Promotions
The REED R2005 Infrared Thermometer allows user to measure temperature in both IR non-contact mode and Type-K thermocouple contact measurements. Used for temperature non-contact measurements, the REED R2005 Infrared Thermometer is able to provide a very good spectral response, an exceptional dealing with moving objects, very good response time and a most convenient temperature range for the measurements (from -50.0 to 1050.0°C)
Considering the surface type which will be measured, the REED R2005 Infrared Thermometer can be used like a K-type digital thermometer. During the contact measurements, Reed R2005 can provide fast, reliable and accurate temperature contact measurements with also a very good response time.
Using the REED R2005 Infrared Thermometer
Food preparation, safety and fire inspectors, plastic molding, asphalt, marine and screen printing, measure ink and dryer temperature, HVAC/R, diesel, fleet maintenance and much more
Data Logger
The Reed Portable Gun thermometer is capable of storing up to 20 data locations. During the recording the infrared temperature and temperature scale (°C or °F) are also stored. You can store values during the infrared reading. While holding the trigger, press the MODE button until LOG appears in the lower left corner of the display; a log location number will be shown. If no temperature has been recorded in the shown LOG location, 4 dashes will appear in the lower right corner. Aim the unit at the target area you want to record, and press the laser/backlight button. The recorded temperature will appear in the lower right corner. To select another log location, press the up and down keys.
Recalling Data
To recall stored data after the unit shuts off, press the MODE button until LOG appears in the lower left corner. A LOG location number will be shown below LOG, and the stored temperature for that location will be displayed. To move to another LOG location, press the UP and Down keys.
Measurement operations
Hold the meter by its handle grip and point it toward the surface . to be measured. Pull and hold the trigger to turn the meter on and begin testing. . The display will light if the battery is good. Replace the battery . if the display does not light. While measuring, the SCAN display icon will appear in the upper left corner of the LCD. Release the trigger and the HOLD icon will appear on the LCD . indicating that the reading is being held. The meter will automatically power off approximately 7 seconds after the trigger is released. Unless the unit is locked on.
How to obtain Emissivity?
In the EMS mode, press and hold the Laser/Backlight button until . the “EMS” icon on the left side of LCD blinking. At this time, “ 3 = –” . will appear at the upper side of the LCD; IR temperature value will be in the middle of LCD; and Type K temperature value is at the lower side of the LCD.Contact the Type K probe to the object surface and test the temperature of same point with IR measurement. After both values are stable, press UP or DOWN button for confirmation. Then, emissivity of the object will be shown at the upper side of the LCD. Press MODE button or trigger to enter normal measurement.
REED R2005 Infrared Thermometer Specifications:
| Reed R2005: Temperature range | |
| Type K Temperature Range: | -50.0 to 1370°C (-58.0 to 2498°F) |
| IR Temperature Range: | -50.0 to 1050.0°C (-58.0 to 1922.0°F) |
| Reed R2005: Resolution | |
| Type K Resolution: | 0.1°C: -50 to 1370°C 0.1°F: -58 to 1999.9°F 1°F: 2000 to 2498°F |
| IR Resolution | 0.1°C (0.1°F) |
| Reed R2005: Accuracy | |
| Type K Accuracy | ±1.5% rdg. +3°C (+5°F): -50 to 1000°C (-58 to 1832°F) ±1.5% rdg. +2°C (3.6°F): 1000 to 1370°C (1832 to 2498°F) |
| IR Accuracy | ±5°C (±9°F): -50 to -20°C (-58 to -4°F) ±1.5% rdg. +2°C (+3.6°F): -20 to 200°C (-4 to 392°F) ±2.0% rdg. +2°C (+3.6°F): 200 to 538°C (392 to 1000°F) ±3.5% rdg. +5°C (+9°C): 538 to 1050°C (1000 to 1922°F) |
| Optical Resolution | 30:1 |
| Spectral Response: | 8 to 14 µm |
| Emissivity: | Digitally adjustable from 0.10 to 1.0 |
| Laser: | Output < 1mW, wavelength 630~670nm, Class II diode laser |
| Response Time: | < 1 second |
| Power Supply: | Single 9V battery |
| Dimensions: | 100 x 56 x 230mm (39. x 2.2 x 9.0″) |
| Weight: | 290g (10.2 oz) |
