrial electrical technicians demand the best, and FLIR delivers with the rugged and dependable CM94 clamp meter
The FLIR CM94 2000A clamp meter is designed to tackle high-current measurements in demanding utility and industrial job sites. The FLIR CM94 has an oversized, 55 mm jaw that can securely clamp around conductor wires and busbars for accurate readings up to 2000 A AC & DC.
GREATER SAFETY SO YOU CAN FOCUS ON RESULTS
Get the right tool for high current jobs with improved safety built in
• CAT IV-1000 V rating protects from dangerous transient overvoltage near utility service equipment
• Get accurate current readings on high current equipment up to 2000 A AC/DC
• Eliminate errors from residual ghost voltage using LoZ (low impedance) mode
PACKED WITH THE FUNCTIONS YOU NEED
This full-featured clamp meter saves time and helps you troubleshoot effectivel
• Trust accurate AC voltage and current measurements with True RMS, LoZ, and VFD mode to filter signal noise
• Troubleshoot connections and components with a Continuity test mode
• Measure resistance, frequency, and temperature
• Work your way with both auto- and manual ranging settings
THE RIGHT TOOL FOR INDUSTRIAL JOBS
The FLIR CM94 features an oversized jaw to clamp around large conductors or multiple conductors
• Generous jaw opening of 55 mm (2.2 in)
• Perfect for industrial electricians, utility workers, and electrical contractors
• Ergonomic design is easy to hold with thumb dial for one-hand operation
• Bright, large backlit 6000 count display that’s easy to read in any condition
FLIR CM94 Specifications: | |||
| Safety category rating | CAT IV-1000 V | ||
| True RMS | Yes | ||
Features | |||
| Data hold | Yes | ||
| Relative DC zero | Yes | ||
| LoZ mode (auto range) | Yes | ||
| VFD | Yes | ||
| Jaw size | 55 mm (2.2 in) max | ||
| Non-contact voltage (NCV) | Yes | ||
| Measurement and analysis | Range & resolution | Basic accuracy | |
| AC current | 200.0, 2000 A | ±2% | |
| DC current | 200.0, 2000 A | ±2% | |
| AC voltage | 6.000, 60.00, 600.0, 1000 V | ±1.2% / 5d | |
| AC voltage (digital low pass filter – VFD) | 6.000, 60.00, 600.0, 1000 V | ±2% | |
| LoZ mode AC voltage | 6.000, 60.00, 600.0, 1000 V | 1.5% | |
| DC voltage | 6.000, 60.00, 600.0, 1000 V | ±0.5% | |
| LoZ mode DC voltage | 6.000, 60.00, 600.0, 1000 V | 1.3% | |
| Frequency | 40.00 Hz to 400.0 Hz (ACA) 50.00 Hz to 400.0 Hz (ACV) | ±1% ±1% | |
| Resistance | 600.0, 6.000 k, 60.00 kΩ 600.0 kΩ 6.000 M 40.00 MΩ | ±0.5% ±0.8% ±1.2% ±2.3% | |
| Diode test | 1.000 V | ±1.0% | |
| Capacitance | 60.00 nF, 600.0 nF, 6.000 µF, 60.00 µF, 6000.0 µF, 2000 µF | ±2.0% | |
| Temperature | -50°C to 1000°C (-58°F to 1832°F) | ±0.3% | |
| Continuity | 10 to 200 Ω, 2 kHz buzzer | ||
Display | |||
| Screen | 3-5/6 digits 6000 counts 3-½ digits 1999 counts for Hz | ||
| Backlight | Yes | ||
| Auto power off | 34 minutes | ||
| Overload indication | “OL” or “-OL” | ||
| Low battery indication | Yes | ||
General | |||
| Operating temperature | -10°C to 50°C (14°F to 122°F) | ||
| Operating relative humidity | Maximum relative humidity 80% for temperature up to 31°C (88°F) decreasing linearly to 50% relative humidity at 50°C (122°F) | ||
| Storage temperature | -20°C to 60°C (-4°F to 140°F) <80% RH (with battery removed) | ||
| Drop Test | 2 m (6.5 ft) | ||
| IP rating | IP40 | ||
| Certifications | UL, CE, CSA, RCM | ||
| Battery type | 2× AA | ||
| Size (L × W × H) | 269 × 106 × 51 mm (10.6 × 4.2 × 2.0 in) | ||
| Weight | 700 g (24.7 oz) | ||
| Box contents | Test lead set, quick start guide, manual, soft carrying pouch, banana plug Type-K thermocouple | ||
