Stop Fighting Unstable Pressure During Critical Calibrations

You’re on-site calibrating pressure transmitters, and your traditional hand pump is making you work twice as hard. You’re pumping frantically to reach 30 bar, the pressure keeps drifting, and you’re burning valuable time trying to maintain stability long enough to record a reading. Meanwhile, your client’s production team is waiting for you to finish, and you’re questioning whether your calibration certificate will hold up under scrutiny.

The Additel ADT992 Handheld Pneumatic Pressure Pump eliminates this frustration. Designed specifically for field calibration professionals, this pump delivers consistent pressure generation from 95% vacuum to 700 psi (50 bar) – covering the vast majority of industrial pneumatic calibration requirements across Australian HVAC, compressed air, and process instrumentation applications.

Dual-Stage Engineering: Work Smarter, Not Harder

The ADT992’s dual-stage piston design fundamentally changes how you approach pressure calibration. The pre-pressure piston rapidly builds bulk pressure with minimal physical effort – you’ll reach 40 bar faster than with conventional hand pumps, without the arm fatigue. Once you’re approaching your target pressure, the fine adjustment screw (7.2 ml volume capacity) provides precise control for hitting exact calibration points.

Each lever stroke delivers a +30 psi (2 bar) boost, giving you predictable, controlled pressure increases. The 10 Pa (0.1 mbar) adjustment resolution means you can dial in precise pressure values required for tight-tolerance calibrations. This isn’t just convenient – it’s the difference between completing 10 calibrations per day versus 6, and arriving home without exhausted forearms.

Built-In Vacuum Capability: One Pump, Complete Pressure Range

Unlike basic pressure-only hand pumps, the ADT992 generates vacuum down to 95% (approximately -950 mbar), making it genuinely versatile for calibration technicians who work with both positive pressure and vacuum instruments. Calibrating vacuum switches, negative pressure transmitters, or differential pressure devices no longer requires carrying separate equipment.

The minimum pre-pressure of 600 psi (40 bar) means you can efficiently generate high pressures without excessive pumping cycles, while the 35 ml maximum load volume provides the capacity needed for testing larger-volume pressure systems without constant re-pumping.

Multi-Position Versatility: Designed for Real Job Sites, Not Just Lab Benches

Australian trade professionals work in cramped plant rooms, alongside running machinery, on elevated platforms, and in confined spaces where traditional hand pumps become awkward or impossible to operate effectively. Additel engineered the ADT992 with this reality in mind.

The adjustable reference port and dual rubber grips enable horizontal, vertical, or tilted operation – whatever orientation suits your specific installation. Calibrating a wall-mounted pressure transmitter at head height? Work vertically. Testing equipment on a workbench? Operate horizontally. Awkward installation in a tight mechanical room? Adjust the pump to whatever position gives you access.

At just 1.6 kg (3.5 lbs) and measuring 320mm x 110mm x 122mm (base x width x height), the ADT992 fits in your toolkit alongside multimeters and clamp meters, not in a separate bulky case that stays in the van.

Integrated Filtration Protects Your Calibration Standards

The ADT992 includes built-in port filters that protect both your pump and your precision calibration instruments:

• Standard port: 150μm quick-removal filter prevents contamination entering your reference gauge or calibrator
• Pump air intake port: 100μm quick-removal filter protects internal components from dust and debris
• Pressure outlet: 150μm quick-release filter ensures clean pressure delivery to your device under test

These filters are critical when working in dusty industrial environments, mining facilities, or outdoor installations where airborne contamination would otherwise compromise measurement accuracy or damage sensitive instruments. The quick-removal design means you can clean or replace filters on-site without tools.

Hand-Tight Quick Connectors: Faster Workflows, No Tools Required

Every model includes the ADT100-X-FNG female quick connector for your device under test (DUT), with configurations available in 1/4NPT, 1/2NPT, 1/4BSP, 1/2BSP, or M20X1.5 to match your specific equipment. The hand-tight design means you can swap between different instruments without reaching for spanners – critical when you’re rotating through multiple calibration points or testing several devices in succession.

When you’re working through a calibration schedule with 15 pressure transmitters to verify, these seconds per connection add up to significant time savings across your day.

Materials and Construction: Built for Australian Industrial Environments

The ADT992 uses stainless steel ram/adapters and a combination SS/aluminium body construction with Buna-N, PTFE, and Copper Alloy seals – materials selected for durability, chemical resistance, and reliable performance across diverse Australian conditions.

Whether you’re working in tropical Queensland humidity, dry inland mining facilities, coastal industrial plants with salt air, or temperature-controlled metropolitan facilities, the custom-machined components maintain leak-free operation. The robust construction withstands the inevitable knocks from being transported between sites, dropped in toolboxes, or used on vibrating equipment platforms.

Applications Across Australian Industrial and Trade Sectors

HVAC & Refrigeration Technicians: Verify pressure switches on commercial HVAC systems, test refrigeration gauges, calibrate building automation pressure sensors. The vacuum capability handles negative pressure differential switches common in HVAC applications.

