KYORITSU 2033 AC/DC 300 Amp Clampmeter

 

KYORITSU 2033 AC/DC 300 Amp Clampmeter Specification:

AC Current   0A to 40A 20A to 200A 200A to 300A 50/60Hz ±1% of rdg ±4 dgts ±1.5% of rdg ±4 dgts ±3.5% of rdg 0A to 40A 20A to 200A 200A to 300A 20Hz to 1kHz ±2.5% of rdg ±4 dgts ±2.5% of rdg ±4 dgts ±4.0% of rdg DC Current 0A to 40A 20A to 200A 200A to 300A ±1% of rdg ±4 dgts ±1.5% of rdg ±4 dgts ±3.0% of rdg Conductor Size 24mm maximum Safety Standard IEC 61010-1 CAT III 300V IEC 61010-2-032 Frequency Response DC, 20Hz to 1kHz Withstand Voltage 3700V AC for 1 minute Power Source Two (2) type ‘AA’ LR44 Alkaline 1.5V batteries Dimensions 147mm (L) x 59mm (W) x 25mm (D) Weight 100g approx.

 

Note : ◇During current measurement, keep the KYORITSU 2033 transformer jaws fully closed. Otherwise,accurate measurement cannot be made. The maximum measurable conductor size is approx. 24mm in diameter. ◇Unlike in DC current measurement, zero adjustment is not necessary in AC current measurement. There is no polarity in the reading either.

KYORITSU 2033 Sleep Function.

This is a function to prevent the instrument from being left powered on in order to conserve battery life. This function causes the instrument to go into the Sleep (powered-down) mode about 5 minutes after the last switch or button operation. To exit the Sleep mode, turn the Function Selector switch back to “OFF”, then to any other position, or press any button.