Welcome to the next generation of oscilloscope technology, the R&S MXO 5 Series, explicitly designed to meet and surpass all your electronic testing challenges. This revolutionary technology is your passport to a more efficient understanding and testing of electronic systems.

With models boasting impressive four and eight channel capabilities, the R&S®MXO 5 is in a league of its own. Its superior specifications stand as a testament to its top-notch performance in the industry.

R&S®MXO 5 Series, base models

Why Choose the R&S®MXO 5? Discover the Benefits of this Outstanding Product

Discover the power of performance with the R&S®MXO 5, a true game-changer in the realm of speed and precision. This cutting-edge device boasts rapid acquisitions with multiple channels, math functions and an impressive 21 ns rearm time for minimal blind time. With its unparalleled spectrum analysis capabilities, it allows for simultaneous operation of up to four analyses, delivering fast and pristine results.

The R&S®MXO 5 stands as a testament to uncompromised performance, offering the highest vertical offset range of ±5 V at 0.5 mV/div for exceptional signal fidelity. It features a low noise floor and the industry’s most sensitive trigger down to a remarkable 0.0001 div. Coupled with the best-in-class trigger jitter of less than 1 ps, it promises flawless digital triggering at 18-bit HD resolution with adjustable sensitivity.

Equipped with the deepest standard memory in its class, the R&S®MXO 5 can handle up to 1 million waveform segments. With a 12-bit ADC/18-bit HD resolution, it delivers the highest precision. Furthermore, it provides deep memory capture with 500 million points/channel and the industry’s fastest acquisitions at a staggering 4.5 million waveforms/s.

The R&S®MXO 5’s impressive features are complemented by a stunning 15.6″ Full HD touchscreen, offering increased visibility and user convenience. It covers a bandwidth range from 100 MHz to 2 GHz and boasts an impressive sample rate of up to 5 Gsample/s.

Experience the evolution in speed, precision, and sensitivity with the R&S®MXO 5. The ultimate choice for those seeking unparalleled performance.

Embracing cutting-edge technology in power conversion testing, the R&S®MXO 5 is a revolutionary solution geared towards facilitating the growth and development of wide bandgap power semiconductors, a vital component of renewable energy and electrification. With eight channels offering comprehensive visibility of three-phase and six-phase motor drives and inverters, the R&S®MXO 5 provides an unmatched testing performance.

POWER SEQUENCING AND INTEGRITY

The R&S®MXO 5 ensures flawless power sequencing, a critical aspect of all electronic circuits. Equipped with the ability to observe up to eight analog channels and reference waveforms concurrently, it guarantees precise power amplitude at the right time. It comes with a standard 500 Mpoints, crucial for recording over extended periods and achieving a substantial sample rate for observing small signal events.

AUTOMOTIVE ANALYSIS

In the rapidly evolving world of electric motors and inverters, the R&S®MXO 5 provides vital insight into their efficiency and drive power. With its eight channels, it can monitor PWM controlled gates, critical for multiphase topologies. It’s the ideal tool for assessing compliance requirements and decoding automotive protocol in the emerging domain controller networks seen in autonomous and smart cars.

SIGNAL INTEGRITY AND DEBUGGING

For signal testing where error detection is paramount, the R&S®MXO 5 offers a waveform acquisition rate of over 4.5 million. It can detect rare and sporadic events that other oscilloscopes might miss, even with up to four channels activated. With four hardware-accelerated spectrum channels, it can perform up to 180,000 FFT/s, ideal for testing and debugging harmonic, EMI, or other applications requiring superior spectrum capabilities.

ACCELERATED INSIGHTS

With over 4.5 million acquisitions/s, the R&S®MXO 5 is the world’s first 8-channel oscilloscope designed to reveal infrequent anomalies instantly. Its real-time signal capture is up to 90%, thanks to the MXO-EP ASIC and a dedicated PC system for responsive analysis.

