Its high accuracy, uniformity and stability is due to the fact that TA-1200PLAB high temperature calibrator has three control zones, allowing better distribution of temperature throughout the block and ensuring a better radial and axial uniformity through the extension of the 100 mm of measurement zone.

TA-1200PLAB incorporates concepts of automatic calibration with calibration management softwares, especially with the Isoplan® Software, such as issuing reports and certificates, task management, calibration data organization and archiving etc.

The post High Temperature Furnace for your thermocouple calibrations | TA-1200PLAB appeared first on rapid-tech.

As well as providing high accuracy temperature values, it also allows the measurement of signals generated by thermo-elements which are being calibrated. This is possible due to an embedded calibrator specific for these types of signal, including 4-20 mA. Thus, they incorporate the functions of dry block, standard thermometer and calibrator for RTD, TC and mA.

• T-650PH calibrator model generates temperatures from room temperature to 650ºC (1202ºF).
• Present input for thermocouples, RTDs, thermoswitches. Besides generating temperature, they measure the signal from the sensor being calibrated.
• Dry block and black body inserts.
• Allows the control of the dry block temperature by using an external probe (optional). The temperature calculation uses Callendar-Van Dusen coefficients.
• Make no use of external standard thermometer.
• Carries out completely automatic calibrations with or without the use of a computer.
• Accuracy to 0.1ºC ± 0.1% of reading, stability of 0.05ºC and resolution of 0.01ºC.
• Documenting capabilities: communication with computer and ISOPLAN Calibration Software.
• Portable, compact, provide interchangeable inserts and carrying case.

It presents a wide variety of programming resources, allowing the performance of automatic calibrations of thermocouples, RTDs, thermoswitches. In this case, the sensor is placed in the insert and their electrical terminals are connected to the embedded calibrator. The operator defines the calibration points and the number of repetitions, then the process is started and all the sequence is automatically accomplished.

Another way of performing automatic documented calibrations is by means of ISOPLAN Calibration Software for PC/WindowsTM, which uses RS-232 or RS-485 serial communication to connect the computer to the dry block. With ISOPLAN it is possible to register sensors and instruments of a factory, generate work orders, create and print calibrations certificates and reports, that is, it brings all advantages of computer data management to the calibration environment.

T-650PH has also many other features:

·   The electric signal calibrator is independent from the dry block function.
·   Internal buzzer beeps when the temperature reaches the desired value.
·   Keypad that eases the operation and configuration of the calibrator.
·   Graphic Fluorescent vacuum display to present big-size digit numbers.
·   Thermo-element reading scaled to ITS-90 or IPTS-68.
·   Internal regulated 24 Vdc power supply for 2-wire transmitters.
·   Internal  rechargeable  battery  and  battery  charger  included  in  the  electric  signal calibrator.
·   Independent circuitry for over-temperature protection and safety.
·   Insert to choose, carrying case, strap and test leads included.

Basic Specifications:

The post PRESYS T-650PH Multifunction Temperature Calibrator appeared first on rapid-tech.

Another way of performing automatic documented calibrations is by means of ISOPLAN Calibration Software for PC/Windows^TM, which uses RS-232 or RS-485 serial communication to connect the computer to the dry block. With ISOPLAN it is possible to register sensors and instruments of a factory, generate work orders, create and print calibrations certificates and reports, that is, it brings all advantages of computer data management to the calibration environment.

The Presys TE-1200P have also features:

• The electric signal calibrator is independent from the dry block function.
• Internal buzzer beeps when the temperature reaches the desired value.
• Keypad that eases the operation and configuration of the calibrator.
• Graphic liquid crystal display to present big-size digit numbers.
• Thermo-element reading scaled to ITS-90 or IPTS-68.
• Internal regulated 24 Vdc power supply for 2-wire transmitters.
• Internal rechargeable battery and battery charger included in the electric signal calibrator.
• Independent circuitry for overtemperature protection and safety.
• Insert to choose, carrying case, strap and test leads included.

Technical Specifications

The post PRESYS TE-1200P Dry Block Temperature Calibrator appeared first on rapid-tech.

The PRESYS TE-350P / TE-650P Dry Block Calibrators control temperature over an insert in order to calibrate thermocouples, thermoresistances, glass thermometers, thermoswitches etc.

PRESYS TE-350P / TE-650P / Dry Block Calibrators beside providing high accuracy temperature values, also allow the measurement of signals generated by the thermocouples, thermoresistances and thermoswitches, which are being calibrated. This due to an embedded calibrator specific for these types of signals, including 4-20 mA.

