Electric and hybrid vehicle repairs are entering every Australian workshop, but diagnosing motor-generator unit failures remains expensive guesswork. OEM diagnostics point to fault codes without confirming whether the issue sits in the MGU, power inverter module, or elsewhere in the drivetrain. Misdiagnosis means wasted hours and parts bills running into thousands—with no guarantee you’ve fixed the actual problem. Meanwhile, customers expect faster turnaround than traditional mechanical repairs, and MGU replacement costs demand absolute certainty before committing to the repair.

You need definitive answers on motor health without tearing down the entire drivetrain or sending vehicles out for specialist diagnosis.

Your Complete EV Motor Diagnostic Solution

The ALL-TEST PRO 34 EV transforms how Australian workshops handle electric vehicle motor diagnostics. This purpose-built tester is the only handheld instrument specifically engineered for permanent magnet motors and generators in hybrid and electric vehicles—giving you comprehensive motor health analysis in under three minutes.

Unlike improvised testing methods or generic motor testers, the 34 EV evaluates every critical component: stator windings, rotor magnets, contamination levels, ground faults, and connection integrity. You’re testing the complete electrical circuit of the MGU without rotating the motor, energizing high-voltage systems, or disconnecting the drivetrain. That means diagnosis happens safely in your service bay with the HV system disabled—no road testing, no complex teardown, just clear answers on motor condition.

The patented Motor Circuit Analysis (MCA) technology performs deenergized testing that reveals developing faults long before catastrophic failure. You’re catching winding deterioration, rotor magnet degradation, and contamination issues at stages where they’re still repairable—or confirming with confidence that an MGU has reached end-of-life and requires replacement.

How It Delivers Results Australian Workshops Need

Static Testing for Baseline Motor Health The static test measures five critical parameters: resistance, inductance, impedance, capacitance, and phase angle across all three phases. These measurements feed into the proprietary Test Value Static (TVS) algorithm—a single numerical indicator of overall motor health. You compare this TVS value against baseline data (either from previous tests or reference values for that vehicle model) to instantly spot drift from normal operating condition. Changes in TVS flag developing problems in stator windings or rotor magnets before they show up as performance issues or trigger fault codes.

Static testing requires zero rotor movement, which means you’re diagnosing motors that are locked, seized, or mechanically disconnected—situations where traditional testing methods fail completely.

Dynamic Testing for Detailed Fault Analysis When static results indicate potential issues—or when establishing initial baselines—the dynamic test provides deeper diagnostic insight. By manually rotating the motor shaft through its range, the 34 EV captures real-time measurements that reveal specific fault signatures. The instrument analyzes this data and delivers clear Pass/Warning/Fail indicators for resistance balance, stator condition, rotor integrity, and contamination levels.

Dynamic testing identifies which specific component is degrading, so you’re not replacing entire assemblies when a targeted repair might solve the problem. For incoming used EVs or post-repair verification, dynamic tests confirm motor condition before customer handover.

Insulation Testing That Matters Integrated megohmmeter functionality tests insulation resistance at both 500V and 1000V, reading up to 999 megohms. This catches ground fault development and insulation breakdown that compromise motor safety and performance—critical for high-voltage systems where insulation failure can be catastrophic. You’re conducting proper dielectric testing without carrying separate megohmmeters or risking equipment that wasn’t designed for EV voltage levels.

Built for Real Workshop Conditions

The 34 EV handles the reality of Australian automotive work. The rugged handheld design fits in your toolbox and survives the knocks of daily workshop life. The full-colour touchscreen remains readable in bright workshop lighting and guides you through testing with on-screen step-by-step instructions—no hunting through manuals or memorizing complex procedures.

Battery power means you’re testing vehicles anywhere in the workshop or out in customers’ driveways without hunting for power points. The intuitive interface gets new technicians conducting accurate tests within minutes, while experienced diagnostic techs appreciate the depth of data available for complex fault analysis.