CAPTURE EVEN MORE TIME

The R&S®MXO 5 comes with the industry’s deepest memory on eight channels, standard segmented memory, and history mode. These features ensure comprehensive coverage and analysis of data over time.

SEE SIGNALS ACCURATELY

The R&S®MXO 5 boasts the lowest measurement noise and highest vertical resolution on eight channels. Features like a 12-bit ADC, 18-bit architecture with HD mode, and low noise of 130 μV contribute to its accuracy.

TRIGGER ON EVERY DETAIL

The high precision digital trigger on the R&S®MXO 5 is a world-first for 8-channel oscilloscopes, with a sensitivity down to 0.0001 vertical division and user-adjustable trigger hysteresis.

MULTISPECTRAL EVOLUTION

With 12 pristine RF measurements and more capabilities, the R&S®MXO 5 is the first 8-channel oscilloscope boasting 4 spectra with independent time and frequency control.

SUPERIOR USER EXPERIENCE

With its toolbar, advanced usability and R&S®SmartGrid, the R&S®MXO 5 offers an unparalleled user experience, making it a definitive choice in the industry.

The post R&S MXO 5 Oscilloscope |- Revolutionary 8-Channel and 4-Channel Oscilloscopes with Advanced Power Conversion Testing, Automotive Analysis, and Superior Signal Integrity Capabilities appeared first on rapid-tech.

See the big picture with up to 1.5 GHz of bandwidth and 5 Gsample/s sample rate. The large 13.3” Full HD capacitive touchscreen with SmartGrid waveform layout, color-coded controls, and clear menus making it easy to see complex waveforms. No other oscilloscope in the world updates faster in real-time, at a rate of 4.5 million acquisitions per second. With this kind of detail and signal visibility, engineers can spot rare events as they happen.

The Rohde & Schwarz MXO 4 Series Oscilloscope is a powerful instrument that offers a standard acquisition memory of 400 Mpoints on all four channels. With an optional 800 Mpts interleaved (400 Mpts- 4 chanels, 800 Mpts – 2 chanels ), the oscilloscope has up to 100 times the standard memory of comparable instruments.

R&S MXO 4 is ideal for general purpose measurement, serial data analysis, jitter analysis, embedded design verification, frequency response analysis, and more. No matter what your application, the R&S MXO 4 Series has the power and flexibility to handle it. From basic signal analysis to advanced embedded design debug, these oscilloscopes have the features and performance you need to get the job done right.

See your signals with clarity, the highest vertical resolution and the lowest measurement noise.

The best user experience

Advanced usability and ease of use, as well as fast remote control, are all included in the interface.

1 – Toolbar  |  2 – Main menu  |  3 – Signal activators  |  4 – R&S®SmartGrid  |  5 – Signal toolbar  |  6 – Box design

The post R&S MXO 4 Series Oscilloscope -| > 4.5 million wfms / sec, 12-bit ADC 18-bit HD, 400 Mpts memory /ch, Digital trigger appeared first on rapid-tech.

Universal LCR meter

• Fast, accurate and versatile (Fast: ≤ 15 ms, Medium: ≤ 100 ms, Slow: ≤ 500 ms)
• Selectable frequency range (4 Hz to 10 MHz)
• Test signals for all requirements (100 mV to 10 V – up to 200 mA)
• DC bias (Voltage of up to 10 V)
• Measurement functions
• Data logging function (up to 10 sample/s)

Options for advanced applications

• R&S LCX-K106 advanced analysis functions
• R&S LCX-K107 digital I/O ports and binning function
• R&S LCX-K108 extended bias functions
• R&S LCX-K201/-K210 frequency upgrade to 1 MHz/10 MHz

Easy operation

• High-resolution touchscreen
• Graphical representation of measurements
• Save and recall instrument settings

Test fixtures

• R&S LCX-Z1 test fixture for axial/radial lead type devices
• R&S LCX-Z2 Kelvin clip lead
• R&S LCX-Z3 test fixture for SMD components
• R&S LCX-Z4 test tweezers for SMD components
• R&S LCX-Z5 transformer test cables
• R&S LCX-Z11 BNC extension

R&S®LCX100 LCR meters cover a frequency range of 4 Hz to 300 kHz. The R&S®LCX200 has an upper frequency limit of 500 kHz and can be extended to 1 MHz or 10 MHz using software options when needed. 

