Power Supplies for All Applications - rapid-tech https://rapid-tech.com.au/acdc-power-supplies/ Test Equipment Supplier Mon, 23 Sep 2024 03:58:39 +0000 en-AU hourly 1 https://wordpress.org/?v=6.9.7 https://rapid-tech.com.au/wp-content/uploads/2023/11/cropped-Rapid-Tech-logo-blue-1-1-32x32.png Power Supplies for All Applications - rapid-tech https://rapid-tech.com.au/acdc-power-supplies/ 32 32 High-Power GW Instek AEL-5000 AC/DC Load Series – Precision Testing for UPS, Inverter/Breaker, AC Power Source Applications with Turbo Mode & Over-Protection Features https://rapid-tech.com.au/high-power-gw-instek-ael-5000-ac-dc-load-series-precision-testing-for-ups-inverter-breaker-ac-power-source-applications-with-turbo-mode-over-protection-features/ Mon, 18 Dec 2023 00:29:26 +0000 https://rapid-tech.com.au/?post_type=product&p=27249 GwInstek_logo_index

Authorised Australian Distributor

Introducing the GW Instek AEL-5000 AC/DC Load Series, the perfect companion for testing applications demanding high power and large current. Experience the power of up to 22500W with a single unit and take advantage of the Turbo Mode, capable of doubling the electronic load power within a second. Not only does the AEL-5000 series offer unprecedented capabilities, but it also ensures optimal safety with over-voltage, over-current, over-power, and over-temperature protections. Optimised for UPS, Inverter/Breaker, AC Power Source and other applications, the AEL-5000 series is equipped with state-of-the-art precision measurement circuits ensuring accurate readings. Upgrade your testing environment today with the GW Instek AEL-5000 AC/DC Load Series.

PDF Download  GW Instek AEL-5000 User Manual 

PDF Download GW Instek AEL-5000 Brochure

The post High-Power GW Instek AEL-5000 AC/DC Load Series – Precision Testing for UPS, Inverter/Breaker, AC Power Source Applications with Turbo Mode & Over-Protection Features appeared first on rapid-tech.

]]> Empower Your Testing with GW InstEK AEL-5000 AC/DC Load

Experience the unrivalled performance and versatility of the GW Instek AEL-5000 AC/DC Load. Our cutting-edge series includes 20 unique models tailored to a diverse power range, offering the perfect testing solution for UPS, Inverter/Breaker, AC Power Source, Battery, Fuse/Breaker, DC Power Source and other applications.

Unprecedented Power Capabilities

With the power range of a single unit stretching from 1875W to 22500W, the AEL-5000 AC/DC Load series truly surpasses the competition. Connect up to 8 units in parallel to reach an astonishing single-phase parallel connection power of 180kW. For three-phase power, you can achieve a staggering 540kW.

Cutting-Edge Precision Measurements

The AEL-5000 series is equipped with state-of-the-art precision measurement circuits like 16-bit A/D and DSP, providing accurate and efficient readings for Voltage RMS, Current RMS, Watt value, Volt-Ampere, Crest Factor, Power Factor, Total Harmonic Distortion (THD), and many other essential measurements.

Innovative Turbo Mode

Take your testing to new heights with the series’ Turbo Mode feature, doubling the current and power of the electronic load within a second. This mode is ideal for testing applications that demand transient high power and large current, offering the most cost-effective solution.

Convenient Load On Start Function

Unleash the convenience of the Load On Start function with the AEL-5000 series. Verify the stability of your inverter or uninterruptible power supply (UPS) during startup while directly loading the set load current.

Ensured Protection

The AEL-5000 series also delivers excellent protections against over-voltage, over-current, over-power, and over-temperature, ensuring a safe and reliable testing environment.

User-friendly Interface Options

Choose from a range of optional control interfaces, including GPIB, RS-232, USB, and LAN, to seamlessly integrate the AEL-5000 series into your testing system.

Upgrade to the GW Instek AEL-5000 AC/DC Load Series today and elevate your testing capabilities like never before.

Features

  • CC, Linear CC, CR, CV, CP and AC Rectifier Load Mode
  • Frequency Range : DC, 40~440Hz
  • Turbo Mode for 2 Times the Current and Power of Electronic Load within 1 Second
  • Three Units Parallel up to 90kW and Three-phase △ or Y Load Connection Can be Synchronized Control by One Master Unit
  • Loading and Unloading Angle Control; 0~359 Degree is Settable
  • Positive Half-cycle or Negative Half-cycle Loading
  • Supports SCR/TRIAC Current Phase Modulation Waveforms,90 Degree Trailing Edge and Leading Edge
  • Optional Interface : GPIB、RS232、USB、LAN

The post High-Power GW Instek AEL-5000 AC/DC Load Series – Precision Testing for UPS, Inverter/Breaker, AC Power Source Applications with Turbo Mode & Over-Protection Features appeared first on rapid-tech.

]]> GW Instek ASR-3000 Series Programmable AC/DC Power Source – Versatile, Efficient and Fast Adjustment Time, ideal for AC Motors, LED Modules, and Server Powers https://rapid-tech.com.au/gw-instek-asr-3000-series-programmable-ac-dc-power-source-versatile-efficient-and-fast-adjustment-time-ideal-for-ac-motors-led-modules-and-server-powers/ Sun, 17 Dec 2023 22:16:59 +0000 https://rapid-tech.com.au/?post_type=product&p=27243 GwInstek_logo_index

Authorised Australian Distributor

Introducing the GW Instek ASR-3000 Series, your high-efficiency programmable AC/DC Power Source with a rapid DC voltage change time of less than 100us. Suitable for diverse applications ranging from On-board Chargers and AC Motors to LED modules and Server Powers, this series is an ideal fit for your individual power requirements. With four distinct models including ASR-3200, ASR-3300, ASR-3400, and ASR-3400HF, the ASR-3000 Series offers a broad range of output ratings, up to AC 0 – 400 Vrms and DC 0 - ± 570 V. It also features an impressive frequency output of up to 999.9 Hz, enhancing to 5000Hz in the ASR-3400HF model. Benefit from ten innovative output modes, a built-in web server, memory function, and external control I/O options. Trust the GW Instek ASR-3000 Series for a power source that is not just efficient and reliable, but truly exceptional.

PDF Download   GW Instek ASR-3000 Series Datasheet

PDF Download GW Instek ASR-3000 Series Assembly Manual

The post GW Instek ASR-3000 Series Programmable AC/DC Power Source – Versatile, Efficient and Fast Adjustment Time, ideal for AC Motors, LED Modules, and Server Powers appeared first on rapid-tech.

]]> Introducing the versatile, robust GW Instek ASR-3000 Series. As a programmable AC/DC Power Source, this series is unparalleled in its high-speed DC voltage rising and falling time (≦100us). The ASR-3000 series manifests the epitome of power efficiency and precision. The series radiates a diverse range of output rating from AC 0 – 400 Vrms to DC 0 – ± 570 V, ensuring your specific needs are met with accuracy and reliability. Not to mention, these products support a frequency output up to 999.9 Hz, with the ASR-3400HF model scaling up to 5000Hz.