Results display instantly on a single screen with clear health indicators. You’re showing customers exactly what’s wrong with their MGU using concrete test data rather than educated guesses based on fault codes. That transparency builds trust and justifies repair costs when customers understand they’re replacing genuinely failed components.

Applications Across Your EV Service Work

Pre-Purchase Inspections Used EV buyers increasingly request independent motor health verification before committing to purchase. The 34 EV delivers objective motor condition assessment that protects buyers from expensive surprises—and positions your workshop as the go-to facility for comprehensive EV pre-purchase inspections. Test the MGU health in minutes and provide documented evidence of motor condition.

Fault Diagnosis & Repair Verification When hybrid or EV customers arrive with reduced power, unusual noises, or performance issues, you need to isolate whether the problem originates in the motor, inverter, or elsewhere. The 34 EV definitively confirms motor health or identifies specific faults—ending the expensive trial-and-error of replacing components until symptoms resolve. Post-repair testing verifies that replacement MGUs or rebuilt motors meet specification before reinstallation.

Fleet Preventative Maintenance Fleet operators managing hybrid or electric vehicles need predictive maintenance programs that prevent roadside failures. Regular 34 EV testing establishes trending data for each vehicle’s MGU, flagging developing issues during scheduled services rather than after breakdown. You’re offering fleet customers genuine condition-based maintenance rather than time-based replacement guesswork.

Workshop Equipment & Tool Testing Automotive training facilities and technical colleges teaching EV technology need reliable diagnostic equipment that trains students on industry-standard testing methods. The 34 EV’s guided interface and comprehensive testing capabilities make it ideal for educational environments while delivering professional-grade results.

Technical Capabilities for Australian Conditions

Tests three-phase permanent magnet motors and generators in vehicles under 1000V—covering virtually every hybrid and EV entering Australian workshops from Prius to Tesla. The instrument handles extreme ambient temperatures found in Australian service bays without requiring climate control or special storage.

The patented TVS technology eliminates rotor position dependency, meaning you get accurate results regardless of where the motor sits in its rotation—critical when testing motors that won’t rotate freely or are mechanically locked. This makes the 34 EV uniquely capable of diagnosing motors that other methods can’t test at all.

Optional PC software extends capabilities for workshops managing multiple test records, generating customer reports, or conducting detailed analysis of motor trends over time. The software imports test data for archiving, comparison, and professional documentation that supports warranty claims or insurance assessments.

APPLICATIONS & USE CASES

Automotive Workshops Expand your hybrid and EV service capabilities with definitive motor diagnostics. Test MGU health during routine services, diagnose performance complaints, and verify repair quality before customer handover. Build reputation as the local EV specialist with objective motor testing capabilities.

Mobile Mechanics & Roadside Service Diagnose EV motor faults on-site without towing vehicles to facilities with specialized equipment. The portable 34 EV delivers workshop-quality results in customers’ driveways—perfect for pre-purchase inspections or breakdown diagnosis where vehicle mobility is limited.

Fleet Maintenance Operations Implement condition-based maintenance for hybrid and electric fleet vehicles. Regular MGU testing identifies degrading motors during scheduled services, preventing costly roadside failures and optimizing replacement timing based on actual component condition rather than guesswork.

Automotive Training & Education Train the next generation of automotive technicians on proper EV motor diagnostic procedures. The 34 EV’s intuitive interface and comprehensive testing capabilities teach industry-standard methods while delivering professional results students can trust.

Used EV Inspection Services Offer independent motor health certification for used EV transactions. Buyers increasingly demand professional motor assessment before purchase—positioning your business to capture this growing inspection market with documented MGU condition reporting.

The post ALL-TEST PRO 34 EV Motor Tester | Electric Vehicle Diagnostics appeared first on rapid-tech.

Enhance your construction and plumbing capabilities with the TvbTech TPL200 Sonde and Power Line Locator. A quintessential addition to your toolkit, the TPL200 exemplifies precision engineering for detecting a wide range of frequencies – 512Hz, 640Hz, and 33kHz – tailored to suit industry-standard requirements. Embrace the prowess of this elaborate tool to accurately discern the intricacies within pipelines, streamlining your work with remarkable efficiency.