The R&S®LCX200 offers an upper frequency limit of 500 kHz and can be extended to 1 MHz or 10 MHz using software options when needed. 

DC measurements are available on all instruments. Most applications can be covered with voltages as high as 10 V generated internally. It is also possible to apply bias voltages of up to 40 V externally. 

All measured values are recorded up to 10 times per second using the fast logging function.

The advanced analysis function allows you to perform dynamic impedance measurements. These sweep measurements determine the impedance values for a series of frequency values or other parameters. 

Digital I/O ports can be used to trigger and control measurements externally. Using the binning function, the measured components can be sorted by their values into eight categories. 

With the large capacitive touchscreen, you can operate the instruments in a modern and intuitive way and visualize the results of your measurements graphically. 

Remote controllability and rack installation make the R&S®LCX ideal for system applications.

Ideal for use in labs and test systems

• Tailored for use in labs and system racks
• Full remote capabilities
• Advanced instrument design: compact form factor, quiet operation

Key facts

The post R&S LCX LCR METER | DC, 4 Hz to 10 MHz | R&S LCX100 LCR | R&S LCX200 appeared first on rapid-tech.

The NGU SMUs include six current ranges from 10 µA with 100 pA resolution, to 10 A with 10 µA resolution. For all ranges, accuracy up to 0.025 % is achieved. Voltage is measured with 10 µV resolution in the 20 V range and 1 µV resolution in the 6 V range.

For the typical measurement problem of capacitance at the input to the device under test, the R&S NGU features a variable capacitance mode adjustable in steps from 1 µF to 470 µF, compensating the capacitance, so that the current is displayed as if it was measured directly at the device under test. Devices up to 20 V, 8 A, and 60 W are all supported.

R&S NGU Features:

• Easy operation
• High-resolution touchscreen
• Color coding of operating modes
• Graphical display
• QuickArb function
• EasyRamp function
• Save and recall instrument settings

What sets the R&S NGU source measure unit apart?

• Two quadrants: source or sink operation
• Minimum residual ripple and noise to supply interference
• free voltage to sensitive DUTs
• Fast regulation of output voltage with minimum overshoot and very fast load recovery time
• Acquisition rate of up to 500 ksample/s to capture extremely fast variations in voltage or current
• Voltage priority and current priority mode
• High-capacitance mode
• Battery simulation

R&S NGU201 – for the wireless communications specialist

• Two quadrants: operates as source and sink
• Variable output impedance and constant resistance mode
• Digital voltmeter (DVM) function
• Battery simulation

The Rohde & Schwarz NGU201 source measure unit is tuned for battery drain analysis of any battery-powered device up to 60 W, including mobile phones, tablets and IoT devices, for example. Furthermore, it can be used for
battery tests and simulations, thanks to its adjustable output impedance and optional battery simulation tool

R&S NGU401 – the semiconductor testing specialist

• Four quadrants: source or sink operation with arbitrary polarity
• Modulation input

The R&S NGU401 source measure unit is the specialist for semiconductor testing. It is designed for general purpose applications that span many different industries and many different devices under test. The R&S NGU401 source measure unit can act as bipolar power supply or bipolar electronic load.

The post R&S NGU Source Measure Units appeared first on rapid-tech.

Maintaining the operation of RF communications systems requires fast identification of any defects in the system components. The R&S ZNH is a multifaceted handheld vector network analyzer that helps on-site field engineers remedy defective components detected in the system.

The basic version of the R&S ZNH can perform one-port cable and antenna measurements and four S-parameter measurements up to 26.5 GHz.

With the addition of the power meter, pulse measurement, wave ratio and wave quantities functionalities, the R&S ZNH enables field engineers to maintain and restore radar and satellite systems quickly.