Embodying versatility, there are four different models under the ASR-3000 series: ASR-3200(2kVA), ASR-3300(3kVA), ASR-3400(4kVA), and ASR-3400HF(4kVA, Frequency up to 5kHz). Each model can serve your distinct power requirements, whether you’re developing On-board Chargers, Server Powers, LED modules, AC Motors, AC Fans, UPS, or dabbling with automotive electrical equipment and home appliances.

In the ASR-3000 series, ten innovative output modes are available, ranging from AC power output mode (AC-INT Mode), DC power output mode (DC-INT Mode), to External DC voltage control of AC output mode (AC-VCA). These modes offer the flexibility to tailor your power source to your specific needs.

Equipped with high-end features such as a built-in web server, memory function, and external control I/O, this series proffers advanced, cutting-edge technology in your hands. The ASR-3000 series ensures your power generation is seamless, efficient, and reliable. Choose GW Instek ASR-3000 Series for a power source that not only meets your needs but exceeds your expectations.

Features

  • Output Rating: AC 0 – 400 Vrms, DC 0 – ± 570 V
  • Output Frequency up to 999.9 Hz (ASR-3400HF up to 5000Hz)
  • DC Output (100% of Rated Power)
  • Measurement Items: Vrms, Vavg, Vpeak, Irms, IpkH, Iavg, Ipeak, P, S, Q, PF, CF
  • Voltage and Current Harmonic Analysis(THDv, THDi)
  • Remote Sensing Capability
  • OCP, OPP, OTP, AC Fail Detection and Fan Fail Alarm
  • Support Arbitrary Waveform Function
  • Output Capacity: 2kVA/ 3kVA/4kVA
  • Customized Phase Angle for Output On/Off
  • Sequence and Simulation Function(up to 10 sets)
  • Interface(std): USB, LAN, RS-232, GPIB
  • Built-in External Control I/O and External Signal Input
  • Built-in Output Relay Control
  • Memory Function (up to 10 sets)
  • Built-in Web Server

There are four models of the series:
1. ASR-3200(2kVA)
2. ASR-3300(3kVA)
3. ASR-3400(4kVA)
4. ASR-3400HF(4kVA, Frequency upto 5kHz)

The series can provide rated power output during AC output and DC output. Ten ASR-3000 output modes are available.

  • AC power output mode (AC-INT Mode)
  • DC power output mode (DC-INT Mode)
  • AC/DC power output mode (AC+DC-INT Mode)
  • External AC signal source mode (AC-EXT Mode)
  • External AC/DC signal source mode (AC+DC-EXT Mode)
  • External AC signal superimposition mode (AC-ADD Mode)
  • External AC/DC signal superimposition mode (AC+DC-ADD Mode)
  • External AC signal synchronization mode (AC-SYNC Mode)
  • External AC/DC signal synchronization mode (AC+DC-SYNC Mode)
  • External DC voltage control of AC output mode (AC-VCA)

The post GW Instek ASR-3000 Series Programmable AC/DC Power Source – Versatile, Efficient and Fast Adjustment Time, ideal for AC Motors, LED Modules, and Server Powers appeared first on rapid-tech.

]]> GW INSTEK ASR-2000 Series Programmable AC/DC Power Source https://rapid-tech.com.au/gw-instek-asr-2000-series-programmable-ac-dc-power-source/ Wed, 21 Oct 2020 07:46:11 +0000 https://rapid-tech.com.au/?post_type=product&p=16831

ASR-2000 Series Features

  • Output Rating: AC 0 – 350 Vrms, DC 0 - ± 500 V
  • Output Frequency up to 999.9 Hz
  • DC Output (100% of Rated Power)
  • Measurement Items: Vrms, Vavg, Vpeak, Irms, IpkH, Iavg, Ipeak, P, S, Q, PF, CF
  • Voltage and Current Harmonic Analysis(THDv, THDi)
  • Remote Sensing Capability
  • OVP, OCP, OPP, OTP, AC Fail Detection and Fan Fail Alarm.
  • Support Arbitrary Waveform Function
  • Output Capacity: 500VA/ 1000VA
  • Customized Phase Angle for Output On/Off
  • Sequence and Simulation Function(up to 10 sets)
  • Interface: USB, LAN(std.); RS-232+GPIB(opt.)
  • Built-in External Control I/O and External Signal Input
  • Built-in Output Relay Control
  • Memory Function (up to 10 sets)
  • Built-in Web Server

 

The post GW INSTEK ASR-2000 Series Programmable AC/DC Power Source appeared first on rapid-tech.

]]> The GWINSTEK ASR-2000 series, is a AC+DC power source aiming for system integration or desktop applications, provides both rated power output for AC output and rated power output for DC output.

Nine ASR-2000 output modes are available, including
1) AC power output mode (AC-INT Mode),
2) DC power output mode (DC-INT Mode),
3) AC/DC power output mode (AC+DC-INT Mode),
4) External AC signal source mode (AC-EXT Mode),
5) External AC/DC signal source mode (AC+DC-EXT Mode),
6) External AC signal superposition mode (AC-ADD Mode),
7) External AC/DC signal superposition mode (AC+DC-ADD Mode),
8) External AC signal synchronization mode (AC-SYNC Mode),
9) External AC/DC signal synchronization mode (AC+DC-SYNC Mode).

The GW INSTEK ASR-2000 series provides users with waveform output capabilities to meet the test requirements of different electronic component development, automotive electrical devices and home appliance, including 1) Sequence mode generates waveform fallings, surges, sags, changes and other abnormal power line conditions; 2) Arbitrary waveform function allows users to store/upload user-defined waveforms; and 3) Simulate mode simulates power outage, voltage rise, voltage fall, and frequency variations.

When the ASR-2000 series power source outputs, it can also measure Vrms, Vavg, Vpeak, Irms, Iavg, Ipeak, IpkH, P, S, Q, PF, CF, 40th-order Voltage Harmonic and Current Harmonic. In addition, the Remote sense function ensures accurate voltage output. The Customized Phase Angle for Output On/Off function can set the starting angle and ending angle of the voltage output according to the test requirements. V-Limit, Ipeak-Limit, F-Limit, OVP, OCP, OPP function settings can protect the DUT during the measurement process. In addition to OTP, OCP, and OPP protection, the ASR-2000 series also incorporates the Fan fail alarm function and AC fail alarm function.