Industrial Maintenance Teams: Routine calibration of pneumatic pressure transmitters, compressed air gauges, process control instruments, and safety devices. The multi-position capability handles installations in machinery bays, overhead piping, or confined equipment rooms.

Calibration Technicians: On-site verification services, field calibrations, and workshop instrument testing up to 50 bar. Pair with your Additel pressure calibrator or reference gauge for complete NATA-traceable pressure calibration capability.

Compressed Air System Specialists: Testing and verification of compressor pressure switches, airline pressure gauges, and pneumatic control equipment across manufacturing facilities, workshops, and industrial plants.

Instrumentation Engineers: Commissioning new pressure instruments, verifying process control transmitters, and maintaining measurement accuracy for compliance reporting. The stable pressure generation and fine adjustment support precise calibration procedures required for audit documentation.

Test & Measurement Professionals: Pressure instrument audits, pre-calibration checks, equipment verification, and compliance testing for quality management systems. The 1-year warranty and available maintenance kit support long-term accuracy and reliability.

What’s Actually Included: Complete Calibration Kit

The ADT992 arrives ready for professional calibration work:

• ADT992 handheld pneumatic pressure pump with your selected pressure port type
• Female quick connector for DUT connection (specified by your port configuration)
• 20 x O-rings for maintenance and seal replacement
• Flexible pressure hose (maximum pressure rating: 630 bar)
• Built-in port filters (standard port, pump intake, pressure outlet)

ADT992-X-SET models additionally include a carrying case for protected transport between job sites.

Optional Accessories for Extended Capability

ADT102 Adapter Set: 25-piece kit with 1/4NPT male adapters to various male and female connections – covers the majority of pressure instrument fittings you’ll encounter across different manufacturers.

ADT103 Quick Connector Set: 10-piece kit with hand-tight quick connectors in multiple configurations (1/2NPT, 1/4BSP, 1/2BSP, M20X1.5) – enables rapid connection to diverse pressure equipment without thread compatibility concerns.

9901-992 Carrying Case: Protective case for one ADT992 pump – safeguards your equipment during transport and provides organized storage.

ADT992/993-MK Maintenance Kit: Replacement seals, O-rings, and service components for long-term pump maintenance – maintains performance and extends operational life.

Model Selection Guide: Choose Your Pressure Port Configuration

The ADT992 is available with different pressure port types to match your existing equipment and regional standards:

• ADT992-N: 1/4NPT female port (common in Australia, North America)
• ADT992-N2: 1/2NPT female port (larger bore for higher flow applications)
• ADT992-B: 1/4BSP female port (British Standard Pipe, common in older Australian industrial equipment)
• ADT992-B2: 1/2BSP female port
• ADT992-M: M20X1.5 female port (metric thread, common in European-manufactured equipment)

If you work across facilities with mixed equipment standards, consider the ADT103 quick connector accessory set for maximum versatility.

Australian Supply with Calibration Support

We understand Australian calibration professionals need more than just equipment – you need traceable certification, responsive support, and confidence that your tools meet compliance requirements. Our Australian stock ensures fast delivery, while our calibration capabilities provide NATA-traceable certification when required for your quality management systems.

Whether you’re maintaining instruments to AS 2593 (boiler pressure vessel standards), supporting AS/NZS 3788 (pressure equipment compliance), or documenting calibrations for ISO 9001 quality systems, we understand the certification and traceability requirements Australian professionals face.

Why Choose the Additel ADT992?

Efficiency: Dual-stage design with lever pressurization generates pressure 40% faster than conventional hand pumps with significantly less physical effort.

Versatility: 95% vacuum to 700 psi (50 bar) range covers pneumatic transmitters, compressed air gauges, HVAC pressure switches, vacuum instruments, and general industrial pressure calibration requirements.

Precision: 10 Pa (0.1 mbar) adjustment resolution with 7.2 ml fine adjustment volume enables exact calibration point targeting.

Stability: Lever mechanism provides superior pressure stability compared to screw-type hand pumps – critical for recording accurate calibration readings.

Portability: 1.6 kg weight and compact dimensions suit daily field use without toolkit bulk or transport hassles.

Durability: Stainless steel and aluminium construction with engineered seals ensures leak-free operation across diverse Australian industrial environments.

Protection: Integrated 100-150μm port filters protect both your calibration standards and the pump from contamination damage.

Flexibility: Multi-position operation (horizontal, vertical, tilted) handles real-world installation constraints and confined workspace limitations.

Ready for Professional-Grade Pressure Calibration?

Whether you’re conducting routine instrument verifications, commissioning new pressure equipment, or maintaining critical process instrumentation, the Additel ADT992 delivers the portable pressure generation capability modern calibration work demands. Fast pressure generation, precise control, genuine vacuum capability, and the reliability Australian trade professionals expect – backed by local stock and calibration support.

Technical Specifications

Note: Specifications based on Additel manufacturer documentation. Confirm requirements for critical applications.