The PRESYS TE-350P / TE-650P dry block calibrators generate temperature in the insert in order to calibrate thermocouples, RTDs, glass thermometers, thermo-switches. Besides providing high accuracy temperature values, it also allows the measurement of signals generated by the thermo-element which is being calibrated. This is possible due to an embedded calibrator specific for these types of signal, including 4-20 mA. Thus, they incorporate the functions of dry block, standard thermometer and calibrator for RTD, TC and mA.

• TE-350P calibrator model generates temperatures from ambient to 350°C (662°F).
• TE-650P calibrator model generates temperatures from ambient to 650 ºC (1202 ºF).

They present a wide variety of programming resources, allowing the performance of automatic calibrations of thermocouples, thermoresistances, thermoswitches. In this case, the sensor is placed in the insert and their electrical terminals are connected to the embedded calibrator. The operator defines the calibration points and the number of repetitions, then the process is started and all the sequence is automatically accomplished.

The PRESYS TE-350P / TE-650P also many features:

• Use of internal standard thermometer.
• Accuracy to 0.1 ºC, stability of 0.02 ºC and resolution of 0.01ºC.
• Engineering units configurable to °C and °F.
• RTD input for 2, 3 and 4 wires.
• Inputs for mA, thermocouples and thermo-switches.
• Thermo-element reading scaled to ITS-90 or IPTS-68.
• Internal regulated 24 VDC power supply for 2-wire transmitters.
• The electric signal calibrator is independent from the dry block function.
• Carry out completely automatic calibrations without the use of a computer.
• Internal buzzer beeps when the temperature reaches the desired value.
• Keypad to ease the operation and configuration of the calibrator.
• Graphic liquid crystal display.
• Independent safety circuit for over-temperature protection.
• Insert to choose, strap and test leads included.
• Optional carrying case.

Similar to the Fluke 9103 and Fluke 9140 Field Dry-Well.

TR-350P / TE650P Technical Specifications:

Input Technical Specifications

Accuracy values are valid within one year and ambient temperature range from 20 to 26 ºC. Outside these limits add 0.001 % FS / ºC, taking 23 ºC as the reference temperature. For thermocouples with internal cold junction compensation, add a cold junction compensation error of ± 0.2 ºC or ± 0.4 ºF.

The post PRESYS TE-350P / TE-650P Dry Block Calibrator appeared first on rapid-tech.

PRESYS T-350P / T-650P Dry Blocks present a wide variety of programming resources, allowing the performance of automatic calibrations of thermocouples, thermoresistances, thermoswitches. In this case, the sensor is placed in the insert and their electrical terminals are connected to the embedded calibrator. The operator defines the calibration points and the number of repetitions, then the process is started and all the sequence is automatically accomplished.

Another way of performing automatic documented calibrations is by means of CS‑504 Calibration Software for PC/Windows^TM, which uses RS-232 or RS-485 serial communication to connect the computer to the dry block. With CS-504 it is possible to register sensors and instruments of a factory, generate work orders, create and print calibrations certificates and reports, that is, it brings all advantages of computer data management to the calibration environment.

PRESYS T-350P / T-650P Dry Blocks have also many other features, including:

• The electric signal calibrator is independent from the dry block function.
• Internal buzzer beeps when the temperature reaches the desired value.
• Keypad that eases the operation and configuration of the calibrator.
• Graphic liquid crystal display to present big-size digit numbers.
• Thermo-element reading scaled to ITS-90 or IPTS-68.
• Internal regulated 24VDC power supply for 2-wire transmitters.
• Internal rechargeable battery and battery charger included in the electric signal calibrator.
• Independent circuitry for over-temperature protection and safety.
• Insert to choose, carrying case, strap and test leads included. If the insert is not specified, it will be provided the insert type IN01.
• Cup like insert with 3/4” hole (hole does not reach the bottom) together with a set of tiny balls made of steel used for fulfillment included.

PRESYS T-350P / T-650P Dry Blocks Technical Specifications:

Accessories – Insert:

Note: When asked, the calibration certificate will be provided for the first insert ordered.

The post PRESYS T-350P / T-650P Dry Blocks for Temperature Calibration appeared first on rapid-tech.

PRESYS TA-1200P Dry Block Calibrator Features:

• TA-1200P calibrator model generates temperatures from 50 ºC (122 ºF) to 1200 ºC (2192 ºF).
• Presents inputs for mA, thermocouples, RTDs and thermo-switches.
• Carries out completely automatic calibrations with or without the use of a computer.
• Accuracy to ± 3 ºC, stability of 0.2 ºC and resolution of 0.1 ºC.
• Hart^®Communicator (optional) with internal resistance configurable, transmitter power supply and latest DD as option.
• Portable, compact, provides interchangeable inserts and carrying case.

