Every thermographer knows the routine. The scan itself takes minutes, but getting to it can take days: permits, PPE, a second person, and sometimes a shutdown that nobody on site wants to schedule. Then the door comes off a live board, and you’re working closest to the equipment at the very moment you’re trying to find out whether something in there is failing.

Opening up has a technical downside too. Pull a door and you change the airflow and heat inside the enclosure, so what you’re imaging isn’t quite how that board normally runs. And plenty of components never get checked at all, because they sit behind panels that are too hard or too disruptive to open on a routine round.

An infrared inspection window deals with both problems. It’s a permanent, sealed viewing port built into the enclosure, so you can inspect through it with the door shut and the assets undisturbed.

A Much Bigger View Into the Board

The FLIR IRW large format series takes a different approach from small round windows. Instead of a crystal lens, it uses an impact-resistant polymer optic, and that material is what makes a window this size practical. The largest model has a viewing aperture 53 cm wide, which can cover a long row of terminations or a full run of busbar joints from one port.

That matters when you’re building an inspection route. A wider view can mean fewer windows per panel and fewer blind spots, and it brings in components that a smaller port might not reach. Before you commit, map your targets against the aperture sizes below and confirm the sightlines on the actual board.

The optic isn’t only for thermal work. It transmits visual, ultraviolet, midwave IR and longwave IR, so the same port can support a look-through visual check or a UV inspection as well as your regular thermal route.

Behind the polymer sits a reinforcing metal grille that meets the IP2x standard for maximum opening size. In plain terms, that’s the finger-safe protection level, designed to keep a fingertip or an object of 12.5 mm or larger out of the live compartment. A lockable cover protects the viewing pane between inspections from dust, knocks and flying debris.

Aluminium or Stainless Steel: Which One Do You Need?

The material choice comes down to where the window will live.

Aluminium body (IRW-12PC, IRW-24PC) is FLIR’s recommendation for indoor installations. It’s rated IP65 / NEMA 4X, with a maximum operating temperature of 200°C. It’s also the lighter option, which helps if you’re fitting a batch across a plant room, MCC or switch room.

Powder-coated stainless steel body (IRW-6PS, IRW-12PS, IRW-24PS) is the one FLIR recommends for outdoor work. It steps up to IP67 / NEMA 6 and a 273°C maximum operating temperature, and it uses a stainless steel reinforcing grille. It suits kiosks, pad-mounted transformers, and sites where weather, washdown or corrosive atmospheres would be hard on a lighter build. The stainless versions also carry a broader list of IEEE and IEC approvals, covered further down.

Quick rule of thumb: indoors in a controlled switch room, start with aluminium. Outdoors or anywhere harsh, go stainless. The 6 in size is available here in stainless only.

Choosing the Right Size

The 6, 12 and 24 in names refer to the window’s approximate overall width. The viewing aperture is smaller, so always size your window from the aperture.

Built to Stay Put for the Long Haul

An IR window becomes part of the enclosure, so it needs to last as long as the switchgear around it. FLIR specifies these windows with fully impact-resistant optics, 316 stainless steel fixing hardware and a UL 94 5VA-rated gasket. The polymer has been shown to stand up to acids, alkalis, UV, moisture, humidity, vibration and high-frequency noise, and the optic is rated from −40°C to 325°C.

The window suits any system voltage, including medium and high voltage applications, and FLIR lists it as automatically grounded. It still needs to be installed with proper electrical clearances, and your usual earth continuity checks still apply.

FLIR backs the range with a limited lifetime warranty.

Getting Accurate Temperatures Through the Window

This is the part that catches people out. Any window between your camera and the target absorbs some of the infrared signal, and if you don’t compensate for it, your temperature readings will come in low.

FLIR’s installation manual asks you to determine the transmission rate of the window you’re fitting and write it on the IR window label supplied in the box. That label also has space for the number of targets and their emissivity, plus a pre-printed barcode so each window can be uniquely identified. Enter the transmission value in your camera before you measure.

The fixed, stable transmission of the optic is what makes repeat readings comparable over time, which is the basis of good trending. Because the value can vary with your camera, measure it with the instrument you’ll be using on the route, and redo the check if you change cameras. Also note that the reinforcing grille sits across the viewing area, so it’s worth trialling your camera and lens on the first window you fit.