The post Additel ADT992 Pneumatic Pressure Pump | 50 Bar Calibration appeared first on rapid-tech.

The Growing Challenge of Power Quality in Modern Electrical Systems

Australia’s electrical infrastructure is undergoing rapid transformation. The proliferation of variable speed drives, LED lighting, solar inverters, EV charging stations, and data centre equipment has fundamentally changed the nature of electrical loads across commercial and industrial facilities.

These non-linear loads generate harmonic distortion, voltage fluctuations, and transient events that compromise equipment performance, increase energy costs, and create compliance headaches.

For Australian electrical contractors and facility managers, the consequences of poor power quality are increasingly severe: premature equipment failures, unexplained downtime, nuisance tripping, overheating transformers, and costly energy wastage. Yet identifying the root cause requires instrumentation that meets international standards while remaining practical for field deployment.

Traditional power quality analysers often struggle to balance the competing demands of certified accuracy, comprehensive data capture, and usable interfaces that don’t require a PhD to operate.

Introducing the Metrel MI-2992: Where Certified Accuracy Meets Intuitive Operation

The Metrel MI-2992 Power Quality Analyser represents a fundamental rethinking of what a professional PQA should deliver. Built on an Android-based platform, this instrument combines the certified measurement accuracy that power quality standards demand with the responsive, intuitive interface that modern trade professionals expect.

The expansive 10.1-inch colour touchscreen transforms complex power quality data into immediately actionable insights, whether you’re standing in a switchroom troubleshooting voltage sags or conducting a week-long EN 50160 compliance survey.

Full compliance with IEC 61000-4-30 Edition 3.0 Class A ensures your measurements meet the highest international accuracy standards, while the step-by-step setup wizard means even operators new to power quality analysis can configure professional-grade monitoring campaigns within minutes.

The instrument supports simultaneous capture of events, inrush currents, transients, RVCs, alarms, and signalling analysis, providing the comprehensive dataset needed to diagnose even the most complex power quality issues.

Key Benefits for Australian Electrical Professionals

• Class A Certified Accuracy You Can Defend: Every measurement meets IEC 61000-4-30 Class A requirements, the gold standard for power quality instrumentation. This isn’t a compromise instrument that approximates results—it’s a fully certified analyser that produces data suitable for contractual disputes, regulatory compliance, and professional engineering reports. When a client questions your findings or a network operator challenges your measurements, Class A certification provides the defensible accuracy that protects your professional reputation.
• Comprehensive Harmonics Analysis: The MI-2992 captures harmonic components up to the 63rd order, providing visibility into the full spectrum of harmonic distortion affecting modern electrical systems. But the instrument goes further, measuring supraharmonics in the 2.1 to 14.9 kHz range with 200 Hz resolution. This capability is increasingly critical as switching power supplies, LED drivers, and solar inverters generate high-frequency emissions that traditional analysers miss entirely.
• Flexible Recording for Every Application: Recording intervals span from 200 milliseconds for capturing fast transient events to 2 hours for long-term trend analysis, with user-selectable averaging options including avg, min, max, and avgon. Predefined recorder profiles for EN 50160, IEEE 519, Codigo de Red, and other international standards eliminate guesswork, while custom profiles allow tailoring to specific client requirements.
• True Portable Operation: The built-in Li-Ion battery ensures continued operation during power outages—essential when monitoring unstable supplies—while the wide-range power supply (85-500 VAC) allows direct connection to virtually any electrical system. At 2.5 kg with dimensions of 320 × 230 × 60 mm, the MI-2992 strikes the optimal balance between screen real estate and field portability.
• Future-Ready Connectivity: USB Type-C, Gigabit Ethernet, Wi-Fi 802.11 ac/a/b/g/n, and Bluetooth 4.2/BLE provide connectivity options for any environment. NTP time synchronisation ensures accurate event correlation across multiple instruments, while VNC remote access allows full instrument control from any networked computer—monitor your recording campaign from the comfort of your office or respond to alarm conditions without travelling to site.

Applications Across Australian Industries

• Commercial and Industrial Facilities: Investigate power quality issues affecting sensitive manufacturing equipment, identify harmonic sources contributing to transformer overheating, and document baseline power quality for contractual handover of new installations. The four-channel voltage and current measurement capability handles single-phase through to four-wire three-phase systems with full support for open delta and other configurations.
• Solar and Renewable Energy: Commission grid-connected solar installations with documented power quality verification, investigate inverter-related harmonic issues, and monitor long-term performance against network connection agreements. Direct support for 1500 VDC systems via the optional S 2149 attenuator addresses the growing market for high-voltage solar installations.
• Healthcare and Critical Facilities: Verify power quality in hospital IT systems and operating theatres where power disturbances can have life-safety implications. Monitor UPS performance and confirm switchover characteristics meet design specifications. Document power quality for AS/NZS 3003 medical electrical installation compliance.
• Network and Utility Applications: Conduct EN 50160 compliance surveys for network operators, investigate customer complaints about supply quality, and document power quality at connection points. GPS time synchronisation via optional accessory ensures measurements can be precisely correlated with network events.
• Variable Frequency Drive Systems: The VFD mode supporting 5 Hz to 120 Hz system frequencies addresses the specialised requirements of motor drive applications, enabling power quality analysis on the output of variable frequency drives where traditional analysers cannot operate.