Simple to Operate

The ZNH offers flexible and straightforward operation. Depending on the application, it can be operated either via its 7″ capacitive touchscreen (no display calibration required) or the keypad. The touchscreen enables users to adjust the most common settings, such as parameter settings, and manage markers with smartphone-like gestures.

The inbuilt measurement wizard simplifies measurements by automating, standardizing and optimizing test sequences. A sequence of standardized, recurring measurements can be performed quickly and easily. The proven wizard function helps eliminate human error and supports the user in making correct measurements from the start.

Simple and fast setup with configuration overview menu The analyzer can be operated with the keys and rotary knob and with the touchscreen. The keys are large and well spaced out. This makes the analyzer ideal for operation with gloves.

Key Features

► Frequency range from 30 kHz to 4/8/18/26.5 GHz
► One-port cable and antenna measurement with basic instrument
► S-parameter (S11, S12, S21, S22) measurement with basic instrument
► 100 dB (typ.) dynamic range for filter and antenna isolation measurements
► Factory calibration over entire frequency range
► Built-in receiver step attenuator to increase port input power range linearity
► Built-in DC voltage supply (bias) for active components such as amplifiers
► Easy handling due to low weight (3.1 kg with battery) and spaced out function keys
► Fast boot time, non-reflective display, small form factor, ruggedized housing (IP51)
► 7″ color touchscreen display for intuitive operation with smartphone-like gestures
► Measurement wizard to speed up measurements and eliminate human error
► Save measurement results onto an SD memory card or a USB flash drive
► Easy and cost-efficient upgrades for all options via software keycode

Light Weight Design, Heavy Performance

With a small form factor, the R&S ZNH offers outstanding RF performance in the handheld class and provides one-port cable and antenna measurements and full two port S-parameter measurements as standard. It even has a built-in receiver step attenuator to increase the linearity of the port input power range

The post R&S ZNH Handheld Vector Network Analyzer appeared first on rapid-tech.

Basic Set 1

Basic Set 2

Mid Range Set

Advanced Set

Call us on FreePhone 1800 358 531
and ask us about our
EMI/EMC Pre-Compliance
Solutions

The post EMI/EMC Pre Compliance Equipment Sets appeared first on rapid-tech.

The R&S ENV216 two-line V-network for disturbance voltage measurements on single-phase EUTs

Features

Air-core design and artificial hand

The R&S ENV216 two-line V-network is based on air-core inductances and contains an artificial hand.

Switch-selectable high pass filter of 150 kHz

To prevent the measuring receiver from being overdriven by low-frequency spectra of high level, a 150 kHz highpass filter can be cut in.

Built-in 10 dB attenuator pad

To ensure standard impedance irrespective of the receiver input attenuation, the R&S ENV216 is equipped with a 10 dB attenuator pad.

Built-in pulse limiter (can be switched off)

A built-in pulse limiter which can be switched off protects the receiver input.

Remote control with TTL levels (compatible with Rohde & Schwarz measuring receivers)

TTL control inputs that can be driven by controllers and Rohde & Schwarz measuring receivers are provided for remote control in automatic test systems (phase selection and activation of highpass filter). Optocouplers prevent pick-up of external disturbance.

Key facts

A female connector with protective earth contacts is provided for connecting the EUT. Various models with country-specific connector systems are available.

Owing to its compact design and low weight, the R&S ENV216 is ideal for frequently varying applications and especially for on-site disturbance voltage measurements on single-phase EUTs. Note that high leakage currents are produced because of the standard design of these V-networks. The networks should therefore be connected to a low-impedance protective earth system. In uncertain cases, an isolating transformer should be used

The post R&S ENV216 Two-Line V-Network appeared first on rapid-tech.

The R&S HM6050 Two Line Impedance Stabilization Network (LISN)is used as a reproduction of supply networks in order to be able to carry out the line-bound interference emissions as part of measurements and tests for electromagnetic compatibility (EMC).