Installation: Read This Before You Cut

Caution: These dimensions are not installation dimensions. Do NOT cut prior to receiving your FLIR window and installation template.

Each window goes onto a flat, vertical surface using the fitting template. FLIR’s manual calls for a nibbler or angle grinder, a drill with an 8 mm (5/16 in) bit, a centre punch, a deburring tool, a 7/16 socket or wrench, and an anti-corrosion treatment for the cut edges, plus gloves, safety glasses and your site PPE.

Plan the job for a shutdown, with the panel isolated and the door removed if you can, so swarf stays well away from live parts. Cutting into a board can also affect its IP rating, arc performance or type-test status, so talk to the board manufacturer or your engineer first.

Where These Windows Earn Their Keep

• Industrial switch rooms and MCCs: add wide-view ports to high-priority sections and shorten routine thermal rounds.
• Utility and distribution assets: monitor switchgear and transformers, with stainless models for outdoor kiosks and pad-mounted gear.
• Data centres and critical power: check power distribution with less disturbance to live, high-availability systems.
• Food and beverage manufacturing: keep inspection routes running on plant that’s expensive to stop.
• Ships, offshore and port facilities: the range carries Lloyd’s, ABS and DNV approvals for maritime and offshore use.

Approvals and Certifications

FLIR lists the following approvals. They differ by body material, so check the right column for your project.

These are mainly North American, marine and IEC approvals. If your job specifies a particular Australian standard or a type-tested board, confirm acceptance with the board manufacturer or your engineer before you cut.

Technical Specifications

Specifications by variation

Caution: These dimensions are not installation dimensions. Do NOT cut prior to receiving your FLIR window and installation template.

Common specifications and why they matter

What’s in the box

• FLIR IRW large format IR window (selected model)
• Fitting template and installation instructions
• IR window label
• Fitting hardware

What is an infrared inspection window?

An infrared inspection window is a permanent viewing port fitted to an electrical enclosure. It lets a technician inspect live equipment with a thermal camera while the door stays closed. FLIR’s IRW large format windows use a rectangular polymer optic that also passes UV and visible light.

Which FLIR IR window should I use outdoors?

Use a stainless steel IRW-xPS model. FLIR recommends the IRW-6PS, IRW-12PS and IRW-24PS for outdoor applications. They’re rated IP67 / NEMA 6, with a maximum operating temperature of 273°C. FLIR recommends the aluminium IRW-xPC models, rated IP65 / NEMA 4X, for indoor use.

What size IR window do I need for switchgear?

Choose the size by viewing aperture, not the nominal size. Height by width, the IRW 6 in aperture is 15 × 9.1 cm, the 12 in is 12.7 × 23.6 cm, and the 24 in is 15 × 53 cm. Check that every target is visible from your likely camera position.

Do you need to adjust a thermal camera when using an IR window?

Yes. An IR window reduces the infrared energy reaching the camera, so readings will be low unless you compensate. Determine the window’s transmission rate, record it on the supplied label, and enter it in your camera’s settings before measuring.

Does an IR window remove the need for arc flash PPE?

Not automatically. Keeping the door closed reduces exposure during inspection, but PPE requirements come from your site’s risk assessment and safety procedures. An IR window also doesn’t make a board arc-rated by itself, so have the installation and work method reviewed by your safety lead.

FAQ

What’s the difference between the FLIR IRW-xPC and IRW-xPS?

The IRW-xPC has an aluminium body and aluminium grille, is rated IP65 / NEMA 4X, and operates up to 200°C. FLIR recommends it for indoor use. The IRW-xPS has a powder-coated stainless steel body and stainless grille, is rated IP67 / NEMA 6, and operates up to 273°C. FLIR recommends it for outdoor use.

Which thermal cameras work with FLIR IRW large format windows?

The windows are specified for midwave and longwave infrared, as well as ultraviolet and visual inspection. They aren’t limited to one camera model, but you’ll need to determine the transmission rate with your own camera and check the view through the reinforcing grille.

Does the 6 in, 12 in or 24 in size refer to the viewing area?

No. It refers to the window’s approximate overall width. For example, the 24 in models are 61 cm wide overall, with a 53 cm wide viewing aperture. Use the aperture dimensions when working out what you’ll be able to see.