The post Metrel MI-2992 Class A Power Quality Analyser | IEC 61000-4-30 appeared first on rapid-tech.

Electric and hybrid vehicle repairs are entering every Australian workshop, but diagnosing motor-generator unit failures remains expensive guesswork. OEM diagnostics point to fault codes without confirming whether the issue sits in the MGU, power inverter module, or elsewhere in the drivetrain. Misdiagnosis means wasted hours and parts bills running into thousands—with no guarantee you’ve fixed the actual problem. Meanwhile, customers expect faster turnaround than traditional mechanical repairs, and MGU replacement costs demand absolute certainty before committing to the repair.

You need definitive answers on motor health without tearing down the entire drivetrain or sending vehicles out for specialist diagnosis.

Your Complete EV Motor Diagnostic Solution

The ALL-TEST PRO 34 EV transforms how Australian workshops handle electric vehicle motor diagnostics. This purpose-built tester is the only handheld instrument specifically engineered for permanent magnet motors and generators in hybrid and electric vehicles—giving you comprehensive motor health analysis in under three minutes.

Unlike improvised testing methods or generic motor testers, the 34 EV evaluates every critical component: stator windings, rotor magnets, contamination levels, ground faults, and connection integrity. You’re testing the complete electrical circuit of the MGU without rotating the motor, energizing high-voltage systems, or disconnecting the drivetrain. That means diagnosis happens safely in your service bay with the HV system disabled—no road testing, no complex teardown, just clear answers on motor condition.

The patented Motor Circuit Analysis (MCA) technology performs deenergized testing that reveals developing faults long before catastrophic failure. You’re catching winding deterioration, rotor magnet degradation, and contamination issues at stages where they’re still repairable—or confirming with confidence that an MGU has reached end-of-life and requires replacement.

How It Delivers Results Australian Workshops Need

Static Testing for Baseline Motor Health The static test measures five critical parameters: resistance, inductance, impedance, capacitance, and phase angle across all three phases. These measurements feed into the proprietary Test Value Static (TVS) algorithm—a single numerical indicator of overall motor health. You compare this TVS value against baseline data (either from previous tests or reference values for that vehicle model) to instantly spot drift from normal operating condition. Changes in TVS flag developing problems in stator windings or rotor magnets before they show up as performance issues or trigger fault codes.

Static testing requires zero rotor movement, which means you’re diagnosing motors that are locked, seized, or mechanically disconnected—situations where traditional testing methods fail completely.

Dynamic Testing for Detailed Fault Analysis When static results indicate potential issues—or when establishing initial baselines—the dynamic test provides deeper diagnostic insight. By manually rotating the motor shaft through its range, the 34 EV captures real-time measurements that reveal specific fault signatures. The instrument analyzes this data and delivers clear Pass/Warning/Fail indicators for resistance balance, stator condition, rotor integrity, and contamination levels.

Dynamic testing identifies which specific component is degrading, so you’re not replacing entire assemblies when a targeted repair might solve the problem. For incoming used EVs or post-repair verification, dynamic tests confirm motor condition before customer handover.

Insulation Testing That Matters Integrated megohmmeter functionality tests insulation resistance at both 500V and 1000V, reading up to 999 megohms. This catches ground fault development and insulation breakdown that compromise motor safety and performance—critical for high-voltage systems where insulation failure can be catastrophic. You’re conducting proper dielectric testing without carrying separate megohmmeters or risking equipment that wasn’t designed for EV voltage levels.

Built for Real Workshop Conditions

The 34 EV handles the reality of Australian automotive work. The rugged handheld design fits in your toolbox and survives the knocks of daily workshop life. The full-colour touchscreen remains readable in bright workshop lighting and guides you through testing with on-screen step-by-step instructions—no hunting through manuals or memorizing complex procedures.

Battery power means you’re testing vehicles anywhere in the workshop or out in customers’ driveways without hunting for power points. The intuitive interface gets new technicians conducting accurate tests within minutes, while experienced diagnostic techs appreciate the depth of data available for complex fault analysis.

Results display instantly on a single screen with clear health indicators. You’re showing customers exactly what’s wrong with their MGU using concrete test data rather than educated guesses based on fault codes. That transparency builds trust and justifies repair costs when customers understand they’re replacing genuinely failed components.

Applications Across Your EV Service Work

Pre-Purchase Inspections Used EV buyers increasingly request independent motor health verification before committing to purchase. The 34 EV delivers objective motor condition assessment that protects buyers from expensive surprises—and positions your workshop as the go-to facility for comprehensive EV pre-purchase inspections. Test the MGU health in minutes and provide documented evidence of motor condition.