GW INSTEK ASR-2000 Specifications

The specifications apply when the ASR-2000 is powered on for at least 30 minutes under +20°C~+30°C.
Input Ratings (AC rms)
Model ASR-2050/ASR-2050R ASR-2100/ASR-2100R
Norminal input voltage 100 Vac to 240 Vac
Input voltage range 90 Vac to 264 Vac
Phase Single phase, Two-wire
Input frequency range 47 Hz to 63 Hz
Max. power consumption 800 VA or less 1500 VA or less
Power factor*1 100Vac 0.95 (typ.)
200Vac 0.90 (typ.)
Max. input current 100Vac 8 A 15 A
200Vac 4 A 7.5 A
*1. For an output voltage of 100 V/200 V (100V / 200V range), maximum current, and a load power factor of 1.
AC Mode Output Ratings (AC rms)
Model ASR-2050/ASR-2050R ASR-2100/ASR-2100R
Voltage Setting Range*1 0.0 V to 175.0 V / 0.0 V to 350.0 V
Setting Resolution 0.1 V
Accuracy*2 ±(0.5 % of set + 0.6 V / 1.2 V)
Output phase Single phase, Two-wire
Maximum current*3 100 V 5 A 10 A
200 V 2.5 A 5 A
Maximum peak current*4 100 V 20 A 40 A
200 V 10 A 20 A
Power capacity 500 VA 1000 VA
Frequency Setting range AC Mode: 40.00 Hz to 999.9 Hz, AC+DC Mode: 1.00 Hz to 999.9 Hz
Setting resolution 0.01 Hz (1.00 to 99.99 Hz), 0.1 Hz (100.0 to 999.9 Hz)
Accuracy For 45 Hz to 65 Hz: 0.01% of set
For 40 Hz to 999.9 Hz: 0.02% of set
Stability*5 ± 0.005%
Output on phase 0.0° to 359.9° variable (setting resolution 0.1°)
DC offset*6 Within ± 20 mV (TYP)
*1. 100 V / 200 V range
*2. For an output voltage of 17.5 V to 175 V / 35 V to 350 V, sine wave, an output frequency of 45 Hz to 65 Hz, no load, DC voltage setting 0V (AC+DC mode) and 23°C ± 5°C
*3. For an output voltage of 1 V to 100 V / 2 V to 200 V.
Limited by the power capacity when the output voltage is 100 V to 175 V / 200 V to 350 V.
*4. With respect to the capacitor-input rectifying load. Limited by the maximum current.
*5. For 45 Hz to 65 Hz, the rated output voltage, no load and the resistance load for the maximum current, and the operating temperature.
*6. In the case of the AC mode and output voltage setting to 0 V.
Output Rating for DC Mode
Model ASR-2050/ASR-2050R ASR-2100/ASR-2100R
Voltage Setting Range*1 -250 V to +250 V / -500 V to +500 V
Setting Resolution 0.1 V
Accuracy*2 ±(|0.5 % of set| + 0.6 V / 1.2 V)
Maximum current*3 100 V 5 A 10 A
200 V 2.5 A 5 A
Maximum peak current*4 100 V 20 A 40 A
200 V 10 A 20 A
Power capacity 500 W 1000 W
*1. 100 V / 200 V range
*2. For an output voltage of -250 V to -25 V, +25 V to +250 V / -500 V to -50 V, +50 V to +500 V, no load, AC volatge setting 0V (AC+DC mode) and 23℃
± 5℃
*3. For an output voltage of 1.4 V to 100 V / 2.8 V to 200 V.
Limited by the power capacity when the output voltage is 100 V to 250 V / 200 V to 500 V.
*4. Within 5 ms, Limited by the maximum current.
Output Voltage Stability
Model ASR-2050/ASR-2050R ASR-2100/ASR-2100R
Line regulation*1 ±0.2% or less
Load regulation*2 0.15% @45 – 65Hz
0.5% @DC, all other frequencies (0 to 100%, via output terminal)
Ripple noise*3 0.7 Vrms / 1.4 Vrms (TYP)
*1. Power source input voltage is 100 V, 120 V, or 230 V, no load, rated output.
*2. For an output voltage of 75 V to 175 V / 150 V to 350 V, a load power factor of 1, stepwise change from an output current of 0 A to maximum current (or its reverse), using the output terminal on the rear panel.
*3. For 5 Hz to 1 MHz components in DC mode using the output terminal on the rear panel.
Output Voltage Waveform Distortion Ratio, Output Voltage Response Time, Efficiency
Model ASR-2050/ASR-2050R ASR-2100/ASR-2100R
Output voltage waveform distortion ratio*1 0.5 % or less
Output voltage response time*2 100 us (TYP)
Efficiency*3 70 % or more
*1. At an output voltage of 50 V to 175 V / 100 V to 350 V, a load power factor of 1, and in AC and AC+DC mode.
*2. For an output voltage of 100 V / 200 V, a load power factor of 1, with respect to stepwise change from an output current of 0 A to the maximum current (or its reverse). 10% ~ 90% of output voltage
*3. For AC mode, at an output voltage of 100 V / 200 V, maximum current, and load power factor of 1 and sine wave only.
Measured Value Display
All accuracy of the measurement function is indicated for 23 °C±5 °C.
Model ASR-2050/ASR-2050R ASR-2100/ASR-2100R
Voltage RMS, AVG
value*1		 Resolution 0.1 V
Accuracy*2 For 45 Hz to 65 Hz and DC: ±(0.5 % of reading + 0.3 V / 0.6 V) For 40 Hz to 999.9 Hz: ±(0.7 % of reading + 0.9 V / 1.8 V)

The post GW INSTEK ASR-2000 Series Programmable AC/DC Power Source appeared first on rapid-tech.

]]> GW INSTEK APS-7050E / APS-7100E AC Power Sources https://rapid-tech.com.au/gw-instek-aps-7000e-ac-power-sources/ Wed, 21 Oct 2020 06:20:38 +0000 https://rapid-tech.com.au/?post_type=product&p=16829

GW INSTEK APS-7000E Features

  • 4.3 inch TFT-LCD Display
  • Output Capacity: APS-7050E(500VA, 310Vrms, 4.2/ 2.1Arms), APS-7100E(1000VA, 310Vrms, 8.4/ 4.2Arms)
  • Only 88mm(2U) case height
  • Measurement function comprises Voltage, Current, Power, Current(peak), Frequency, Power Factor
  • 10 sets of the Test mode simulate power transient output
  • 10 sets of Preset allow users to store ten settings

The post GW INSTEK APS-7050E / APS-7100E AC Power Sources appeared first on rapid-tech.

]]> GW INSTEK APS-7050E / APS-7100E AC Power Sources

GW Instek has launched the APS-7000E Series economy version of the APS-7000 Series programmable AC power source. With the height of 2U, the maximum rated output for APS-7050E is 500VA, 310Vrms, 4.2Arms and APS-7100E is 1000VA, 310Vrms, 8.4Arms.

The output frequency range of the series is 45~500Hz. The series is ideal for the test and development of DC power supply devices, consumer electronics, automotive electronics and electronic components.

The APS-7000E Series comprises six measurement and test functions (Vrms, Irms, F, Ipk, W, PF), and provides user interface similar to that of AC Power Meter. The APS7000E Series, via switching many sets of current levels to increase small current measurement resolution, is ideal for the LED industry and standby mode power consumption test. Ten sets of Preset allow users to store ten settings.

To meet the test criteria of line voltage fluctuation often seen in consumer electronics, the APS-7000E Series not only provides a stable AC power source but also features the Test mode to satisfy special or abnormal voltage and frequency variation demands.

Ten sets of the Test mode simulate power outage, voltage rise, and voltage fall. The APS7000E Series that simulates waveforms of city power grid s transient changes is suitable for verifying electronics products operated under abnormal power source.

The APS-7000E Series is the economy version of the APS-7000 Series. If communications interface and larger voltage/frequency are required, please refer to the APS-7000 Series.