Can I cut the panel using the dimensions on this page?

No. These dimensions are not installation dimensions. Do NOT cut prior to receiving your FLIR window and installation template. The cut-out sizes listed are only there to help you check whether a window could fit your panel.

What tools do I need to install a FLIR IRW window?

FLIR’s manual lists a nibbler or angle grinder, a drill with an 8 mm (5/16 in) bit, a centre punch, a deburring tool, a 7/16 socket or wrench, and an anti-corrosion treatment for cut metal. You’ll also need gloves, safety glasses and your site’s required PPE.

Can these windows be used on medium and high voltage equipment?

Yes. FLIR lists the voltage range as any and specifies the series for medium and high voltage applications. The installation still needs to maintain the correct electrical clearances, so have it reviewed by the board manufacturer or a qualified engineer.

Are these windows approved for marine and offshore use?

FLIR lists Lloyd’s Type Approval, American Bureau of Shipping (ABS) and DNV approval for both body materials, with DNV covering maritime, vessel and offshore applications. If your vessel or class society has a specific requirement, confirm the current certificate before ordering.

Do they meet Australian standards?

FLIR’s published documentation lists UL, cUL, CSA, IEEE, IEC and marine approvals, but doesn’t list a specific Australian standard. If your project specifies one, confirm acceptance with your engineer or the board manufacturer. Our team can help you source the manufacturer documents you need.

The post FLIR Large Format IR Inspection Windows | IRW-12PC, IRW-24PC, IRW-6PS, IRW-12PS, IRW-24PS appeared first on rapid-tech.

The FLIR i35 App-Enabled Thermal Camera with LTE empowers technicians at any experience level to conduct fast, NFPA 70B-compliant inspections, improving both asset reliability and safety. Built around the ACE operating system, it delivers a familiar, responsive user experience akin to a smartphone. It includes a full suite of FLIR, third-party, and custom apps for enhanced productivity.

With sharp 320 × 240 IR resolution, an intuitive 5-inch touchscreen, and integrated Wi-Fi, Bluetooth, and LTE connectivity, the FLIR i35 streamlines every step. From capturing thermal images to cloud sharing and reporting happens seamlessly, even from remote locations.

The i35 is engineered to simplify and speed inspection workflows. Customizable applications help reduce manual data entry and improve consistency. This ensures your teams work efficiently in any environment. The platform actively guides less-experienced users, offering built-in training, safety information, and remote support. This raises the quality of inspections across your organization.

Documentation and communications are seamless with direct cloud uploads to FLIR Ignite. It has compatibility with FLIR Assetlink for advanced asset management, leveraging LTE for constant connectivity.

Rugged, portable, and IP54-rated, the FLIR i35 is designed for demanding industrial settings. It addresses key decision-making needs with real-time infrared analytics and time-saving automation. Whether you’re conducting electrical, mechanical, or building inspections, the i35 delivers the actionable intelligence needed to reduce downtime. It ensures compliance and protects equipment investments—all with the backing of trusted FLIR expertise.

Key Features

• 320 × 240 thermal resolution for sharp, detailed imagery
• ACE operating system with app-based workflow customization
• 5” capacitive touchscreen for intuitive operation, even with gloves
• Wi-Fi, Bluetooth, and LTE connectivity for instant uploads to FLIR Ignite and remote device integration
• NFPA 70B compliance support through robust measurement and analytics features
• Onboard guidance, training, and remote support tools
• IP54 rating for dust and water resistance, built for industrial use

The post FLIR i35 App-Enabled Thermal Camera Cellular appeared first on rapid-tech.

Features

• Reporting Done In Seconds – Connected workflows automate the reporting that used to eat up to half the job, so you can focus on the inspection, not the paperwork.
• Anyone Can Be An Expert – Intuitive, app-guided capture and on-device onboarding help less-experienced staff deliver expert-level results, reliably.
• See it. Share it. Now – 480 x 640 clarity plus built-in LTE for sharp insights and real-time collaboration from anywhere – secured to ISO 27001 standards.

Main Applications

• Electrical and mechanical inspections across industrial and utility environments, enabling early fault detection and reduced downtime.
• Enterprise-level condition monitoring programs with asset hierarchy, cloud-based data management, and team-wide collaboration.
• Building diagnostics and facility maintenance, including moisture detection, HVAC performance checks, and energy loss assessments.

