• User friendly
• High-quality audio system with vibration alerts for noisy environments and sun light readable display
• Ensure reliable results with sensitive and accurate signal processing

Capable of adapting to difficult situations

• A perfect solution for congested underground infrastructure
• Rejects strong interfering signals
• Locate target power cable when several are present

On-site best practices driven by technology

• Ensures improved detection by correct locator handling
• Using the automatic usage logging feature, you can monitor field operations
• Adding value to your client’s operations by differencing yourself from your competition

Premium quality, ergonomic design

• Rugged yet light weight and ergonomic
• Designed and built in Great Britain to the highest standards
• Self Test for confidence and trust in your locator measurements

Calibration Certificates and eCert

The post Radiodetection RD8200 Underground Services Locator | Cable and Pipe Locator appeared first on rapid-tech.

The RD7200 – Accurate locating across multiple industries

Construction

Accurate and simple to use, the RD7200 comes with eight active and three passive frequencies that cover the majority of site locating tasks. A rugged, IP65 rated casing along with a high contrast screen make it suitable for use in all weather conditions.

Power

In complex power environments, with multiple signals from high voltage equipment and cables, Radiodetection’s Dynamic Overload Protection reduces the effect of interference and Power Filters can be used to trace a single target line amongst multiple cables.

Water and Pipeline:

A wide choice of active frequencies allow conductive pipes to be traced for long distances.

Where sondes or cameras are used to survey pipes made from a variety of materials (including cast iron, clay, fiber, concrete and brick) the four RD7200 sonde frequencies are ideal for quickly locating and tracing their position.

Pipes with Cathodic Protection System can be followed using the CPS passive mode. CPS compass mode ensures alignment with the target pipeline.

Telecom

TheRD7200 features higher frequencies to locate high impedance lines and sonde frequencies for duct and conduit tracing. Higher frequencies can also be used to trace sheathed domestic cables without grounding connections.

Cable sheath faults can be located to within 4” (10cm) using 8kHz Fault Find mode with a Radiodetection A-Frame.

The RD7200 offer many features designed to drive correct usage, reduce utility damage and improve safety

Swing Warning System, drives correct usage

Locators must be kept perpendicular to the ground for best accuracy. RD7200 locators have a built-in gyroscopic measurement system which alerts the user of excessive swing, driving correct usage.

StrikeAlert™ in active and passive locating modes

Visual and audio warnings of shallow cables reduces the risk of accidents.

Vibration feedback, reduces the chance of missed warnings

The RD7200 locator handle vibrates when alerts activate, leaving the operator to concentrate on the job at hand.

The RD7200 is a rugged locator capable to operate in most difficult conditions

Made in the UK – No compromise on quality

The RD7200 locator and transmitters are designed and manufactured in Great Britain and are subjected to a rigorous test regime before leaving our factory.

Use it all day, day after day – light weight and ergonomic

The RD7200 has been designed around the operator’s needs. The iconic industrial design provides an exceptionally well balanced, and light weight tool which is comfortable for extended periods of use

Self-test – operator confidence on-site

The integrity of the measurement system can be confirmed on-site. Self-test applies signals to the locating circuitry as well as checking display and power functions.

Knowledge base and Technical support, when you need it

RD7200 offers a comprehensive knowledge base library which is available to consult online from a mobile device or pc. Find an answer to or ask technical questions 24/7 by using Radiodetection’s support portal.

Calibration Certificates and eCert

The post Radiodetection RD7200 TX5 Underground Services Locator | Cable and Pipe Locator appeared first on rapid-tech.

The post Tenmars TM-904 Fibre Fault Locator appeared first on rapid-tech.

• DC Voltage.
• AC True RMS Voltage.
• AC True RMS Current with External Clamp.
• AC True RMS Leakage Current with external clamp (optional).
• DC Current.
• Resistance.
• Continuity test with buzzer.
• Frequency with test leads.
• Frequency with External Clamp.
• MIN/MAX/ AVG functions.
• PEAK function with response time 1ms.
• HOLD function.

Safety Test Section

• Continuity test (200mA) of protective conductors.
• Insulation Resistance measurement (500V DC).
• Trip-out time of RCD type AC Standard with test current of 30mA, 30 x 5mA, 100mA, 300mA.
• Global Earth Resistance with RCD tripping.
• Phase sequence indication at 1 or 2 wires.
• Phase coincidence indication at 1 or 2 wires.
• Leakage current (with HT96U optional clamp + NOCANBA connector).
• AUTOTEST function: automatic sequence test of Global Earth Resistance + RCD test + Insulation test with OK, NOT OK indicates LAN SECTION..

LAN Section

• Test executed on twisted pair cables UTP and STP with RJ45 connector.
• Wire mapping control of following conditions: OPEN, SHORT, CROSS, REVERSE, SPLIT, MISWIRE message at display.
• Quick selection of cable pairs.
• Automatic detection of remote control units (from #1 to #8).
• AutoPower OFF.
• Low battery indication

Included Accessories

• HT4003: 400A AC Current clamps.
• C2075: Two terminal cable with SHUKO plug.
• KIT0075: Set of 2 cables with test leads + 2 alligator clips.
• N^o2 Remote identifier #1, #2.
• N^o3 Patch cables, 30cm, RJ45 connectors.
• BORSA75: carrying bag.
• Calibration certificate ISO9000.
• Instruction manual.
• Warranty card.