The calibrator also provides an input for an external probe to perform the temperature measurement from a standard sensor (optional) inserted in the same measuring zone of the sensor to be calibrated, increasing the accuracy and decreasing loading effects. The standard sensor calibration curve follows the parameterization of ITS‑90.

It presents a wide variety of programming resources, allowing the performance of automatic calibrations. In this case, the sensor is placed in the insert and its electrical terminals are connected to the embedded calibrator. The operator defines the calibration points and the number of repetitions (task), then the process is started and all the sequence is automatically accomplished. After completing the task, a Calibration Report is issued and it can be printed directly in a USB connected printer or can be generated a PDF document.

It has HART® communication for reading and setting parameters of field devices that have this protocol.

PRESYS TA-1200P Dry Block Calibrator has also many other features, such as:

• RTD input for 2, 3 and 4 wires. Table IEC 60751, JIS or Callendar‑Van Dusen user‑configurable. Engineering units configurable to °C, °F and K.
• Built in Web Server, Ethernet communication.
• USB port for software/firmware upgrade.
• HART^® Communication Protocol (optional).
• The electric signal calibrator is independent from the dry block function.
• Display indication when the temperature reaches the desired value.
• 7 inches touchscreen display that eases the operation and configuration of the calibrator.
• Thermo-element reading scaled to ITS-90 or IPTS-68.
• Internal regulated 24 Vdc power supply for 2-wire transmitters.
• Independent circuit for over-temperature protection and safety.
• Insert to choose, carrying case, handles and test leads included. If the insert is not specified, it will be provided the insert type IN06.

Presys TA-1200P Specification:

Input Technical Specifications

*FS = Full Scale

Accuracy values are valid within one year and temperature range of 20 to 26 °C. Outside these limits add 0.001 % FS / °C taking 23 °C as the reference temperature. For thermocouples, using the internal cold junction compensation add a cold junction compensation error of ± 0.2 °C or ± 0.4 °F max.

PRESYS TA-1200P Ordering Information:

The post PRESYS TA-1200P Dry Block for Temperature Calibration appeared first on rapid-tech.

PRESYS TA-350P / TA-650P Dry Block Feature:

• The TA-350P and TA-650P models generate from ambient temperature to 350 ºC and 650 ºC, respectively, with a resolution of 0.01 ºC.
• Optional temperature measurement and control by external probe with Callendar-Van Dusen coefficients.
• Using the internal reference, accuracy of up to ±(0.1 ºC + 0.1 % of reading).
• Using the external probe, accuracy of up to ±0.07 °C for TA-350P and ±0.10 °C for TA-650P.
• Using an external thermometer such as Presys Super Thermometer PT-511, accuracy of up to ±0.05 ºC.
• Stability of ±0.05 ºC.
• Uniformity of ±0.05 ºC.
• Input for RTD, thermocouples and thermoswitches.
• Internal regulated 24 Vdc power supply and mA input for 2-wire transmitters.
• External reference thermometer not necessary.
• Completely automatic calibration with or without the use of a computer.
• Documenting capabilities: connection with computer and ISOPLAN calibration software.
• Portable, compact, with carrying case and interchangeable inserts.

The post PRESYS TA-350P / TA-650P Dry Blocks for Temperature Calibration appeared first on rapid-tech.

This is possible due to an embedded calibrator specific for these types of signal, including 4-20 mA. Thus, it incorporates the functions of dry block, standard thermometer and calibrator for RTD, TC and also mA. The calibrator also includes an external probe input to allow the temperature control from a standard PRT sensor (optional) placed in the insert together with the sensors to be calibrated. The sensor calibration curve is configured according to the Callendar-Van Dusen parametrization.

PRESYS T-25N Features:

• The T-25N calibrator model generates temperatures from -25  ºC to 125 ºC (-13 ºF to  257 ºF).
• Presents input for thermocouples, thermoresistances, thermoswitches. Besides generating temperature, it measures the signal from the sensor being
• Allows the control of the dry block temperature by using an external probe (optional). The temperature calculation uses Callendar-Van Dusen
• Makes no use of external standard
• Carries out completely automatic calibrations with or without the use of a
• Accuracy to 0.1 ºC, stability of 0.02 ºC and resolution of 0.01 ºC.
• Documenting capabilities: communication with computer and the ISOPLAN-5 Calibration
• Portable, compact, provides interchangeable inserts and carrying

It presents a wide variety of programming resources, allowing the performance of automatic calibrations of thermocouples, thermoresistances, thermoswitches. In this case, the sensor is placed in the insert and its electrical terminals are connected to the embedded calibrator. The operator defines the calibration points and the number of repetitions, then the process is started and all the sequence is automatically accomplished.