Fault Diagnosis & Repair Verification When hybrid or EV customers arrive with reduced power, unusual noises, or performance issues, you need to isolate whether the problem originates in the motor, inverter, or elsewhere. The 34 EV definitively confirms motor health or identifies specific faults—ending the expensive trial-and-error of replacing components until symptoms resolve. Post-repair testing verifies that replacement MGUs or rebuilt motors meet specification before reinstallation.

Fleet Preventative Maintenance Fleet operators managing hybrid or electric vehicles need predictive maintenance programs that prevent roadside failures. Regular 34 EV testing establishes trending data for each vehicle’s MGU, flagging developing issues during scheduled services rather than after breakdown. You’re offering fleet customers genuine condition-based maintenance rather than time-based replacement guesswork.

Workshop Equipment & Tool Testing Automotive training facilities and technical colleges teaching EV technology need reliable diagnostic equipment that trains students on industry-standard testing methods. The 34 EV’s guided interface and comprehensive testing capabilities make it ideal for educational environments while delivering professional-grade results.

Technical Capabilities for Australian Conditions

Tests three-phase permanent magnet motors and generators in vehicles under 1000V—covering virtually every hybrid and EV entering Australian workshops from Prius to Tesla. The instrument handles extreme ambient temperatures found in Australian service bays without requiring climate control or special storage.

The patented TVS technology eliminates rotor position dependency, meaning you get accurate results regardless of where the motor sits in its rotation—critical when testing motors that won’t rotate freely or are mechanically locked. This makes the 34 EV uniquely capable of diagnosing motors that other methods can’t test at all.

Optional PC software extends capabilities for workshops managing multiple test records, generating customer reports, or conducting detailed analysis of motor trends over time. The software imports test data for archiving, comparison, and professional documentation that supports warranty claims or insurance assessments.

APPLICATIONS & USE CASES

Automotive Workshops Expand your hybrid and EV service capabilities with definitive motor diagnostics. Test MGU health during routine services, diagnose performance complaints, and verify repair quality before customer handover. Build reputation as the local EV specialist with objective motor testing capabilities.

Mobile Mechanics & Roadside Service Diagnose EV motor faults on-site without towing vehicles to facilities with specialized equipment. The portable 34 EV delivers workshop-quality results in customers’ driveways—perfect for pre-purchase inspections or breakdown diagnosis where vehicle mobility is limited.

Fleet Maintenance Operations Implement condition-based maintenance for hybrid and electric fleet vehicles. Regular MGU testing identifies degrading motors during scheduled services, preventing costly roadside failures and optimizing replacement timing based on actual component condition rather than guesswork.

Automotive Training & Education Train the next generation of automotive technicians on proper EV motor diagnostic procedures. The 34 EV’s intuitive interface and comprehensive testing capabilities teach industry-standard methods while delivering professional results students can trust.

Used EV Inspection Services Offer independent motor health certification for used EV transactions. Buyers increasingly demand professional motor assessment before purchase—positioning your business to capture this growing inspection market with documented MGU condition reporting.

The post ALL-TEST PRO 34 EV Motor Tester | Electric Vehicle Diagnostics appeared first on rapid-tech.

Features

• Reporting Done In Seconds – Connected workflows automate the reporting that used to eat up to half the job, so you can focus on the inspection, not the paperwork.
• Anyone Can Be An Expert – Intuitive, app-guided capture and on-device onboarding help less-experienced staff deliver expert-level results, reliably.
• See it. Share it. Now – 480 x 640 clarity plus built-in LTE for sharp insights and real-time collaboration from anywhere – secured to ISO 27001 standards.

Main Applications

• Electrical and mechanical inspections across industrial and utility environments, enabling early fault detection and reduced downtime.
• Enterprise-level condition monitoring programs with asset hierarchy, cloud-based data management, and team-wide collaboration.
• Building diagnostics and facility maintenance, including moisture detection, HVAC performance checks, and energy loss assessments.

The post FLIR i65 App-Enabled Thermal Camera with LTE (480 x 640) appeared first on rapid-tech.

Optimize your machinery with our entry-level laser shaft alignment system, tailored specifically for horizontal machines. Simple, precise, and easy to use, it’s the perfect tool for basic machine alignment and routine maintenance, ensuring efficient and reliable operation without the complexity of advanced systems.

Features That Make Alignment Easier and Accurate

Our laser shaft alignment system combines groundbreaking features and user-focused design to ensure high precision and convenience:

• Wireless Transducers
  The system includes wireless transducers with digital inclinometers, eliminating cable constraints and allowing seamless operation.
• High-Resolution CCD Detector
  Equipped with a 30mm CCD detector featuring 0.001mm resolution and a laser emitter, it ensures accurate measurements with unmatched stability.
• Soft Foot Checker & Thermal Growth Compensation
  These features simplify alignment even under challenging conditions, minimizing downtime and maximizing machine efficiency.
• Embedded Cameras for Advanced Monitoring
  • FLIR Lepton Infrared Thermal Camera: A 160×120 px thermal camera helps you detect temperature changes, critical in identifying potential issues.
  • 5MP Visible Camera: Capture high-quality images for detailed analysis and reporting.
• Real-Time Monitoring Options
  • LIVE Mode: Perfect for horizontal machines, this mode facilitates real-time corrections.
  • Shim Calculation: Simplifies vertical machine corrections with instant shim calculations.
• Customizable Reporting
  Create detailed alignment reports, complete with machine photos. The system supports USB output, making it easy to share and archive data.

