HT Italia HT7010 Clamp Meter 400A AC Autoranging

The HT7010 clamp meter is completely Autoranging making it extremely easy to use. The clamp is dedicated to the control of alternating currents up to 400A AC. The meter has a HOLD function to freeze the reading on the LCD display. The HT7010 has an Auto-Power Off function to preserve the internal battery.

Functions

  • Automatic selection of measurement ranges and fully Autoranging.
  • AC current up to 400 Amps.
  • AC/DC voltage up to 600 Volts.
  • Resistance ranges.
  • Continuity test with buzzer.
  • Data Hold function.
  • Auto Power Off.
  • Maximum conductor size 27mm.

Included Accessories

  • KIT4000: Test leads.
  • Carrying bag.
  • Battery.
  • User’s manual.

WARRANTY 3

HT 4020 Data SheetHT 7010 Data Sheet

If you would like more information regarding this product, simply email us here.
  • This field is for validation purposes and should be left unchanged.
SKU: HT Italia HT7010 Categories: , Tags: ,

The HT Italia HT7010 Clamp Meter is a complete Autorange meter which makes it extremely easy to use, it will automatically select the type of measurement and right range of values. This reduces any mistakes which can damage the instrument and, therefore, the final user.

This clamp is used in the control of relatively low alternating currents and has a built-in HOLD function to freeze the reading on the LCD display.

The HT Italia HT7010 Clamp Meter has an Auto PowerOff function to conserve the internal battery.

It can be used to clamp-on a conductor with the maximum size of 27 mm. It is extremely small but very functional and with test lead storage on the back of clamp, when the operator isn’t executing any voltage measurements.

HT Italia HT7010 Clamp Meter Specifications:

Specifications
ELECTRICAL SPECIFICATION
Accuracy is indicated as [% rdg + dgt]. It is referred to the following reference conditions: 23°C ± 5°C with RH < 80%
DC Voltage
Range Resolution Accuracy Input impedance Overload protection
1.8 ÷ 600.0V 0.1V ±(1.0% rdg + 2 dgt) from 4kΩ if VIN ≤ 30V
to 200kΩ if VIN=600V
600Vrms AC
-0.6 ÷ -600.0V ±(1.0% rdg + 4 dgt)
Max operation time: 30s if V ≥ 30V
AC Voltage
Range Resolution Accuracy Input impedance Overload protection
0.00 ÷ 199.9V 0.1V ±(1.5%rdg + 5 dgt) from 4kΩ if VIN ≤ 30V
to 200kΩ if VIN=600V
600Vrms AC
Max operation time: 30s if V ≥ 30V
Frequency range: from 50 Hz to 500 Hz
AC Current
Range Resolution Accuracy Input impedance Overload protection
0.6 ÷ 400.0A 0.1V ±(1.8% rdg + 3 dgt) 50 – 60Hz 400Arms
Readings less than 50A: add ± 3 dgt to accuracy
Resistance and test continuity
Range Resolution Accuracy Buzzer Overload protection
0 ÷ 99.9Ω 0.1Ω ±(2.0% rdg + 10 dgt) ≤ 25Ω 600Vrms AC
100 ÷ 2000Ω ±(2.0% rdg + 2 dgt)
Max open voltage: 1.5V
GENERAL SPECIFICATIONS
Features
  • Auto Selection on ACV, DCV, ACA and Ohm
  • Data Hold
  • Auto power off
  • Continuity Beeper
Supply
Battery type: 1 battery 9V NEDA 1604 IEC 6F22 JIS 006P
Low battery indication: “+-” is displayed when the battery level is too low
Battery life: about 250 hours
AutoPowerOff: About 30 minutes after power-on
Display
Characteristics: 3 ¾ dgt (6000 counts) plus decimal point, unit symbol
Sample rate: 5 times/sec
Conversion mode: Mean Value
Mechanical characteristics
Size: 198(L) x 66(La) x 46(H)mm
Weight (including battery): about 260g
Jaws opening: 35mm
Max conductor size: 27mm
Climatic conditions
Reference temperature: 23° ± 5°C
Operating temperature: 0 ÷ 40 °C
Operating humidity: < 75% RH
Storage temperature: -20 ÷ 60 °C
Storage humidity: < 80% RH
Safety standards
Comply with: EN 61010-1
Insulation: Class 2, Double insulation
Pollution: Level 2
For inside use, max height: 2000m
Installation category: CAT III 600V between inputs and to ground

Reviews


There are no reviews yet.

Be the first to review “HT Italia HT7010 Clamp Meter 400A AC Autoranging”