Product Features

• Dynamic Frequency Selection: Choose from 512Hz, 640Hz, or 33kHz frequencies for pinpoint accuracy in pipeline detection.
• Safety-Centric Power Line Detection: Adeptly reveals 50/60Hz power lines, ensuring your excavation activities are conducted with utmost safety.
• Comprehensive RF Reception: Boasts signal-detection capabilities within the 6KHz-22KHz spectrum.
• Extended Signal Range: The TPL200 guarantees up to 10 meters of detection reach, even in open spaces.
• Intuitive User Interface: Features a clear display with signal level indicators alongside adjustable sensitivity settings for precise and straightforward localization.
• Audible Alerts for Convenience: Versatile auditory feedback through either an internal speaker or headphones for signal monitoring.
• Sturdy & Comfortable Design: With a mere 2KG weight, the device is IP65 certified against ingress, promising durability in various work conditions.
• Adaptable Operating Conditions: Performs optimally in a temperature range from -10 ℃ to 50 ℃.
• Sustainable Battery Performance: Outfitted with a rechargeable lithium battery, sustaining up to 10 hours of operation with a swift 3-hour recharge via USB-Type C.

Key Benefits

• Reduce Project Timelines: Invaluable tool for swiftly locating pipeline issues, curtailing downtime, and enhancing the pace of project completions.
• Augmented Safety Measures: Protect your team by detecting underground power lines during excavation, mitigating risk.
• Rugged, Mobile Construction: Designed to survive the rigours of daily use, the TPL200 is eminently portable.
• User-Friendly Operations: Tailored for ease of use with adjustable controls and a backlit LCD display, making it suitable for all proficiency levels.
• Lengthier Operating Hours: The extended battery life facilitates uninterrupted work for the entirety of a typical day.

The TvbTech TPL200 is your solution for navigating the challenges of modern plumbing and construction. With its specialized tracking capabilities and enduring design, it proves to be an essential instrument for professionals aiming for excellence in their field.

Elevate your project outcomes with the TvbTech TPL200 Sonde and Power Line Locator – your indispensable ally for accuracy and efficiency.

The post TvbTech TPL200 Professional Sonde and Power Line Locator for Construction and Plumbing – Precise Frequency, 10m Range, IP65 Rated appeared first on rapid-tech.

Keeping a watchful eye on equipment and systems is vital to keeping them running smoothly and avoiding costly downtime. But sometimes, the target you need to inspect is out of reach or difficult to access. That’s where the FLIR ONE Edge Pro comes in. This innovative thermal camera wirelessly connects to your smart device, so you can easily take crisp, clear images from any position or angle.

The FLIR ONE Edge Pro uses 160 × 120 (19,200 pixels) thermal resolution and VividIR™, FLIR MSX® (Multi-Spectral Dynamic Imaging) technology to produce high-quality thermal images. This allows you to see temperature differences and subtle details that would be invisible to the naked eye. And with FLIR Ignite™, you can instantly upload images and videos from your FLIR ONE Edge Pro to the cloud for easy sharing and editing.

Compatible with iOS and Android smartphones and tablets, the FLIR ONE Edge Pro is an incredibly versatile tool that will help you keep a close eye on your critical equipment. Whether you’re in preventative maintenance or troubleshooting mode, the FLIR ONE Edge Pro is an invaluable tool for maintaining optimal operations.