Optional Vibration Analysis Program for Predictive Maintenance

Take equipment monitoring to the next level with the optional VSHOOTER+® vibration analysis program. This feature includes a wired ICP magnet vibration sensor and offers:

• Machine Condition Picture (MCP) at a glance for quick diagnostics.
• AUTO Analysis for detecting unbalance, misalignment, looseness, bearing lubrication issues, and shocks.
• Comprehensive data including FFT spectrum, trend curves, and time signals for a deeper understanding of machine conditions.
• Stereo headphone output for listening to mechanical noises during assessments.

Technical Specifications

• Portability & Build
  Compact and durable with an IP54-rated handheld device. Weighs 4.5kg with the case, making it convenient to carry.
• Touchscreen Display
  A 5.7” touchscreen (640×480 px) offers a user-friendly interface for effortless operation.
• Powerful Battery
  Comes with a 6-hour rechargeable Li-Ion battery.
• Memory Space
  1000-file storage capacity with micro USB output for hassle-free data transfer.

Why Choose Our Laser Shaft Alignment System?

• Unmatched Precision: High-resolution detectors and digital inclinometers ensure precise results.
• Ease of Use: Wireless technology, customizable features, and intuitive software make alignment straightforward.
• Cost-Efficiency: By identifying and correcting problems early, you save on repairs and reduce equipment downtime.
• Future-Forward Technology: Thermal and visible cameras, vibration analysis, and advanced firmware position your maintenance tasks at the cutting edge of technology.

Order Your Laser Shaft Alignment System Today!

Optimize your machinery, reduce downtime, and enhance productivity with the most reliable laser shaft alignment system on the market. Perfect for industries requiring high-precision tools, such as manufacturing, power plants, and engineering workshops.

The post Synergy Tech ASHOOTER+ Laser Shaft Alignment System | Precision Tool for Horizontal Machines with Wireless Transducers, Thermal Camera, and Vibration Analysis Option appeared first on rapid-tech.

Discover the cutting-edge efficiency of the Wavecom TnT Titan DT Kit – the comprehensive Portable Appliance Test & Print kit designed to simplify and enhance your testing experience. Proudly designed and manufactured in Australia, this robust kit sets a new benchmark in reliability and functionality for industry professionals.

Wavecom TnT Titan Series Models

Unparalleled Testing Performance

Experience a full spectrum of AS/NZS 3760:2022 tests with the TnT Titan. From Class 1 and Class 2 to Extension Lead, RCD, and Leakage testing, this device offers straightforward procedures aided by intuitive LED indicators. The result? Effortless yet precise testing, ensuring compliance and safety across the board.

All-Inclusive Kit with Advanced Tag Printing

The TnT Titan DT Kit is more than just a tester; it’s a complete solution with a direct thermal tag printer. Seamlessly print test tags wirelessly via the new WinPATS App, empowering you to label appliances instantly and clearly. This wearable device, sleek and lightweight, attaches effortlessly to your belt, enabling hands-free operation. Ideal for professionals on the move, the tag printer is engineered to simplify your workflow, eliminating the hassle of handwritten tags.

Superior Connectivity and Data Management

Harness the power of modern connectivity with the TnT Titan’s integration with the WinPATS App. Employ your 4G-ready tablet to manage testing remotely via Bluetooth for optimal flexibility. The advanced data system ensures your test results are automatically backed up to a secure AWS web server, safeguarding all your vital information. Every kit includes a 3-month WinPATS Cloud Storage & Support Plan, featuring enhanced data security and user support.

Non-Stop Testing Capabilities

With a high-capacity lithium-ion battery, the TnT Titan guarantees up to 3000 complete test cycles on a single charge, providing exceptional efficiency and independence from power outlets. This design allows uninterrupted testing throughout an entire working day, making it an invaluable tool for busy professionals.

Exceptional Portability and Design

Designed with ease of transport in mind, the TnT Titan is equipped with rubberized grips and a detachable carry strap. Customize the strap for comfortable carrying or handling during testing, freeing your hands for other tasks. The deluxe carry bag, included with the kit, offers practical storage with its ample pockets that house all essential tools, from test leads to tablets.

Durable and Long-Lasting Construction

Constructed to withstand demanding conditions, this Australian-made product meets some of the world’s most stringent testing standards, offering a 3-year conditional warranty. With a built-in isolation transformer for portable RCD testing, the TnT Titan DT Kit is as durable as it is innovative.

Precision and Ease with Bluetooth Laser Scanner

Complete your suite with the included Cipherlab Bluetooth Barcode Scanner. Gain immediate access to test results, item data, and testing schedules by scanning WinPATS generated barcodes, streamlining your testing operations like never before.