APS-7000E Specifications

The specifications apply when the APS-7000E is powered on for at least 30 minutes under +20°C~+30°C.
Model APS-7050E APS-7100E
Maximum Output Capacity
Power Rating 500VA 1kVA
Output Voltage Setting
Range 0~155Vrms, 0~310Vrms, Auto
Output Maximum Current
Range 4.2A/2.1A 8.4A/4.2A
Output Maximum Peak Current
Range 16.8A/8.4A 33.6A/16.8A
Output Frequency Setting
Range 45.0~500Hz 45.0~500Hz
Resolution 0.01Hz(45.0~99.99Hz)
0.1Hz(100.0~500.0Hz)		 0.01Hz(45.0~99.99Hz)
0.1Hz(100.0~500.0Hz)
Setting Accuracy ±(0.02% of setting)
Waveform
Total harmonic distortion ≦0.5% at 45~500Hz (Resistive load)
Voltage Regulation
Line Regulation 0.1% of full scale
Load Regulation 0.5% of full scale
Measurement
Frequency Range 45~ 500Hz
Resolution 0.01Hz (45.0~99.99Hz)
0.1Hz (100.0~500.0Hz)
Accuracy ±0.1Hz
Voltage (r.m.s) Range 0.2~38.75 Vrms
38.76~77.5 Vrms
77.51~155.0 Vrms
155.1~310.0 Vrms
Resolution 0.01V at 0.00~99.99 Vrms
0.1V at 100.0~310.0 Vrms
Accuracy ±(0.5% of reading+ 2counts)
Current (r.m.s) Range 2.00~70.00mA
60.0~350.0mA
0.300~3.500A
3.00~17.50A
Resolution 0.01mA
0.1mA
0.001A
0.01A
Accuracy ±(0.6% of reading+5 counts), 2.00~350.0mA
±(0.5% of reading+5 counts), 0.350~3.5A
±(0.5% of reading+3 counts), 3.500~17.5A
Power (W) Resolution 0.01W
0.1W
1W
Accuracy ±(0.6% of reading+5 counts), 0.2~99.99W
±(0.6% of reading+5 counts), 100.0~999.9W
±(0.6% of reading+2 counts), 1000~9999W
Power Factor Resolution 0.001
Accuracy ±(2% reading+ 2 counts)
Memory
Memory 10 (0~9 numeric keys)
Others
AC Input 115/230 Vac ± 15%
Phase Single Phase, Two wire (1P2W)
Protection OCP, OPP, OHP and Alarm
Dimension (W*H*D) &
Weight		 430 x 88 x 400, 24Kg 430 x 88 x 560, 38Kg

The post GW INSTEK APS-7050E / APS-7100E AC Power Sources appeared first on rapid-tech.

]]> GW Instek PPH-1503 Programmable High Precision Linear DC Power Supply https://rapid-tech.com.au/gw-instek-pph-1503-programmable-high-precision-linear-dc-power-supply/ Wed, 11 Oct 2017 12:51:51 +0000 http://rapid-tech.com.au/?post_type=product&p=5651 GwInstek_logo_index

The GW Instek PPH1503 is a high-speed and high-precision DC Power Supply with dual range of 15V/3A or 9V/5A. The PPh-1503 is exclusively designed to meet low power consumption requirements and users' demands of accuracy, speed and resolution of both voltage and current.

Circuits are designed with swift response capability to provide a stable voltage output while experiencing load changes. For example, when switching cellular phone from standby to talk mode, the current consumption will be dramatically changed within milliseconds. When load current exceeded current limit, two operational modes: Limit and Trip can be selected. Under limit mode, PPH-1503 will automatically switch to constant current (CC) mode. Under Trip mode, voltage output will automatically turn off.

Authorised Australian Distributor

pdf_sml    PPH-1503 Datasheet

pdf_sml    PPH-1503 Brochure

pdf_sml    PPH-1503 User Manual

 

 

The post GW Instek PPH-1503 Programmable High Precision Linear DC Power Supply appeared first on rapid-tech.

]]> The GW Instek PPH-1503 Programmable High Precision Linear DC Power Supply is designed to provide fast response to the current change for recovering the output voltage at a minimum variation. The high sampling rate allows fast feedback in voltage and current measurement to expedite products’ testing speed, which is able to increase the test throughout production. Sink function can be used to test the battery charger of portable devices. The high precision performance of PPH-1503 provides the measurement capability in low power consumption level. One built-in DVM (Digital Volt-Meter) with input ports is designed to measure any point on Device Under Test (DUT)while PPH1503 is outputting voltage and current. Besides, two ports are located on the front and rear panel which users can only select one to perform tests based upon their connection convenience. The GW Instek PPH-1503 is and ideal power source for production lines, R&D laboratories, device inspection, maintenance centers or facilities with the requirements of a swift and precise power supply with DVM.

GW Instek PPH-1503 Features:

  • Dual Range Output (0-15V/0-3A) or (0-9V/0-5A) 45 W
  • 3.5 Inch TFT LCD Display
  • Constant Voltage and Constant Current Operation
  • Built-in DVM Measurement Function
  • High Measurement REsolution (1mV/0.1mA for 5A Range);(1mV/0.1uA for 5mA Range)
  • External Relay Control Output On/Off
  • Sink Current Capability (Maximum:2A)
  • Digital Panel Control
  • Selectable Output and Input (DVM) Ports From Front or Rear Panel
  • Key Lock Function
  • 5 Sets of Preset Memory Including Power Output ON/OFF States
  • High Speed Transient Recovery Time(<40us within 100mV ; <80us within 20mV)
  • OVP/OCP/OTP Protection to Prevent DUT Damage
  • Standard Multiple Interfaces: USB / LAN /GPIB
  • Labview Driver and PC Remote Control Software
DC GENERAL MEASUREMENT TIME CHOICES 0.01 ~ 10PLC1,0.01PLC/step
AVERAGE READINGS 1~10
TYPICAL READING TIME2,3 31ms
DC VOLTAGE OUTPUT
(23℃±5℃)		 OUTPUT VOLTAGE 0~15V
OUTPUT ACCURACY ± (0.05%+10mV)
PROGRAMMING RESOLUTION 2.5mV
READBACK ACCURACY3 ± (0.05%+3mV)
READBACK RESOLUTION 1mV
OUTPUT VOLTAGE RISING TIME 0.15ms (10% ~ 90%)
OUTPUT VOLTAGE FALLING TIME 0.65ms (90% ~ 10%)
LOAD REGULATION 0.01%+2mV
LINE REGULATION 0.5mV
STABILITY4 0.01%+0.5mV
RECOVERY TIME(1000%LOAD CHANGE) <40us (<100mV)
<80us (<20mV)
RIPPLE AND NOISE5 1mV rms(0~1MHz)
8mVpp(20Hz~ 20MHz)
DC CURRENT
(23℃±5℃)		 OUTPUT CURRENT 0 ~ 5A (0 ~ 9V)
0 ~ 3A (9 ~ 15V)
SOURCE COMPLIANCE ACCURACY ±(0.16%+5mA)
PROGRAMMED SOURCE RESOLUTION 1.25mA
READBACK ACCURACY3 5A range: ±(0.2%+400uA)
5mA range: ±(0.2%+1uA)
 READBACK RESOLUTION 5A range: 100uA
5mA range: 0.1uA
CURRENT SINK CAPACITY 0 ~ 5V: 2A
5 ~ 15V:(2A derate 0.1A)/V
LOAD REGULATION 0.01%+1mA
LINE REGULATION 0.5mA
STABILITY4 0.01%+50uA
DVM INPUT VOLTAGE RANGE 0 ~ 20VDC
INPUT IMPEDANCE 10Ω
MAXIMUM INPUT VOLTAGE -3V, +22V
READING ACCURACY3 ± (0.05%+3mV)
READING RESOLUTION 1mV
PULSE CURRENT MEASUREMENT TRIGGER LEVEL 5mA ~ 5A, 5mA/step
HIGH TIME/LOW TIME/AVERAGE TIME 33.3us to 833ms, 33.3us/step
TRIGGER DELAY 0 ~ 100ms,10us/steps
AVERAGE READINGS 1 ~ 100
LONG INTEGRATION PULSE TIMEOUT 1S ~ 63S
LONG INTEGRATION MEASUREMENT TIME 850ms(60Hz)/840ms(50Hz) ~ 60s,or AUTO time 16.7ms/steps(60Hz), 20ms/steps(50Hz)
LONG INTEGRATION TRIGGER MODE Rising, Falling, Neither
OVP OVP RANGE OFF,ON (0 ~ 15.2V)
RESOLUTION 10mV
ACCURACY 50mV
Others PROGRAMMING IEEE-488.2(SCPI)
USER_DEFINABLE POWER_UP STATES 5 sets
REAR PANEL CONNECTOR 8Pin:output*4, sense*2, DVM*2
TEMPERATURE COEFFICIENT 0.1* specification/ ˚C
POWER CONSUMPTION 150VA
REMOTE/LOCATION CONNECTOR USB/GPIB/LAN
RELAY CONTROL CONNECTOR 150mA/15V  5Voutput, 100mA
Insulation Chassis and Terminal 20MΩ or above (DC 500V)
Chassis and AC cord 30MΩ or above (DC 500V)
Operation Environment Indoor use, Altitude: ≤ 2000m
Ambient temperature: 0 ~ 40°C
Relative humidity: ≤ 80%Installation category: II, Pollution degree: 2
STORAGE Environment TEMPERATURE: -20˚C  ~ 70˚C
HUMIDITY: < 80%
INPUT POWER 90-264VAC, 50/60Hz 6
Accessories CD 8cmUser manual x1, Quick Start manual x1
Test lead GTL-117 x 1, GTL-203A x 1, GTL-204A x 1
Dimensions 222 (W) x 86 (H) x 363 (D) mm
Weight Approx. 4.2kg
 Remarks
  1. PLC=PowerLineCycle, 1PLC = 16.7ms for 60Hz operation, 20ms for 50Hz operation;
  2. Display OFF, Speed includes measirement and binary data transfer out of GPIB;
  3. PLC=1;
  4. STABILITY:Following 15 minute warm-up, the change in output over 8 hours under ambient temperature, constant load, and line operating conditions;
  5. The ground ring of the probe is pressed directly against the output ground of the power supply and the tip is in contact with the output voltage pin.
  6. Auto detected at power-up;

The post GW Instek PPH-1503 Programmable High Precision Linear DC Power Supply appeared first on rapid-tech.

]]> GW Instek GPE-X323 series High Resolution Power Supplies https://rapid-tech.com.au/gw-instek-gpe-x323-series-high-resolution-power-supplies/ Wed, 26 Jul 2017 01:17:53 +0000 http://rapid-tech.com.au/?post_type=product&p=5310 GwInstek_logo_index

The GW Instek GPE-X323 series is a high resolution power supply designed for the global market. The GPE-X323 series features output power from 192 to 217 watts, three independent isolated output channels (GPE-X323), high resolution, low noise, high reliability, key lock function, and compact size.

Authorised Australia Distributor

pdf_sml    GW Instek GPE-X323 Datasheet
pdf_sml    GW Instek GPE-X323 User Manual

 

The post GW Instek GPE-X323 series High Resolution Power Supplies appeared first on rapid-tech.

]]> The GW Instek GPE-X323 series has a built-in digital panel control design to replace conventional control method. This unique design allows the GPE-X323 series linear DC power supply to provide users with more efficient functionalities, including set view and key lock so as to expedite the operation process. The key lock function protects DUTs by preventing others from changing voltage / current parameters. Additionally, output key light facilitates users in clearly reading the operational status of power supply.

GPE_01

Tracking Series / Parallel Operational
In addition to independent output channels, the GW Instek GPE-X323 series provides automatic tracking series and parallel connection function. The series and parallel connections allow power supplies to output 32V/6A (Parallel connection) and 64V/3A (Series connection). The CH1 and CH2 of GPE-2323 / GPE-3323 / GPE-4323 models operate the series and parallel connection function.

GPE_02

Remote Control (Remote I/O) for Output On / Off Function
The GW Instek GPE-X323 series provides the Output On/Off function to prevent DUTs from unnecessary damages caused by the pre-output when connecting a DUT with a power supply. Users must preset voltage and current parameters and ensure that all connections are correct. Then, via manual control on the front panel, users can activate the Output On/Off.

GPE_04

 

The post GW Instek GPE-X323 series High Resolution Power Supplies appeared first on rapid-tech.

]]> GW Instel GPR-M Series Single Output, 180W, Linear DC Power Supplies https://rapid-tech.com.au/gw-instel-gpr-m-series-single-output-180w-linear-dc-power-supplies/ Tue, 18 Jul 2017 02:22:05 +0000 http://rapid-tech.com.au/?post_type=product&p=5291 GwInstek_logo_index

The GW Instek GPR-M Series are single output, 180W, linear DC power supplies, featuring all the same functions as the GPR-H Series but for lower power demands. Like the GPR-H Series, the GPR-M Series are suitable for high-end precision bench top applications. Low load and line regulation for both constant voltage and constant current mode ensure reliable, predictable output. Overload and reverse polarity protection as well as internal selection for dynamic or constant load are standard.

Authorised Australian Distributor

pdf_sml    GW Instek GPR-M Series User Manual

 

The post GW Instel GPR-M Series Single Output, 180W, Linear DC Power Supplies appeared first on rapid-tech.

]]>

Key Features of the GW Instel GPR-M Series DC Power Supplies

  • 0.01% High Regulation
  • Constant Voltage and Constant Current Operation
  • Internal Select for Continuous or Dynamic Load
  • Low Ripple and Noise
  • Overload and Reverse Polarity Protection
  • 3 1/2 Digit 0.5″ LED Display

GW Instel GPR-M Series Specifications:

DC OUTPUT
Output Volts (V)
Output Amps (A)
GPR-1810HD
0 ~ 18
0 ~ 10
GPR-3060D
0 ~ 30
0 ~ 6
GPR-6030D
0 ~ 60
0 ~ 3
CONSTANT VOLTAGE OPERATION
Regulation Line regulation < 0.01% + 3mV
Load regulation <0.01% + 5mV (<10A)
Load regulation < 0.02% + 5mV (>10A)
Ripple & Noise < 1mVrms (5Hz ~ 1MHz)
Recovery Time < 100μS ( 50% load change, minimum load 0.5A )
Output range 0 to rating voltage continuously adjustable
CONSTANT CURRENT OPERATION
Regulation Line regulation < 0.2% + 3mA
Load regulation <0.2% + 3mA
Ripple Current < 3mArms
Output Range 0 to rating current continuously adjustable
METER
Type 3 1/2 Digits 0.5″ LED Display
Accuracy ±( 0.5% of rdg + 2 digits )
INSULATION
Chassis and Terminal 20MΩ or above (DC 500V)
Chassis and AC Cord 30MΩ or above (DC 500V)
POWER SOURCE
AC 100V/120V/220V/240V±10%, 50/60Hz
ACCESSORIES
User manual x 1
Power cord x 1
Test Lead GTL-104 x 1
DIMENSIONS & WEIGHT
255(W) x 145(H) x 335(D)mm
Approx. 11.5kg

