CYBERTEK CTA200 Current Transducer 200A/500kHz

The CTA series are a ultra-accuracy transducer that can measure both DC and AC. Its current range covers from 60A to 1000A with precision of 0.03% and 800 kHz bandwidth.

By using the Flux-gate technique, the CTA series realised high accuracy measurement, excellent linearity, low DC offset, lower temperature drift, low insertion loss, high immunity to external field and low noise.

CTA series transducer includes CTA60(60A)，CTA200(200A)，CTA700(700A) and CTA1000(1000A). CTA60 and CTA200 have measurement aperture of 26mm; CTA700 and CTA1000 have measurement aperture of 30mm. CTA series transducers have standard 9 pin D-Sub male interface and LED Indicator, making the system not only easy to use but also reliable.

CYBERTEK CTA200 Current Transducer Specifications:
Test temperature: 25℃; Voltage Supplied: ±Uc =±15V

Type		CTA200
Primary nominal continuous Direct current  (IPN DC)		200A
Primary nominal rms current (IPN)		141A
Primary current, measuring range (IPM)		±200A
Conversion ratio KN		1:1000
Secondary current (IS)		±200mA
Accuracy (DC,50/60Hz sine wave)		≤±(0.03% of the readings +30uA)
Bandwidth(±3dB)		500kHz
Measuring resistance over operating current temperature and supply voltage range		RM min	RM max
		0	30Ω
		Figure 1
Overload capability @ pulse of 100ms		±1000A
Supply voltage		±15V(±5%)
Supply current		≤80mA+IS
Rated operational voltage RMS（IEC61010-1）	Basic insulation	2000V
	Reinforced insulation	600V
Max measurement aperture		26mm
Second interface		D-Sub-9Pin
Fastening screws and tighening torque		M4 steel screw *4；2.8Nm M5 steel screw *2；3.7Nm