The post FLIR i65 App-Enabled Thermal Camera with LTE (480 x 640) appeared first on rapid-tech.

With its impressive 640 x 480 IR resolution, the FLIR i64 produces clear, detailed thermal images that make it easy to identify potential issues like overheating components, energy loss, or moisture intrusion. The high thermal sensitivity allows for the detection of subtle temperature differences, ensuring no fault goes unnoticed. This level of precision is essential for preventative maintenance, helping you locate problems before they lead to costly downtime or equipment failure.

A key advantage of the FLIR i64 is its seamless integration with the FLIR mobile app. This functionality transforms your device into a powerful thermal imaging system, allowing you to view, analyse, and share images and videos in real-time. The app-based interface is intuitive, enabling quick adjustments to settings and measurement tools. Furthermore, with cloud integration, you can instantly upload your findings, generate professional reports, and collaborate with your team from any location. This streamlines the entire inspection workflow, from initial scan to final report, boosting efficiency and productivity.

Built to withstand demanding field conditions, the FLIR i64 features a rugged, drop-tested design. Its ergonomic construction ensures comfortable handling during extended use. Whether you are inspecting complex electrical panels, surveying HVAC systems, or assessing building envelopes, the FLIR i64 thermal camera provides the accuracy, flexibility, and reliability needed to perform your job effectively. It’s more than just a camera; it’s a complete diagnostic solution that enhances your operational efficiency.

Key Features

• High-Resolution Thermal Imaging: Features a 640 x 480 IR resolution for crisp, detailed thermal images that simplify fault identification.
• App-Enabled Functionality: Connects to your smartphone or tablet for real-time viewing, analysis, and data sharing via the FLIR mobile app.
• Cloud Integration: Instantly upload images and data to the cloud for secure storage, team collaboration, and rapid report generation.
• High Thermal Sensitivity: Detects minute temperature differences, enabling precise diagnostics for preventative maintenance and troubleshooting.
• Rugged and Ergonomic Design: Built to endure tough industrial environments with a drop-tested and durable construction.
• Wide Temperature Range: Accurately measures temperatures from -20°C to 550°C, making it suitable for a broad range of industrial applications.
• Versatile Measurement Tools: Includes multiple spot meters, area boxes, and isotherms for in-depth image analysis directly on your mobile device.

The post FLIR i64 Thermal Camera: Pro-Grade Imaging, App Enabled appeared first on rapid-tech.

The FLIR i34 App-Enabled Thermal Camera empowers technicians at any experience level to conduct fast, NFPA 70B-compliant inspections. It improves both asset reliability and safety. Built around the ACE operating system, it delivers a familiar, responsive user experience akin to a smartphone. It includes a full suite of FLIR, third-party, and custom apps for enhanced productivity.

With sharp 240 × 320 IR resolution, an intuitive 5-inch touchscreen, and integrated Wi-Fi/Bluetooth connectivity, the FLIR i34 streamlines every step. From capturing thermal images to cloud sharing and reporting happens seamlessly.

The i34 is engineered to simplify and speed inspection workflows. Customizable applications help reduce manual data entry and improve consistency. This ensures your teams work efficiently in any environment. The platform actively guides less-experienced users, offering built-in training, safety information, and remote support. This raises the quality of inspections across your organization.

Documentation and communications are seamless with direct cloud uploads to FLIR Ignite. It has compatibility with FLIR Assetlink for advanced asset management.

Rugged, portable, and IP54-rated, the FLIR i34 is designed for demanding industrial settings. It addresses key decision-making needs with real-time infrared analytics and time-saving automation. Whether you’re conducting electrical, mechanical, or building inspections, the i34 delivers the actionable intelligence needed to reduce downtime. It ensures compliance and protects equipment investments—all with the backing of trusted FLIR expertise.

Key Features

• 240 × 320 thermal resolution for sharp, detailed imagery
• ACE operating system with app-based workflow customization
• 5” capacitive touchscreen for intuitive operation, even with gloves
• Wi-Fi and Bluetooth connectivity for instant uploads to FLIR Ignite and remote device integration
• NFPA 70B compliance support through robust measurement and analytics features
• Onboard guidance, training, and remote support tools
• IP54 rating for dust and water resistance, built for industrial use

The post FLIR i34 App-Enabled Thermal Camera appeared first on rapid-tech.