Standard Accessories

  • User Manual X 1
  • Power Cord X 1
  • Test lead GTL-105A x 1 ( GPR-6030D )
  • GTL-104A x 1 ( GPR-1810HD/3060D )
SELECTION GUIDE
Output Watts (W)
Output Volts (V)
Output Amps (A)
Weight (kg)
GPR-1810HD
180W
0 ~ 18
0 ~ 10
11.5
GPR-3060D
180W
0 ~ 30
0 ~ 6
11.5
GPR-6030D
180W
0 ~ 60
0 ~ 3
11.5

 

The post GW Instel GPR-M Series Single Output, 180W, Linear DC Power Supplies appeared first on rapid-tech.

]]> GW Instek PSW-Series Programmable Switching DC Power Supply https://rapid-tech.com.au/gw-instek-psw-series-programmable-switching-dc-power-supply/ https://rapid-tech.com.au/gw-instek-psw-series-programmable-switching-dc-power-supply/#respond Mon, 15 Feb 2016 01:11:32 +0000 http://sitebuilds.net/rapidtech/product/gw-instek-psw-series-programmable-switching-dc-power-supply/ GwInstek_logo_index

The PSW-Series is a single-output multi-range programmable switching DC power Supply covering a power range up to 1080 watts. This series of products include fifteen models with the combination of 30V, 80V, 160V, 250V, and 800V rated voltages and 360W, 750W and 1080W maximum output powers. The multi-range feature allows the flexible and efficient configuration of voltage and current within the rated power range.

As the PSW-Series can be connected in series (maximum of two units) or in parallel (maximum of three units), the capability of connecting multiple PSW units for higher voltage or higher current output provides a broad coverage of applications. With the flexibility of multi-range power utilization and series/parallel connection, the PSW Series significantly reduces the user's investment for various power supply products to accommodate the projects with different power requirements.

GW Instek PSW-Series Features:

  • Voltage Rating: 30V, 80V, 160V, 250V, 800V.
  • Output Power Ratings: 360W, 720W, and 1080W.
  • Constant Power Output for Multiple Range operation.
  • CV / CC Priority; Particularly suitable for the battery and LED industry.
  • Adjustable Slew rate.
  • Series Operation: Up to 2 units (30V, 80V, and 160V models only).
  • Parallel Operation: up to 3 units.
  • High efficiency and high power density.
  • 1/2, 1/3, and 1/6 Rack Mount size design (EIA / JIS Standard) for 360W, 720W and 1080W models.
  • Standard Interface: LAN, USB, Analog control interface.
  • Optional Interface: GPIB-USB adaptor.
  • LabView Driver.

The post GW Instek PSW-Series Programmable Switching DC Power Supply appeared first on rapid-tech.

]]>  

PSW-Series – 360 Watt Models
Models PSW-30-36 PSW-80-13.5 PSW-160-7.2 PSW-250-4.5 PSW-800-1.44
Output Voltage 30V 80V 160V 250V

