FLUKE 28 II Ex Intrinsically Safe True RMS Digital Multimeter

$0.00

The FLUKE 28 II Ex Intrinsically Safe True RMS Digital Multimeter can be used in a wide range of hazardous settings.

Features:

  • A completely sealed, IP67 rated case
  • Withstands drops up to 10 ft or 3 m (with holster)
  • Dustproof per IEC 60529 IP6x
  • Waterproof per IEC 60529 IPx7
  • CAT III 1000 V, CAT IV 600 V
  • Reversible holster for added protection of the display when not in use

    Fluke 28II Ex User Manual

 

If you would like more information regarding this product, simply email us here.

  • Enter your query
  • Drop files here or
    Accepted file types: jpg, gif, png, pdf, Max. file size: 1 MB, Max. files: 4.
    • This field is for validation purposes and should be left unchanged.

    FLUKE 28 II Ex Intrinsically Safe True RMS Digital Multimeter

    Now there’s an intrinsically safe digital multimeter (DMM) you can use in a wide range of hazardous settings. Whether you work in petroleum, chemical, or pharmaceutical environments, the 28 II Ex gives high-end test and troubleshooting power you need is packed into the most rugged intrinsically safe (IS) DMM Fluke has ever built: drop-proof, waterproof, dust-proof (IP67).

    All the measurement functions of our most popular industrial DMMs

    One tool equips you with all the testing and troubleshooting power you need wherever you go––inside or outside ATEX zones 1 or 2,. No need to carry different meters for different areas, or worry about crossing through an Ex-required zone with a non-Ex rated instrument.

    • 4-1/2 digit mode for precise measurements (20 000 counts)
    • True-rms ac voltage and current for accurate measurement on nonlinear signals
    • Measures up to 1000 V and 10A AC and DC (note that Ex zones require reduced measurements)
    • Low pass filter ensures accurate voltage and frequency measurements on variable speed motor drives (VSDs)
    • Frequency to 200 kHz and % duty cycle to help you diagnose VSDs and switching power supplies
    • Resistance, continuity and diode test
    • 10 000 μF capacitance range for components and motor caps
    • Conductance measurements for high resistance or leakage tests
    • Min/Max-Average and Peak capture to record transients and variations automatically
    • Relative mode to remove test lead interference on resistance measurements
    • Auto and manual ranging for maximum flexibility
    • Input Alert protects you by chirping and flashing “Lead when leads are plugged into the wrong inputs

    Easy to use

    Important extras keep you productive all day long in less than optimal conditions.

    • Backlit keypad buttons provide extra visibility in poorly lit areas, even when you’re wearing full PPE
    • Large display digits and 2-level bright white backlight also increases visibility
    • Long battery life – 400 hours typical without backlight (Alkaline)
    • Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks

    Easy to service in the field

    Access to the separate battery compartment makes it easy to change batteries or fuses without jeopardizing instrument calibration.

    Fluke 28 II Ex Specifications

    Accuracy Specifications
    Accuracy specifications are shown as ±(% of reading + number of digits)
    DC voltage Range 0.1 mV to 1000 V
    Accuracy ±(0.05% + 1)
    AC voltage Range 0.1 mV to 1000 V
    Accuracy ±(0.7% + 4)
    DC current Range 0.1 μA to 10 A
    Accuracy ±(0.2% + 4)
    AC current Range 0.1 μA to 10 A
    Accuracy ±(1% + 2)
    Resistance Range 0.1 Ω to 50 MΩ
    Accuracy ±(0.2% + 1)
    Conductance Range 60.00 nS
    Accuracy ±(1.0% + 10)
    Diode test Range 2.0 V
    Accuracy ±(2.0% + 1)
    Duty cycle Range 0.0% to 99.9%
    Accuracy Within ±(0.2% per kHz + 0.1%) for rise times <1 µs
    Capacitance Range 10 nF to 9999 μF
    Accuracy ±(1% + 2)
    Frequency Range 0.5 Hz to 199.99 kHz
    Accuracy ±(0.005% + 1)
    Temperature Range -200°C to +1090°C
    Accuracy ±(1% + 10)°C
    Display counts 6000 counts/19,999 counts in high-resolution mode
    Peak capture Record transients up to 250 us
    Min/Max/Avg recording Display signals up to approximately 100 ms
    Accuracy specifications are shown as ±(% of reading + number of digits)
    Safety Certifications
    ATEX {Ex} II 2G Ex ia IIC T4 Gb
    {Ex} I M1 Ex ia I Ma
    NEC-500 Class I, Div 1, Groups A-D, 130°C
    IECEx Ex ia IIC T4 Gb
    Ex ia I Ma
    GOST R Ex 1Ex ia IIC T4 Gb X
    PO Ex ia I Ma X
    IP6X
    General Specifications
    Power
    Three AAA batteries
    Battery life: 400 hours
    Display LCD, with backlight
    External protection Rubber holster
    Warranty Three years
    Size with holster (H x W x L) 6.4 x 10.0 x 19.8 cm
    Weight with holster 700 g

     

    announcement  EOFY specials It's that time of the year again - the end of financial year! And here at Rapid-Tech, we've got some amazing EOFY specials for all our customers.