Engineered for industrial professionals who demand reliability and precision, this thermal imaging device combines high-resolution infrared sensing with intuitive operation to streamline maintenance workflows and enhance diagnostic accuracy.

Built around a 320×240 infrared detector, the FLIR C8 captures thermal anomalies with exceptional clarity, enabling technicians to identify potential equipment failures before costly downtime occurs.

The compact thermal camera’s 4-inch touchscreen display provides instant visual feedback, whilst the device’s robust construction ensures consistent performance in challenging industrial environments.

Whether conducting electrical inspections, mechanical diagnostics, or HVAC maintenance, the FLIR C8 delivers the thermal intelligence needed to make informed decisions quickly.

Its integrated Wi-Fi connectivity enables seamless data transfer to existing procurement systems, supporting efficient documentation and reporting workflows essential for regulatory compliance and preventive maintenance programmes.

The camera’s temperature measurement range of -10°C to 150°C covers the vast majority of industrial applications, from detecting overheating electrical components to monitoring mechanical bearing temperatures. Advanced MSX technology enhances image detail by overlaying visual light information onto thermal images, providing clearer context for accurate analysis.

For procurement professionals seeking reliable diagnostic equipment, the FLIR C8 offers exceptional value through its combination of professional features, durability, and comprehensive technical support. The device includes detailed datasheets and expert consultation services, ensuring seamless integration into existing maintenance protocols whilst delivering measurable improvements in operational efficiency and equipment reliability.

Key Features

• High-Resolution 320×240 IR Detector – Captures precise thermal data for accurate temperature measurement and fault detection
• 4-inch Colour Touchscreen Display – Provides clear, intuitive interface for field operation and immediate result analysis
• Rugged Industrial Design – Built to withstand harsh conditions with drop-tested durability for reliable daily use
• Integrated Wi-Fi Connectivity – Enables instant data transfer and seamless integration with existing procurement systems
• MSX Technology Enhancement – Overlays visual details onto thermal images for enhanced clarity and better diagnostics
• Wide Temperature Range – Measures from -10°C to 150°C, covering diverse industrial applications and environments
• Comprehensive Technical Support – Includes detailed specifications, expert consultation, and integration assistance

The post FLIR C8 Compact Thermal Imaging Camera | 320×240 pixels High-Resolution appeared first on rapid-tech.

The FLIR TG268 thermal imaging camera helps you go beyond single-spot IR thermometers by allowing you to visualize and measure hot and cold spots with precision.

This advanced tool is ideal for professionals in commercial electrical work, facility maintenance, automotive diagnostics, and HVAC applications.

With its innovative features, the FLIR TG268 minimizes diagnostic time, simplifies repair processes, and ensures your team can share insights efficiently.

Key Features of the FLIR TG268

Accurate Temperature Measurement

The FLIR TG268 offers precise temperature measurements up to 400°C (752°F) with a 24:1 spot size ratio. The integrated bullseye laser pointer ensures easy targeting of specific areas, helping you identify problems quickly and accurately.

Superior Image Quality with MSX® Technology

Equipped with FLIR’s patented MSX® (Multi-Spectral Dynamic Imaging) enhancement, this thermal camera overlays key details from its visible light camera onto thermal images. This real-time enhancement improves image clarity, allowing you to instantly identify heat patterns and faults.

Super Resolution for Extra Detail

The FLIR TG268 uses Super Resolution technology to upscale native thermal images from 160 × 120 to 320 × 240 resolution. This ensures sharper, more detailed images, helping you diagnose issues more effectively and make precise decisions during inspections.

Durable and Reliable in Tough Conditions

Built for rugged environments, the FLIR TG268 is IP54-rated for water and dust resistance and drop-tested to 2 meters. It also includes a built-in LED work light for better visibility in poorly lit areas, ensuring you can work with confidence in any condition.

Enhanced Functionality with FLIR METERLiNK® App

The FLIR TG268 is compatible with the FLIR METERLiNK® app, enabling you to connect up to seven compatible FLIR meters simultaneously. Monitor environmental and electrical conditions in real-time, capture images safely from hazardous areas, and easily share data and reports with your team.