The HM6050 suppresses high-frequency interference from the supply network, establishes a standardized impedance for the device under test, and decouples the high-frequency radio interference voltages from the device under test in order to be able to supply it to a spectrum analyzer or EMI receiver.

The R&S HM6050 is a single-phase V-network simulation for the frequency range from 9 kHz to 30 MHz (according to CISPR 16) and is suitable for maximum currents up to 16A

Technical data

• Frequency range: 9 kHz to 30 MHz
• The picture resistance: Z=50 Ω II (50 μH + 5 Ω)
• Max. operating current: 16 A
• Hand to the formation: 220 pF + 511 Ω
• Protective conductor according to education: 50 Ω II 50 μH
• Transient Limiter Frequency range: 150 kHz to 30 MHz
• Transient Limiter Transmission loss: 10 dB (+1.5/- 0.5 dB)

The post R&S HM6050 Two Line Impedance Stabilization Network (LISN) appeared first on rapid-tech.

The combination of very good RF characteristics and all of the important functions needed for fast, precise measurement and evaluation of the EMC of a device under test in accordance with commercial standards is unmatched in this class of instrument.

The diverse analysis capabilities, high measurement speed and time-saving automated test routines make the R&S ESL the obvious choice for any development lab that needs to prepare for the final EMC certification tests.

Features & Benefits

Precise, reproducible measurement results due to very good RF characteristics

The post R&S ESL EMI Test Receiver 9 kHz to 3 GHz or 9 kHz to 6 GHz appeared first on rapid-tech.

The I/Q modulation bandwidth of up to 2 GHz with internal baseband satisfies fourth and fifth generation standards (e.g. 5G, LTE-Advanced and IEEE802.11ac/ad), and the R&S SMW200A is designed to meet future requirements. Its modular scalable architecture allows users to optimize the generator to their applications and to upgrade it as required.

A second RF path can be added, as well as a maximum of two baseband and four fading simulator modules – without compromising signal quality. As a result, the R&S®SMW200A can create signal scenarios that previously required multiple instruments or could not be implemented at all. From MIMO up to 8×2 and LTE-Advanced carrier aggregation including fading to multistandard radio – never before has an instrument offered such high class signal generation capability.

If more than two RF paths are required, additional R&S SGMA signal generator modules can be connected. The intuitive, touchscreen based operating concept provides the user with an overview of measurements, no matter how complex, and quickly delivers the desired results.

Versatile configuration

Thanks to its modular design, the R&S SMW200A can be equipped with the exact options required for a specific application. Any configuration is possible, from a classic single-path vector signal generator to a multichannel MIMO receiver tester.

The generator can be equipped with a maximum of two internal baseband modules and four fading simulator modules. It is also possible to install a second RF path. This concept yields two full-featured vector signal generators in a single unit, so that even complex signal scenarios (e.g. wanted signal + interferer, dual cell, TX/RX diversity) can be created easily.

Modular architecture for optimal adaptation to the application at hand

Almost all options of the R&S SMW200A can be retrofitted, most of them simply via key code. Starting from the basic configuration as a classic single-path vector signal generator, the R&S®SMW200A can be customized as required for any application. Users only have to purchase what they currently need and are free to decide on upgrades according to their future requirements.

GROWS WITH YOUR NEEDS

Advanced technology and a modular, upgradeable hardware concept make the R&S SMW200A a future-ready investment.

R&S SMW200A hardware options can be retrofitted with minimum effort. The baseband modules come as plugins and can easily be inserted into the rear panel without opening or recalibrating the instrument.

Software functions (e.g. digital standards) are simply activated via key codes. The R&S SMW200A firmware can be updated from a USB flash drive or via LAN. Free updates can be downloaded from the R&S website.

In this way, the R&S SMW200A can be precisely customized to suit the applications at hand and can be enhanced whenever new requirements arise. Users only have to purchase what they currently need and are free to decide on upgrades according to future requirements.

The post R&S SMW200A Vector Signal Generator appeared first on rapid-tech.