Choose the Wavecom TnT Titan DT Kit for an unprecedented combination of versatility, convenience, and precision in portable appliance testing, backed by dependable Australian engineering and support. Embrace this leap in testing technology and streamline your test and tagging needs today.

The post Wavecom TnT Titan DT Kit – Ultimate Australian Portable Appliance Testing & Tag Printing Solution with Bluetooth and Cloud Storage appeared first on rapid-tech.

The Fluke ii905 Acoustic Imager with cutting-edge LeakQ™ technology is an essential tool for professionals seeking efficient and accurate gas and vacuum leak detection.

Whether managing complex industrial pipelines or routine maintenance of compressed air systems, this advanced acoustic imager provides the insights needed to enhance operational efficiency and reduce costly energy waste.

Experience unparalleled ease-of-use with its intuitive interface equipped with a large 7″ LCD touchscreen that overlays a SoundMap™ onto real-world imagery, ensuring precise leak identification.

Key Features

• Ease of Use and Quick Setup: With its ergonomic design and ready-to-use capabilities, the Fluke ii905 ensures that even new users can begin detecting leaks in minutes. Simplify your day-to-day operations and tackle leak detection with confidence.
• SoundMap™ Technology: The advanced SoundMap™ feature offers a visual overlay on the LCD screen, aiding users in rapidly pinpointing leak locations with precision. It isolates leak-specific sound frequencies while filtering out irrelevant background noise, enhancing detection accuracy.
• LeakQ™ Leak Insight: Gain immediate insight with LeakQ™, which not only detects and assesses leaks but also estimates the leak size and financial impact. The automatic distance estimation and comprehensive LeakQ severity index guide prioritization of repair tasks for optimal energy savings.
• Intelligent Tagging and Reporting: Enrich your data with visual- and textual tags and organize findings effectively. Comprehensive reporting functions facilitate seamless collaboration with team members and repair teams.

Economic Impact

Investing in the Fluke ii905 directly influences your bottom line by identifying leaks that could lead to significant energy waste. For instance, a 100 hp air compressor can incur around $50,000 annually in electricity costs, with up to 30% potentially lost to undetected leaks.

Utilizing the Fluke ii905 not only supports environmental sustainability but also maximizes energy efficiency, leading to substantial annual savings.

Customizable Reporting with LeakQ™

Fluke ii905 elevates your maintenance strategy by integrating robust reporting tools with the LeakQ online reporting tool. This localized PC application generates tailored reports that document leak detections, guide repair practices, and verify post-repair success.

Enjoy peace of mind knowing that your leak detection and maintenance strategies are backed by comprehensive, customizable documentation.

Why Choose the Fluke ii905 for Your Needs?

When selecting an acoustic imager, reliability, ease of use, and cutting-edge technology are paramount. The Fluke ii905 has been engineered to deliver exactly that. For a detailed comparison of models, consult the datasheet to ensure you select the best Fluke acoustic camera for your specific applications.

The Fluke ii905 Acoustic Imager is more than just a tool; it’s a comprehensive solution for reducing energy waste and enhancing maintenance efficiency across your operations.

Start optimizing your resources today with the Fluke ii905 and see the difference that advanced acoustic imaging and innovative LeakQ™ technology can make.

	Fluke ii500 Acoustic Imager	Fluke ii905 Acoustic Imager	Fluke ii915 Acoustic Imager
LeakQ™	Scale (1-10)	Leak size scale, leak rate, and leak cost estimation	Leak size scale, leak rate, and leak cost estimation
PDQ™			•
MecQ™			•
Features
WiFi / Bluetooth		•	•
Frequency	2 to 52 kHz	2 to 65 kHz	2 to 100 kHz
Detection range	Up to 50 m (164 ft)*	Up to 70 m (230 ft)*	Up to 120 meters (393 ft)*
Resolution	0.3 MP	5.0 MP	5.0 MP
Battery life	6 hours	6 hours	6 hours
Memory	20 GB (> 5000 pictures / > 999 videos)	32 GB (> 8000 pictures / > 1600 videos)	32 GB (> 8000 pictures / > 1600 videos)
Tripod connector		•	•

^{*Depending on ambient conditions}

The post Fluke ii905 Acoustic Imager with Innovative LeakQ™ Technology for Efficient Gas and Vacuum Leak Detection – Maximize Operational Efficiency and Energy Savings appeared first on rapid-tech.

Unparalleled Vibration Analysis Experience

Discover a unique vibration analysis experience with the V SHOOTER®-3-WL, the ideal equipment for the predictive maintenance of rotating machines. This revolutionary vibration analyzer integrates a wireless triaxial sensor with a rugged smartphone featuring on-board data processing software, offering unmatched precision and simplicity.