Ordering guide

KEY DIFFERENTIATED FEATURES

• WIRELESS IMAGE TRANSFER
  • Wireless streaming of images to the smart phone or tablet
  • Camera compatible with all phones and tablets with iOS or Android
  • Enables easier scaling of tool to hundreds or thousands of technicians
  • Futureproof against phone or tablet changes

• DETACHABLE WAND DESIGN
  • Unique, detachable wand design
  • Enables easy scanning over, under and around obstacles
  • Fits better on phone and tablets without blocking cameras or awkward holding of device

• UNIQUE DECISION SUPPORT APPS
  • FLIR Tools Mobile with FLIR Ignite allows for automatic secure upload of image data and sharing to selected team members
  • New Apps for Home Inspection, Automobile Inspection, and Industrial Inspection to support inexperienced thermographers to make good decisions

The post FLIR ONE EDGE Pro – | FLIR appeared first on rapid-tech.

The Cx5’s T-Class surveys make it quick and easy to use, eliminating the need to acquire hot work permits, making it a safer option for inspections in hazardous locations.

The FLIR Cx5 is a truly versatile device. Not only can it be used as a thermal camera to detect temperature differences in the environment around you (160 x 120 resolution), but it can also be used as a digital camera with its impressive 5MP image quality. With adjustable emissivity settings, this device provides accurate temperature readings and enhanced color palettes to better reveal heat sources.

With a 160 x 120 resolution, it provides accurate temperature measurement of nearby targets. The 3.5-inch touchscreen interface is simple to use, and the built-in FLIR Ignite™ cloud service provides direct data transfer, storage, and backup. So you can be confident that your images are always available and easy to share. The FLIR Cx5 is ideal for investigating mechanical and electrical equipment around your production site.

INSPECT SAFELY IN EXPLOSIVE ENVIRONMENTS

• Use FLIR MSX to safely investigate potential problems from a distance using thermal imaging with 160×120 true resolution and 1-Touch Level/Span.

RUGGED, RELIABLE, AND CERTIFIED

• The Cx5 is a safe and efficient alternative to hot work permits in hazardous locations, meeting gas, vapor and dust, and it conforms to restricted breathing and dust protection standards.

UPLOAD AND SHARE DATA INSTANTLY

• With FLIR Ignite™, you can wirelessly upload and share data, images, and files to the cloud. You can also synchronize the camera with FLIR Thermal Studio software for thermography analysis and report generation.

The post FLIR Cx5 Hazardous Location-Rated Thermal Camera – | FLIR appeared first on rapid-tech.

The post FLIR VS80 Kits – High-Performance Videoscope | FLIR appeared first on rapid-tech.

This CEM BS-151 Video Borescope captures and displays video of objects in small spaces that are very hard to reach. Using this device, inspectors can visually inspect and observe objects through a small opening. Displaying the video or image of the object on the LCD screen allows easy observation of the object.

CEM BS-151 has a 3.2″ color TFT LCD with support for photo/video, time/date display, and multi-languages. You can also transfer videos and images using the SD Card or USB cable included. Waterproof(IP67) flexible gooseneck retains configured shape.

• 320×240 LCD Pixels
• 3.5″TFT LCD screen type
• The max number of frames(FPS) 30FPS/S
• Picture format from the camera JPG(640×480)
• 8 powerful functions, performance upgrade
• 10 Level brightness regulation LED light 
• IP67 waterproof video lens
• USB charging function, SD card
• Supporting photo/video
• Support TV output
• Multi-language menu function 
• Screen rotation function

CEM BS-151 video borescope inspection camera is suitable for a variety of industrial fields such as industry machinery, auto repair, pipeline, building, chemical, and other fields.

• Air conditioning maintenance 
• Household and other fields
• Automobile maintenance 
• Pipeline maintenance

The post Video Borescope | CEM BS-151 appeared first on rapid-tech.

Application

• Hospitals blood/Tissue banks
• Warehouses 
• Laboratories
• Computer rooms
• Chambers / Incubator
• Clean rooms
• Green house 
• Electronics manufacturing
• Defence 
• Refrigerators/Freezers
• Other Critical areas

The post Indoor Air Quality, Carbon Dioxide (CO2) Monitor | Desktop / Wall Mounted | Tenmars TM-187A appeared first on rapid-tech.