Why Choose the FLIR TG268?

• Efficient Diagnostics: Quickly identify faults with advanced thermal imaging technology.
• Professional-Grade Performance: Perfect for electrical, HVAC, automotive, and facility maintenance applications.
• Durability You Can Trust: Built to withstand tough job site conditions with IP54 protection and a drop-tested design.

The FLIR TG268 24:1 Spot IR Thermal Imaging Camera is your go-to tool for faster, safer, and smarter diagnostics. Whether you’re troubleshooting electrical systems, checking HVAC performance, or inspecting automotive components, this camera delivers the performance and reliability you need.

Upgrade your diagnostic capabilities with the FLIR TG268 today and experience unrivaled thermal imaging quality.

The post FLIR TG268 Thermal Imaging Camera | 24:1 Spot IR, MSX® Enhanced, Super Resolution, Bullseye Laser, Type K Thermocouple, IP54 Rated appeared first on rapid-tech.

Looking for the ideal tool to locate and diagnose a range of electrical, mechanical, and building issues? Your search ends with the FLIR E8 Pro Infrared Camera, the Pro-series tool engineered to deliver precise problem detection. The FLIR E8 Pro enables you to swiftly highlight hot spots and effortlessly identify issues with its vibrant thermal imagery complemented by FLIR’s patented MSX® (Multi-Spectral Dynamic Imaging) enhancement technology.

Every detail matters when it comes to efficient problem-solving, and with the FLIR E8 Pro’s intuitive touchscreen, you can conveniently streamline your inspections. Organize and annotate your photos, add comprehensive notes, and upload everything directly to the FLIR Ignite cloud. With access from any device, your important data is always at your fingertips.

Ready to share your findings and create detailed client reports? FLIR E8 Pro makes it a breeze. Your images and notes are instantly available for your use in FLIR Ignite or FLIR Thermal Studio, ensuring the most efficient and streamlined experience.

Upgrade your inspection and diagnosis process with the FLIR E8 Pro Infrared Camera. Discover the ease of pin-point precision and cloud convenience. Buy now and experience the difference today!

Time-Saving with 1-Touch Level/Span

The 1-Touch Level/Span feature allows users to select a small area of focus in a thermal image. With one touch, the camera auto-adjusts the level and span based on the thermal contrast at that spot, saving valuable time on manual adjustments.

Delivering Efficiency – NFPA 70B Compliant Delta T Measurement Tools

With NFPA 70B compliant Delta T measurement tools now integrated into Ex-Series cameras (Box1 Max – Spot1 Max, and Box1 Max – Atmosphere Temperature), time is saved by calculating ∆T directly on the camera without requiring additional steps.

Streamlined Inspections with Touchscreen Notes

The FLIR Ex-Series boasts a 3.5-inch touchscreen, allowing users to append detailed annotations to images and save them to the cloud, enabling effortless report generation.

Seamless Data Transfer and Collaboration with FLIR Ignite

• Desktop Sync resolves problems caused by damaged or missing SD cards and USB cables, ensuring seamless data transfer and uninterrupted connectivity.
• Secure Data Sharing: Share data securely with your team for easy collaboration and reporting.
• Edit Anywhere: Create reports on mobile devices, on a browser or desktop.

Professional Reports for Customer Satisfaction and Business Development

The right image analysis and reporting software can significantly boost your business by making it easier for your customers to understand the problem and trust in your solutions.

The FLIR Ignite cloud service enables direct image backup to the cloud, file organization and editing, and simple report creation. For advanced editing and reporting, there’s FLIR Thermal Studio Suite: a desktop software offering batch processing, feature-rich measurement tools, and custom reports.

Over-the-Air Updates Ensure Your Camera Stays Up to Date

With Over-the-air (OTA) updates, your FLIR camera remains updated with the latest firmware, bug fixes, and features. When the camera is connected to the internet, it automatically searches for and applies firmware updates.

What are the key differences between the Ex Pro-Series and the Ex-XT?