  Optional Accessories

• HT96U 1-100-1000A/1V leakage current clamp (jaw opening 54mm max. dia.).
• NOCANBA adapter (for connection to HT96U clamp).
• REM38 No.6 Remote identifier unit #3, #4, #5, #6, #7, #8.
• REM3 remote unit #3 + connection cable RJ45-RJ45.
• REM4 remote unit #4 + connection cable RJ45-RJ45.
• REM5 remote unit #5 + connection cable RJ45-RJ45.
• REM6 remote unit #6 + connection cable RJ45-RJ45.
• REM7 remote unit #7 + connection cable RJ45-RJ45.
• REM8 remote unit #8 + connection cable RJ45-RJ45.

The post HT ITALIA M75 Multitest True-RMS AC DMM & LAN Tester appeared first on rapid-tech.

Extech CT40 Features:

• Transmitter/Receiver enables one person to remotely identify up to 16 wires
• Wire voltage check from 5 to 16VDC
• Multimeter functions include: AC/DC Voltage and Current, Resistance, Diode, and Continuity
• Data Hold and Max Hold
• Low battery indicator (transmitter and receiver)
• Auto power off
• CAT III-600V safety rating
• Complete with 16-line Transmitter, Multimeter/Receiver, two 9V batteries, pouch case, and 2 AAA batteries

Extech CT40 Specifications

The post EXTECH CT40 Cable Identifier/Tester Kit appeared first on rapid-tech.

One person operation for wire and cable testing with the EXTECH CT20 Continuity Tester Pro.

• Local continuity checking –
  is accomplished by a bright flashing LED and loud pulsating beeper.
• Remote continuity –
  with the use of the remote probe, it does not tie-up two people when identifying and labeling long distance wire/cable runs.
• Flashing remote probe –
  Two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time for correct labeling with only one trip to the other end location – cuts down on multiple trips back and forth.
• Polarity verification –
  Drives a 20mA DC current pulse through the wires or cables under test to the bi-color remote probe. This enables the technician to identify each of the wires under test at the other end of the cable run and eliminates the possibility of false high impedance readings.
• Lightweight / Pocketsize –
  clips on and hangs from the cable(s) under test without falling off.

The post EXTECH CT20 Continuity Tester Pro appeared first on rapid-tech.

The Tenmars TM-903 verifies does the following:

• Detects opens, shorts, miss wires and split pairs on twisted pair cabling.
• Displays graph wiremap , opens, shorts, miss wires, split pairs, and the remote ID number all on one screen.
• Identify remote ID number only one pair.
• Measures length.
• Using multiple remote ID up to 8 locators.
• Auto backlight for low light areas
• Auto power off.

TENMARS TM-903 Multimedia Cable Tester Specifications:

Safety Precaution CAUTION Be extremely careful for the following conditions when measuring with the TENMARS TM-903 Multimedia Cable Tester.

1. Do not operate the meter under the environment with explosive gas (material), combustible gas (material) steam or filled with dust.
2. In order to avoid reading incorrect data, please replace the battery immediately when the symbol “ ” appears on the LCD.
3. In order to avoid the damage caused by contamination or static electricity, do not touch the circuit board before you take any adequate action.
4. Operating Environment: Indoors use. This instrument has been designed for being TM-901N/TM-902/TM-903 2 used in an environment of pollution degree 2.
5. Operation Altitude: Up to 2000M.
6. EMC: EN61326-1(2006), IEC 61000-4-2(2008, IEC 61000-4-3(2006) + (2007).

The post TENMARS TM-903 Multimedia Cable Tester appeared first on rapid-tech.

The TM-902/TM-903 Multimedia Cable Tester (TM-901N LAN Cable Tester)is a hand-held test instrument that lets you verify and troubleshoot the Lan cable of twisted pair.

2 Safety Precaution

CAUTION Be extremely careful for the following conditions while measuring z Do not operate the meter under the environment with explosive gas (material), combustible gas (material) steam or filled with dust. z In order to avoid reading incorrect data, please replace the battery immediately when the symbol “ ” appears on the LCD. z In order to avoid the damage caused by contamination or static electricity, do not touch the circuit board before you take any adequate action. z Operating Environment: Indoors use. This instrument has been designed for being TM-901N/TM-902/TM-903 2 used in an environment of pollution degree 2.

3 The verifier does the following:

z Detects opens, shorts, miswires and split pairs on twisted pair cabling. z Displays graph wiremap , opens, shorts, miswires, split pairs, and the remote ID number all on one screen. z Identify remote ID number only one pair. z Measures length. z Using multiple remote ID up to 8 locators. z Low battery detector “ ”. z Auto backlight. z Auto power off.

The post TENMARS TM-901N LAN Cable Tester appeared first on rapid-tech.

Features:

• Testing of LAN cable UTP, FTP, STP with RJ45 connectors
• Testing of BNC coaxial cables
• Detection errors including open, short, reversed, crossed, split couples
• Error message function on display
• Length measurements of cables up to 350m
• Detection of up to 4 remote units
• Internal memory for saving test results
• Auto power off

Product Description

• Test on LAN cable UTP, FTP, STP with RJ45 connector
• Test on BNC coax cables
• Detection error: open, short, reversed, crossed, splitted couples
• Error message at display
• Lenght measurements of cables up to 350m
• Detection up to 4 remote units
• Internal memory for saving test
• Auto Power OFF

Accessories

• Remote unit #1
• Patch cable RJ45, FTP, 20cm, 2 pcs
• Carrying bag
• Batteries
• User manual

The post HT ITALIA QUICKLAN6050 Wire Map Tester appeared first on rapid-tech.