Product Variants

1. V SHOOTER-3-WL (Standard Version): The basic model with essential features for high-precision vibration analysis.
2. V SHOOTER-3-WL-IR HD: Enhanced with an HD infrared camera (256×192 px, 25 Hz) for comprehensive thermal imaging.
3. V SHOOTER-3-WL EX (ATEX Certified): Designed for hazardous environments, featuring a Smartphone Ex ib Ⅱ CT4Gb and Sensor Ex ia Ⅱ CT4Ga.

Key Features and Benefits

• Comprehensive Vibration Analysis: Easily identify defects in electric motors, pumps, fans, rolling bearings, and machine tool spindles.
• Wireless Triaxial Sensor: Perform a single measurement to analyze all three axes of vibrations, streamlining the diagnostic process.
• Advanced MCP Software: Automatically measures and diagnoses dangerous machine vibrations such as misalignment, foundation/loosening issues, bearing faults, and imbalance.
• Colour-Coded Severity Indicator: Quickly identify the severity of detected issues with a visual indicator.
• Versatile Data Management: Transfer data and reports to your PC seamlessly via USB-C connection.

Like the VSHOOTER®+ we have developed intuitive and easy-to-use software with which you will make global measurements RMS – FFT spectrum – Time signal – Trend curve.

Below you can see a thermal image of the VSHOOTER®-3-WL IR device.

The post V SHOOTER®+-3-WL Three Axis Vibration Tester – IP68, Wireless Triaxial Sensor, High-Precision Vibration Analysis, Includes Rugged Smartphone with MCP Software, Optional IR Camera and ATEX Certification appeared first on rapid-tech.

Equipped with a handy comparison function and timer measurement, the UT513C ensures accurate and efficient testing. It uniquely provides data storage up to 999 sets, allowing you to keep track of all your important readings. Plus, it includes PC software analysis via USB cable for thorough assessment of your results.

One of the key features of the UNI-T UT513C 5kV Insulation Resistance Tester is its automatic discharge function. With a high voltage output alarm function, it guarantees safe usage at all times. The device is powered by a rechargeable lithium battery of 14.8V, 5200mAh, which ensures long-lasting performance. The Overvoltage category of CAT IV 600V further adds to its safety measures.

In summary, the UNI-T UT513C 5kV Digital Insulation Resistance Tester is an indispensable tool for anyone involved in electromechanical installation and maintenance, or power supply departments of industrial and mining enterprises. Be sure to invest in this versatile and highly functional device for accurate, reliable, and safe testing.

Features of UT513B/UT513C 5kV Insulation Resistance Testers

• Capacitance test: 0.01uF～15.0uF
• Certificates: CE, UKCA
• Output voltage: Up to 5kV
• PI & DAR measurement
• Automatic leakage current display
• Stepping voltage: 10% of the range
• Comparison function
• Timer measurement
• Data storage: 999 sets
• PC software analysis: via USB cable
• Automatic discharge
• High voltage output alarm function
• Rechargeable lithium battery 14.8V, 5200mAh
• Overvoltage category: CAT IV 600V

The post UNI-T UT513C 5kV Digital Insulation Resistance Tester – High Voltage, CE & UKCA Certified with Data Storage and PC Software Analysis appeared first on rapid-tech.

Keeping a watchful eye on equipment and systems is vital to keeping them running smoothly and avoiding costly downtime. But sometimes, the target you need to inspect is out of reach or difficult to access. That’s where the FLIR ONE Edge Pro comes in. This innovative thermal camera wirelessly connects to your smart device, so you can easily take crisp, clear images from any position or angle.

The FLIR ONE Edge Pro uses 160 × 120 (19,200 pixels) thermal resolution and VividIR™, FLIR MSX® (Multi-Spectral Dynamic Imaging) technology to produce high-quality thermal images. This allows you to see temperature differences and subtle details that would be invisible to the naked eye. And with FLIR Ignite™, you can instantly upload images and videos from your FLIR ONE Edge Pro to the cloud for easy sharing and editing.

Compatible with iOS and Android smartphones and tablets, the FLIR ONE Edge Pro is an incredibly versatile tool that will help you keep a close eye on your critical equipment. Whether you’re in preventative maintenance or troubleshooting mode, the FLIR ONE Edge Pro is an invaluable tool for maintaining optimal operations.

Ordering guide

KEY DIFFERENTIATED FEATURES

• WIRELESS IMAGE TRANSFER
  • Wireless streaming of images to the smart phone or tablet
  • Camera compatible with all phones and tablets with iOS or Android
  • Enables easier scaling of tool to hundreds or thousands of technicians
  • Futureproof against phone or tablet changes

• DETACHABLE WAND DESIGN
  • Unique, detachable wand design
  • Enables easy scanning over, under and around obstacles
  • Fits better on phone and tablets without blocking cameras or awkward holding of device

• UNIQUE DECISION SUPPORT APPS
  • FLIR Tools Mobile with FLIR Ignite allows for automatic secure upload of image data and sharing to selected team members
  • New Apps for Home Inspection, Automobile Inspection, and Industrial Inspection to support inexperienced thermographers to make good decisions

The post FLIR ONE EDGE Pro – | FLIR appeared first on rapid-tech.