• FLIR Ignite Cloud connectivity for seamless integration
• Enhanced visual camera resolution of 5 MP for sharper imaging
• Upgraded display resolution (640 x 480) for enhanced clarity
• Expanded display size of 3.5 inches for improved viewing experience
• Sleek touchscreen design for a more modern feel
• Convenient built-in flashlight for added functionality
• Improved User Interface for effortless navigation
• Advanced features like isotherms, Delta T, and 1-Touch level/span
• Easily add text annotations for detailed analysis
• IP54 rating for reliable durability and protection
  

Experience the ultimate in thermal imaging technology with the Ex Pro

The post FLIR E8 Pro Thermal Infrared Camera |- Pro-Series with MSX Enhancement & Ignite Cloud Connectivity – 320 × 240 Thermal Resolution appeared first on rapid-tech.

Introducing the robust FLIR E5 Pro – the Pro-Series Infrared Camera with Ignite™ Cloud connectivity that revolutionizes your building surveys, HVAC inspections, automotive diagnostics, and general electrical and mechanical checkups. This point-and-shoot thermal camera is expertly designed for efficiency and flair, featuring a 160 × 120 thermal resolution. That’s an impressive 19,200 pixels of vibrant thermal imagery, boosted by FLIR’s patented MSX® (Multi-Spectral Dynamic Imaging) enhancement. Simplify your workflow like never before with the E5 Pro’s 3.5-inch, 640 × 480 touchscreen. With this high-tech device, you can edit, organize, and add detailed notes to your photos directly on the camera. Thanks to FLIR Ignite cloud connectivity, you can upload these files for convenient access on any device. Share your thermal images with clients and create quick reports straight from FLIR Ignite. Need advanced reports? The FLIR E5 Pro works seamlessly with FLIR Thermal Studio. Upgrade your inspection game with the FLIR E5 Pro!

Redefining Clarity with MSX® Image Enhancement

All Ex-Series cameras, including the FLIR E6 Pro, are equipped with FLIR’s exclusive Multi Spectral Dynamic Imaging (MSX) technology, delivering key details from the onboard visible light camera to the infrared image in real time. This results in an undiluted thermal image with visible light features, enabling instant recognition of heat problem locations. MSX is real-time, providing immediate results on the camera’s LCD.

 

 

 

 

 

 

 

 

Time-Saving with 1-Touch Level/Span

The 1-Touch Level/Span feature allows users to select a small area of focus in a thermal image. With one touch, the camera auto-adjusts the level and span based on the thermal contrast at that spot, saving valuable time on manual adjustments.

Delivering Efficiency – NFPA 70B Compliant Delta T Measurement Tools

With NFPA 70B compliant Delta T measurement tools now integrated into Ex-Series cameras (Box1 Max – Spot1 Max, and Box1 Max – Atmosphere Temperature), time is saved by calculating ∆T directly on the camera without requiring additional steps.

Streamlined Inspections with Touchscreen Notes

The FLIR Ex-Series boasts a 3.5-inch touchscreen, allowing users to append detailed annotations to images and save them to the cloud, enabling effortless report generation.

Seamless Data Transfer and Collaboration with FLIR Ignite

• Desktop Sync resolves problems caused by damaged or missing SD cards and USB cables, ensuring seamless data transfer and uninterrupted connectivity.
• Secure Data Sharing: Share data securely with your team for easy collaboration and reporting.
• Edit Anywhere: Create reports on mobile devices, on a browser or desktop.

Professional Reports for Customer Satisfaction and Business Development

The right image analysis and reporting software can significantly boost your business by making it easier for your customers to understand the problem and trust in your solutions.

The FLIR Ignite cloud service enables direct image backup to the cloud, file organization and editing, and simple report creation. For advanced editing and reporting, there’s FLIR Thermal Studio Suite: a desktop software offering batch processing, feature-rich measurement tools, and custom reports.

Over-the-Air Updates Ensure Your Camera Stays Up to Date

With Over-the-air (OTA) updates, your FLIR camera remains updated with the latest firmware, bug fixes, and features. When the camera is connected to the internet, it automatically searches for and applies firmware updates.

What are the key differences between the Ex Pro-Series and the Ex-XT?