• User friendly
• High-quality audio system with vibration alerts for noisy environments and sun light readable display
• Ensure reliable results with sensitive and accurate signal processing

Capable of adapting to difficult situations

• A perfect solution for congested underground infrastructure
• Rejects strong interfering signals
• Locate target power cable when several are present

On-site best practices driven by technology

• Ensures improved detection by correct locator handling
• Using the automatic usage logging feature, you can monitor field operations
• Adding value to your client’s operations by differencing yourself from your competition

Premium quality, ergonomic design

• Rugged yet light weight and ergonomic
• Designed and built in Great Britain to the highest standards
• Self Test for confidence and trust in your locator measurements

Calibration Certificates and eCert

The post Radiodetection RD8200 Underground Services Locator | Cable and Pipe Locator appeared first on rapid-tech.

Applications

Determining moisture in wood

Moisture content is a decisive factor in the further processing and use of timber products. If wood is installed with the wrong moisture content this may result in mechanical deformations (contracting and swelling) at the site where the material is subsequently used, and therefore damage to pieces of furniture or entire supporting structures in buildings. Therefore, before being made into furniture or supporting material by a joiner/carpenter, the suitability of the wood has to be assessed by measuring the moisture content.
weight in comparison to the dry mass of the material.

Delivery Scope

The post Material Moisture Meter | testo 616 appeared first on rapid-tech.

The Testo 300 Flue gas analyzer is truly a smart flue gas measurement instrument for use on heating systems. High-quality sensors, intuitive operation with smart-touch technology and smart features, such as efficient documentation and e-mailing of reports, The Testo 300 will make your day-to-day work easier.

Testo 300 flue gas analyzer with smart-touch operation

Impressive measuring technology and quality

• O₂ sensor and CO sensor up to 4,000 ppm
• Longer sensor service life thanks to automatic sensor protection
• TÜV-tested according to first German Federal Immission Control Ordinance (BImSchV) and EN 50379, Parts 1-3
• Integrated fine pressure
• Versatile probes and fast probe changes: take advantage of quick-change probes and the multi-functional handle for attaching a variety of probe shafts (each available to order separately). You can for instance use longer probe shafts for flue gas pipes with larger diameters or flexible probes for difficult-to-access measuring points
• Optionally available probes and accessories for further measuring tasks, such as gas flow pressure measurement, gas pipe testing, differential temperature measurement and ambient CO measurement

 Smart, intuitive, efficient: easy operation in day-to-day work

• Smart-touch display for intuitive operation of the flue gas analyzer: the display responds without delay – just as easy as on your smartphone
• Get the measurement result faster: clearly structured measurement menus for all relevant measurements
• Create documentation (including measuring value, measuring location, customer data) easily on site
• Save PDF measurement reports directly in the instrument and always have them available
• Signature function: your customer can sign measurement reports directly on the instrument
• E-mail measurement reports directly to the office or to customers via WLAN (hotspot)
• Large 5-inch HD display – enables you to see all the system’s parameters immediately
• Testo interface function for direct data transfer of measuring values to industry/customer-specific software*
• Ready to use straight away: in standby mode, the testo 300 is ready to measure at the touch of a button. Use it straight away with the next customer – because you no longer need to wait for the end of the zeroing phase
• Integrated Bluetooth^® interface: immediate printout of the measuring values on site with the appropriate printer

*Note: the manufacturer has to integrate an interface into the industry software to use the function

 Other advantages

• 10-hour rechargeable battery life: an average measurement period of 2 hours means the flue gas analyzer is capable of being used for one week
• Integrated, extra-strong magnets for easy fixing during the measuring process

Flue gas measurement on heating systems

* Please note: additional probes or accessories are required for these measurements and have to be ordered separately.

Models, Probes and Accessories

Refer to Testo 300 Datasheet for information on available models, probes and accessories.

Testo 300 Flue gas analyzer Specification

The post Flue gas analyzer (O2, CO up to 4,000 ppm) | Testo 300 Domestic Kit appeared first on rapid-tech.