800V
Output Current 36A 13.5A 7.2A 4.5A 1.44A
Output Power 360W 360W 360W 360W 360W
PSW-Series – 720 Watt Models
Models PSW-30-72 PSW-80-27 PSW-160-14.4 PSW-250-9 PSW-800-2.88
Output Voltage 30V 80V 160V 250V 800V
Output Current 72A 27A 14.4A 9A 2.88A
Output Power 720W 720W 720W 720W 720W
PSW-Series – 1080 Watt Models
Models PSW-30-108 PSW-80-40.5 PSW-160-21.6 PSW-250-13.5 PSW-800-4.32
Output Voltage 30V 80V 160V 250V 800V
Output Current 108A 40.5A 21.6A 13.5A 4.32A
Output Power 1080W 1080W 1080W 1080W 1080W
Series and Parallel Capability
PSW Output Voltage 30V 80V 160V 250V 800V
Number of Parallel Units 3 3 3 3 3
Number of Series Units 2 2 2 ― ―
Environmental Conditions
Operating Temperature 0°C to 50°C
Storage Temperature -25°C to 70°C
Operating Humidity 20% to 85% R.H.; No condensation
Storage Humidity 90% R.H or less.; No condensation
Altitude 2000 meters maximum
General Specifications
Power 100V to 240V AC, 50/60Hz, single phase
Maximum Input Power 500VA (360W), 1000VA (750W), 1500VA (1080W)
Safety Complies with European Low Voltage Directive 2006/95/EC and carries CE-marking
Dimensions 360 Watt Models: 71mm (W) x 124mm (H) x 350mm (D)
720 Watt Models: 142mm (W) x 124mm (H) x 350mm (D)
1080 Watt Models: 214mm (W) x 124mm (H) x 350mm (D)
Weight 360 watt Models: 3.0kg approx.
720 Watt Models: 5.3kg approx.
1080 Watt Models: 7.5kg approx.
Ordering Information
Model PSW-30-36 360 Watt Programmable Switching DC Power Supply (30V / 36A)
Includes: GTL-240 USB cable, 1042-SWLV0301 Output Terminal cover, PSW-004 Basic Accessory kit,
GTL-123 Test leads, CD-ROM User manual and programming manual, and Regional Dependent Power Cord
Model PSW-80-13.5 360 Watt Programmable Switching DC Power Supply (80V / 13.5A)
Includes: GTL-240 USB cable, 1042-SWLV0301 Output Terminal cover, PSW-004 Basic Accessory kit,
GTL-123 Test leads, CD-ROM User manual and programming manual, and Regional Dependent Power Cord
Model PSW-160-7.2 360 Watt Programmable Switching DC Power Supply (160V / 7.2A)
Includes: GTL-240 USB cable, 1042-SWLV0301 Output Terminal cover, PSW-004 Basic Accessory kit,
GTL-123 Test leads, CD-ROM User manual and programming manual, and Regional Dependent Power Cord
Model PSW-250-4.5 360 Watt Programmable Switching DC Power Supply (250V / 4.5A)
Includes: GTL-240 USB cable, 1042-SWLV0301 Output Terminal cover, PSW-008 Basic Accessory kit,
39BT-50900401 High voltage output terminal, CD-ROM User manual and programming manual, and Regional Dependent Power Cord
Model PSW-800-1.44 360 Watt Programmable Switching DC Power Supply (800V / 1.44A)
Includes: GTL-240 USB cable, 1042-SWLV0301 Output Terminal cover, PSW-008 Basic Accessory kit,
39BT-50900401 High voltage output terminal, CD-ROM User manual and programming manual, and Regional Dependent Power Cord
Model PSW-30-72 720 Watt Programmable Switching DC Power Supply (30V / 72A)
Includes: GTL-240 USB cable, 1042-SWLV0301 Output Terminal cover, PSW-004 Basic Accessory kit,
GTL-123 Test leads, CD-ROM User manual and programming manual, and Regional Dependent Power Cord
Model PSW-80-27 720 Watt Programmable Switching DC Power Supply (80V / 27A)
Includes: GTL-240 USB cable, 1042-SWLV0301 Output Terminal cover, PSW-004 Basic Accessory kit,
GTL-123 Test leads, CD-ROM User manual and programming manual, and Regional Dependent Power Cord
Model PSW-160-14.4 720 Watt Programmable Switching DC Power Supply (160V / 14.4A)
Includes: GTL-240 USB cable, 1042-SWLV0301 Output Terminal cover, PSW-004 Basic Accessory kit,
GTL-123 Test leads, CD-ROM User manual and programming manual, and Regional Dependent Power Cord
Model PSW-250-9 720 Watt Programmable Switching DC Power Supply (250V / 9A)
Includes: GTL-240 USB cable, 1042-SWLV0301 Output Terminal cover, PSW-008 Basic Accessory kit,
39BT-50900401 High voltage output terminal, CD-ROM User manual and programming manual, and Regional Dependent Power Cord
Model PSW-800-2.88 720 Watt Programmable Switching DC Power Supply (800V / 2.88A)
Includes: GTL-240 USB cable, 1042-SWLV0301 Output Terminal cover, PSW-008 Basic Accessory kit,
39BT-50900401 High voltage output terminal, CD-ROM User manual and programming manual, and Regional Dependent Power Cord
Model PSW-30-108 1080 Watt Programmable Switching DC Power Supply (30V / 108A)
Includes: GTL-240 USB cable, 1042-SWLV0301 Output Terminal cover, PSW-004 Basic Accessory kit,
GTL-123 Test leads, CD-ROM User manual and programming manual, and Regional Dependent Power Cord
Model PSW-80-40.5 1080 Watt Programmable Switching DC Power Supply (80V / 40.5A)
Includes: GTL-240 USB cable, 1042-SWLV0301 Output Terminal cover, PSW-004 Basic Accessory kit,
GTL-123 Test leads, CD-ROM User manual and programming manual, and Regional Dependent Power Cord
Model PSW-160-21.6 1080 Watt Programmable Switching DC Power Supply (160V / 21.6A)
Includes: GTL-240 USB cable, 1042-SWLV0301 Output Terminal cover, PSW-004 Basic Accessory kit,
GTL-123 Test leads, CD-ROM User manual and programming manual, and Regional Dependent Power Cord
Model PSW-250-13.5 1080 Watt Programmable Switching DC Power Supply (250V / 13.5A)
Includes: GTL-240 USB cable, 1042-SWLV0301 Output Terminal cover, PSW-008 Basic Accessory kit,
39BT-50900401 High voltage output terminal, CD-ROM User manual and programming manual, and Regional Dependent Power Cord
Model PSW-800-4.32 1080 Watt Programmable Switching DC Power Supply (800V / 4.32A)
Includes: GTL-240 USB cable, 1042-SWLV0301 Output Terminal cover, PSW-008 Basic Accessory kit,
39BT-50900401 High voltage output terminal, CD-ROM User manual and programming manual, and Regional Dependent Power Cord
Optional Accessories
Model GET-001 Extended terminal for 30V, 80V, and 160V models
Model GET-002 Extended terminal for 250V and 800V models
Model PSW-001 Accessory kit for PSW-Series
Model PSW-002 Simple IDC Tool
Model PSW-003 Contact removal tool
Model PSW-005 Series operation cable for 2 units (30V,80V, and 160V models only)
Model PSW-006 Parallel operation cable for 2 units
Model PSW-007 Parallel operation cable for 3 units
Model GRA-410-3 Rack mount adapter (JIS)
Model GRA-410-E Rack mount adapter (EIA)
Model GUG-001 GPIB to USB adapter
Model GTL-130 Test leads: 2 x red, 2 x black (for 250V, and 800V models only)
Model 57RG-30B00201 Large filter (for 720W and 1080W models)

The post GW Instek PSW-Series Programmable Switching DC Power Supply appeared first on rapid-tech.

]]> https://rapid-tech.com.au/gw-instek-psw-series-programmable-switching-dc-power-supply/feed/ 0 GW Instek PSH-Series Programmable Switching DC Power Supply https://rapid-tech.com.au/gw-instek-psh-series-programmable-switching-dc-power-supply/ https://rapid-tech.com.au/gw-instek-psh-series-programmable-switching-dc-power-supply/#respond Mon, 15 Feb 2016 01:11:32 +0000 http://sitebuilds.net/rapidtech/product/gw-instek-psh-series-programmable-switching-dc-power-supply/ GwInstek_logo_index

The PSW-Series are single output from 360 Watts to 1080 Watts, programmable switching DC power supplies. OVP, OCP, OTP protect the power supply and loads from unexpected conditions. Remote sensing adds an extra level of precision by compensating cable losses between loads. The bright LCD with simultaneous parameter outputs allows effortless operation.

Self-test and software calibration features also reduce maintenance efforts. SCPI commands and LabView driver access through the RS-232C or the optional GPIB interface allows remote control and ATE software development. Modular architecture, dedicated rear-panel output, and the 19-inch 4U rack mounting option ensure that the PSH-Series is optimized for large systems.

The post GW Instek PSH-Series Programmable Switching DC Power Supply appeared first on rapid-tech.

]]> GW Instek PSH-Series Features:

  • Wide input voltage and high power factor (PF).
  • high efficiency and high power density.
  • Constant voltage and constant current operation.
  • Over voltage, over current, and over temperature protection.
  • Low ripple and noise.
  • Output On/Off control.
  • Self-test and software calibration.
  • LabView driver.
  • Standard Interface: RS-232C.
  • Optional Interface: GPIB (IEEE-488.2)
GW Instek PSH-Series Specifications
Models PSH-2018A PSH-3610A PSH-3620A PSH-3630A
Output Voltage 20V 36V 36V 36V
Output Current 18A 10A 20A 30A
Power 360W 360W 720W 1080W
General Specifications
Power 90V to 250V AC, 50/60Hz
Dimensions (W / H / D) 108mm x 142mm x 393mm 108mm x 142mm x 393mm 188mm x 142mm x 393mm 268mm x 142mm x 393mm
Weight 3.3kg 3.3kg 6.2kg 9.3kg
GW Instek PSH-Series Ordering Information
Model PSH-2018A 360 Watt Programmable Switching DC Power Supply (20V / 18A)
Includes: User manual and Power cord.
Model PSH-3610A 360 Watt Programmable Switching DC Power Supply (36V / 10A)
Includes: User manual and Power cord.
Model PSH-3620A 720 Watt Programmable Switching DC Power Supply (36V / 20A)
Includes: User manual and Power cord.
Model PSH-3630A 1080 Watt Programmable Switching DC Power Supply (36V / 30A)
Includes: User manual and Power cord.
Option
PSH-Series Opt.01 GPIB Interface (Factory Installed)
Please Note: When Opt.01 is ordered, the standard RS-232C interface will be replaced by the GPIB interface
Optional Accessories
Accy. GRA-403 Rack Adapter Panel (19-inch, 4U)
Accy. GTL-232 RS-232C cable, 9-pin Female to 9-pin, null Modem for computer
Accy. GTL-351 GPIB-USB-HS (High Speed)
Free Download
PC Software PC Software including Data Log; Remote Control Software
Driver LabView Driver

The post GW Instek PSH-Series Programmable Switching DC Power Supply appeared first on rapid-tech.