• FLIR Ignite Cloud connectivity for seamless integration
• Enhanced visual camera resolution of 5 MP for sharper imaging
• Upgraded display resolution (640 x 480) for enhanced clarity
• Expanded display size of 3.5 inches for improved viewing experience
• Sleek touchscreen design for a more modern feel
• Convenient built-in flashlight for added functionality
• Improved User Interface for effortless navigation
• Advanced features like isotherms, Delta T, and 1-Touch level/span
• Easily add text annotations for detailed analysis
• IP54 rating for reliable durability and protection
  

Experience the ultimate in thermal imaging technology with the Ex Pro

The post FLIR E5 Pro Thermal Infrared Camera |- Pro-Series with MSX Enhancement & Ignite Cloud Connectivity – 160 × 120 Thermal Resolution appeared first on rapid-tech.

Experience robust efficiency with the FLIR E6 Pro, the cutting-edge thermal camera designed for precise problem detection. With 240 × 180 thermal resolution, this handheld camera captures 43,200 pixels, producing vibrant thermal imagery made possible by FLIR’s patented MSX® (Multi-Spectral Dynamic Imaging) enhancement. The E6 Pro comes with a 3.5-inch touchscreen of 640 × 480 resolution, making it an ideal gadget for streamlining your image editing, organizing, and note-adding workflow. Access your files from any device with FLIR Ignite cloud, which facilitates effortless uploading directly from the camera. Quick report creation is made seamless with FLIR Ignite and FLIR Thermal Studio.

Redefining Clarity with MSX® Image Enhancement

All Ex-Series cameras, including the FLIR E6 Pro, are equipped with FLIR’s exclusive Multi Spectral Dynamic Imaging (MSX) technology, delivering key details from the onboard visible light camera to the infrared image in real time. This results in an undiluted thermal image with visible light features, enabling instant recognition of heat problem locations. MSX is real-time, providing immediate results on the camera’s LCD.

 

 

 

 

 

 

 

 

Time-Saving with 1-Touch Level/Span

The 1-Touch Level/Span feature allows users to select a small area of focus in a thermal image. With one touch, the camera auto-adjusts the level and span based on the thermal contrast at that spot, saving valuable time on manual adjustments.

Delivering Efficiency – NFPA 70B Compliant Delta T Measurement Tools

With NFPA 70B compliant Delta T measurement tools now integrated into Ex-Series cameras, time is saved by calculating ∆T directly on the camera without requiring additional steps.

Streamlined Inspections with Touchscreen Notes

The FLIR Ex-Series boasts a 3.5-inch touchscreen, allowing users to append detailed annotations to images and save them to the cloud, enabling effortless report generation.

Seamless Data Transfer and Collaboration with FLIR Ignite

• Desktop Sync resolves problems caused by damaged or missing SD cards and USB cables, ensuring seamless data transfer and uninterrupted connectivity.
• Secure Data Sharing: Share data securely with your team for easy collaboration and reporting.
• Edit Anywhere: Create reports on mobile devices, on a browser or desktop.

Professional Reports for Customer Satisfaction and Business Development

The right image analysis and reporting software can significantly boost your business by making it easier for your customers to understand the problem and trust in your solutions.

The FLIR Ignite cloud service enables direct image backup to the cloud, file organization and editing, and simple report creation. For advanced editing and reporting, there’s FLIR Thermal Studio Suite: a desktop software offering batch processing, feature-rich measurement tools, and custom reports.

Over-the-Air Updates Ensure Your Camera Stays Up to Date

With Over-the-air (OTA) updates, your FLIR camera remains updated with the latest firmware, bug fixes, and features. When the camera is connected to the internet, it automatically searches for and applies firmware updates.

What are the key differences between the Ex Pro-Series and the Ex-XT?

• FLIR Ignite Cloud connectivity for seamless integration
• Enhanced visual camera resolution of 5 MP for sharper imaging
• Upgraded display resolution (640 x 480) for enhanced clarity
• Expanded display size of 3.5 inches for improved viewing experience
• Sleek touchscreen design for a more modern feel
• Convenient built-in flashlight for added functionality
• Improved User Interface for effortless navigation
• Advanced features like isotherms, Delta T, and 1-Touch level/span
• Easily add text annotations for detailed analysis
• IP54 rating for reliable durability and protection
  

Experience the ultimate in thermal imaging technology with the Ex Pro

The post FLIR E6 Pro Thermal Infrared Camera |- Pro-Series with MSX Enhancement & Ignite Cloud Connectivity – 240 × 180 Thermal Resolution appeared first on rapid-tech.