Another way of performing automatic documented calibrations is by means of ISOPLAN® calibration software for PC/Windows^TM which uses the RS-232 serial port to connect PC to the dry block. With ISOPLAN® it is possible to register sensors and instruments of the factory, generate work orders, create and print calibration certificates and reports, i.e., it brings all the advantages of computer data management to the calibration environment.

PRESYS T-25N has many other features, such as:
 The electric signal calibrator is independent from the dry block function.
 Internal buzzer beeps when the temperature reaches the desired value.
 Keypad that eases the operation and configuration of the calibrator.
 Graphic liquid crystal display to present big-size digit numbers.
 Thermo-element reading scaled to ITS-90 or IPTS-68.
 Internal regulated 24 vdc power supply for 2-wire transmitters.
 Internal rechargeable battery and battery charger included in the electric signal
calibrator.
 Independent circuitry for over-temperature protection and safety.
 Insert to choose, carrying case, strap and test leads included. If the insert is not
specified, it will be provided the insert type IN01.
 Cup like insert with 3/4” hole (hole does not reach the bottom) together with a set of
tiny balls made of steel used for fulfillment included.

Similar to and an alternative to the Fluke 9103 Field Dry Well Calibrator or Dry Block Calibrator.

PRESYS TE-25N Dry Block Calibrator General Specifications:

• Ambient Temperature: 20ºC.

Please Note: Achieving a temperature of -25 ºC with this calibrator depends on laboratory temperature and humidity conditions where the calibrations are performed. In general, it is possible to reach it for room temperature of 20 ºC and relative humidity less than 60%.

PRESYS TE-25N Dry Block Calibrator Technical Specifications:

The post PRESYS TE-25N Dry Block Calibrator appeared first on rapid-tech.

This is possible due to an embedded calibrator specific for these types of signal, including 4-20 mA. They incorporate the function of dry block, standard thermometer and calibrator for RTD and TC sensors, besides mA reading.

They present a wide range of programming resources, allowing them to perform automatic calibration of the sensors. In this case, the sensor is placed in the insert and its electrical terminals are connected to the embedded calibrator, the operator defines the calibration points and the number of repetitions, then the process is started so that all the sequence is automatically accomplished.

Another way of performing automatic documented calibrations is by means of ISOPLAN-5 calibration software for PC/Windows™ which uses the RS-232 serial port to connect PC to the dry block. With ISOPLAN-5 it is possible to register sensors and instruments of the factory, generate work orders, create and print calibration certificates and reports, that is, it brings all the advantages of computer data management to the calibration environment.

PRESYS T-25N / T-35N / T-50N Technical Specifications:

PRESYS T-25N / T-35N / T-50N Electrical Input Ranges Specifications

FS = Full Scale
PRESYS T-25N / T-35N / T-50N Ordering Codes:Accuracy values are valid within one year and ambient temperature range from 20 to 26 °C. Outside these limits add 0.001 % FS / °C, taking 23 °C as the reference temperature. For thermocouples with internal cold junction compensation, add a cold junction compensation error of ± 0.2 °C or ± 0.4 °F.

The post PRESYS T-25N / T-35N / T-50N Dry Blocks for Temperature Calibration appeared first on rapid-tech.

PRESYS TA-25N / TA-35N / TA-50N Dry Block Calibrator Features:

• TA-50N generates the coolest temperature provided by a dry block. It reaches –50 ºC in an ambient temperature of 23 ºC, with no need of well insulator and no need to place it in a low temperature room.
• Optional temperature measurement and control by external probe with Callendar-Van Dusen coefficients.
• Accuracy of up to ±0.1 ºC with the internal reference, ±0.07 ºC with the external probe or ±0.05 ºC using an external thermometer such as Presys Super Thermometer PT-511.
• Resolution of 0.01 ºC.
• Stability of ±0.02 ºC for the entire range of temperature.
• Input for RTD, thermocouples and thermoswitches.
• Internal regulated 24 Vdc power supply and mA input for 2-wire transmitters.
• External reference thermometer not necessary.
• Completely automatic calibration with or without the use of a computer.
• Documenting capabilities: connection with computer and ISOPLAN-5 calibration software.
• Portable, compact, with carrying case and interchangeable inserts.

Similar to and an alternative to the Fluke 9140 series Field Metrology Wells (Fluke 9142, Fluke 9143 & Fluke 9144).

PRESYS TA-25N / TA-35N / TA-50N Dry Block Calibrators Accessories:

PRESYS TA-25N / TA-35N / TA-50N Dry Block Calibrators Order Codes:

The post PRESYS TA-25N / TA-35N / TA-50N Dry Block Calibrators appeared first on rapid-tech.