]]> https://rapid-tech.com.au/gw-instek-psh-series-programmable-switching-dc-power-supply/feed/ 0 GW Instek PSU-Series Programmable Switching DC Power Supply https://rapid-tech.com.au/gw-instek-psu-series-programmable-switching-dc-power-supply/ https://rapid-tech.com.au/gw-instek-psu-series-programmable-switching-dc-power-supply/#respond Mon, 15 Feb 2016 01:11:32 +0000 http://sitebuilds.net/rapidtech/product/gw-instek-psu-series-programmable-switching-dc-power-supply/ GwInstek_logo_index

The PSU-Series is a single output programmable switching DC power supply covering a power range up to 1520 watts. This Series of products include five models with the combination from 6 Volts to 60 volts rated output. As the PSU-Series can be connected in series (2 units) or in Parallel for maximum (4 units), capacity of connecting multiple PSU-Series for higher voltage or higher current output provides a broad coverage of applications.

The post GW Instek PSU-Series Programmable Switching DC Power Supply appeared first on rapid-tech.

]]> The Constant Current/Constant Voltage (C.V. / C.C.) priority selection of the GW Instek PSU-Series is a very useful feature for Device Under Test (DUT) protection. The conventional power supply normally operates under C.V. mode when the power supply is turned on. This could bring inrush current to the capacitive load or current-intensive load at the power output ON stage. Though the current becomes stable after the C.C. mode is activated, the current spike occurred at the C.V. and C.C. crossover point may possibly damage the DUT. At the power output stage, the PSU-Series is able to run under C.C. priority to limit the current spike occurred at the threshold voltage and therefore protects the DUT from the inrush current damage.

The Over Voltage Protection and Over Current Protection (OVP & OCP) protections can prevent the DUT damage. Both OVP and OCP levels can be selected in the range of 10% to 110%, with the default level set at 110%, of the rated voltage / current of the power supply. The PSU-Series provides USB Host / Device, LAN, RS-232C with RS-485 and Analog Control Interfaces as standard. The LabView driver is available at the rear panel for external control of the power On / Off and the external monitoring of the output voltages and current.

GW Instek PSU-Series Features:

  • Voltage Rating: 6V, 12.5V, 20V, 40V, and 60V.
  • Output Power Rating: 1200 Watts to 1520 Watts.
  • CV / CC Priority; Particularly Suitable for Battery and LED Industry.
  • Adjustable Slew Rate.
  • Series and Parallel operation.
  • High Efficiency and High Power Density.
  • 19-inch Rack Mount size design.
  • Standard Interfaces: LAN, RS-232, and RS-485, USB (Device / Host), Analog Control Interface.
  • Optional Interface: GPIB, Analog Control Interface
    (Isolated Voltage Control), Analog Control Interface (Isolated Current Control).
Specifications
Models PSU 6-200 PSU 12.5-120 PSU 20-76 PSU 40-38 PSU 60-25
Output Voltage 0 ~ 6V 0 ~ 12.5V 0 ~ 20V 0 ~ 40V 0 ~ 60V
Output Current 0 ~ 200A 0 ~ 120A 0 ~ 76A 0 ~ 38A 0 ~ 25A
Power 1200W 1500W 1520W 1520W 1500W
Environmental
Environment Indoor use, installation category II (AC Input), pollution degree 2
Operating Temperature 0°C to 50°C
Storage Temperature -25°C to 70°C
Operating Humidity 20% to 85% R.H.
Storage Humidity Range Up to 90% or less R.H. (no condensation)
General Specifications
Power 100V to 240V AC, 50/60Hz
Input Range 85V to 265V AC
Power Factor 0.99 / 0.98 (100Vac / 200Vac)
Maximum Input Current 21A (100Vac), 11A (200Vac)
Inrush Current ≤ 50A
Dimensions 423mm (W) x 43.6mm (H) x 447.2mm (D)
Weight 8.7kg approx.
Ordering Information
Model PSU 6-200 1200W Single Channel Programmable Switching DC Power Supply (0 to 6V / 0 to 200A)
Including: User manual + programming user manual CD, Quick start guide, Output terminal cover, Analog connector plug kit, Output terminal M8 bolt set, Input terminal cover, two 1U handles, and a left and right 1U bracket.
Model PSU 12.5-120 1500W Single Channel Programmable Switching DC Power Supply (0 to 12.5V / 0 to 120A)
Including: User manual + programming user manual CD, Quick start guide, Output terminal cover, Analog connector plug kit, Output terminal M8 bolt set, Input terminal cover, two 1U handles, and a left and right 1U bracket.
Model PSU 20-76 1520W Single Channel Programmable Switching DC Power Supply (0 to 20V / 0 to 76A)
Including: User manual + programming user manual CD, Quick start guide, Output terminal cover, Analog connector plug kit, Output terminal M8 bolt set, Input terminal cover, two 1U handles, and a left and right 1U bracket.
Model PSU 40-38 1520W Single Channel Programmable Switching DC Power Supply (0 to 40V / 0 to 38A)
Including: User manual + programming user manual CD, Quick start guide, Output terminal cover, Analog connector plug kit, Output terminal M8 bolt set, Input terminal cover, two 1U handles, and a left and right 1U bracket.
Model PSU 60-25 1500W Single Channel Programmable Switching DC Power Supply (0 to 60V / 0 to 25A)
Including: User manual + programming user manual CD, Quick start guide, Output terminal cover, Analog connector plug kit, Output terminal M8 bolt set, Input terminal cover, two 1U handles, and a left and right 1U bracket.
Optional Accessories
Accy. GTL-246 USB cable, USB 2.0 A-B cable, 4P
Accy. GTL-248 GPIB cable (2 meters)
Accy. GTL-251 GPIB-USB-HS (High Speed)
Accy. PSU-01B Bus Bar for 2 units in parallel operation
Accy. PSU-01C Cable for 2 units in parallel operation
Accy. PSU-02B Bus Bar for 3 units in parallel operation
Accy. PSU-02C Cable for 3 units in parallel operation
Accy. PSU-03B Bus Bar for 4 units in parallel operation
Accy. PSU-03C Cable for 4 units in parallel operation
Accy. PSU-232 RS-232 cable with DB9 connector kit
Accy. PSU-485 RS-485 cable with DB9 connector kit
Accy. GRM-001 Slide bracket 2pcs/set
Accy. PSU-GPIB PSU GPIB Interface Card (Factory Installed)
Accy. PSU-ISO-I Isolated current remote control card (Factory Installed)
Accy. PSU-ISO-V Isolated voltage remote control card (Factory Installed)
Accy. GPW-001 UL/CSA power cord, 3 meters
Accy. GPW-002 VDE power cord, 3 meters
Accy. GPW-003 PSE power cord, 3 meters

The post GW Instek PSU-Series Programmable Switching DC Power Supply appeared first on rapid-tech.

]]> https://rapid-tech.com.au/gw-instek-psu-series-programmable-switching-dc-power-supply/feed/ 0