Stop Fighting Unstable Pressure During Critical Calibrations

You’re on-site calibrating pressure transmitters, and your traditional hand pump is making you work twice as hard. You’re pumping frantically to reach 30 bar, the pressure keeps drifting, and you’re burning valuable time trying to maintain stability long enough to record a reading. Meanwhile, your client’s production team is waiting for you to finish, and you’re questioning whether your calibration certificate will hold up under scrutiny.

The Additel ADT992 Handheld Pneumatic Pressure Pump eliminates this frustration. Designed specifically for field calibration professionals, this pump delivers consistent pressure generation from 95% vacuum to 700 psi (50 bar) – covering the vast majority of industrial pneumatic calibration requirements across Australian HVAC, compressed air, and process instrumentation applications.

Dual-Stage Engineering: Work Smarter, Not Harder

The ADT992’s dual-stage piston design fundamentally changes how you approach pressure calibration. The pre-pressure piston rapidly builds bulk pressure with minimal physical effort – you’ll reach 40 bar faster than with conventional hand pumps, without the arm fatigue. Once you’re approaching your target pressure, the fine adjustment screw (7.2 ml volume capacity) provides precise control for hitting exact calibration points.

Each lever stroke delivers a +30 psi (2 bar) boost, giving you predictable, controlled pressure increases. The 10 Pa (0.1 mbar) adjustment resolution means you can dial in precise pressure values required for tight-tolerance calibrations. This isn’t just convenient – it’s the difference between completing 10 calibrations per day versus 6, and arriving home without exhausted forearms.

Built-In Vacuum Capability: One Pump, Complete Pressure Range

Unlike basic pressure-only hand pumps, the ADT992 generates vacuum down to 95% (approximately -950 mbar), making it genuinely versatile for calibration technicians who work with both positive pressure and vacuum instruments. Calibrating vacuum switches, negative pressure transmitters, or differential pressure devices no longer requires carrying separate equipment.

The minimum pre-pressure of 600 psi (40 bar) means you can efficiently generate high pressures without excessive pumping cycles, while the 35 ml maximum load volume provides the capacity needed for testing larger-volume pressure systems without constant re-pumping.

Multi-Position Versatility: Designed for Real Job Sites, Not Just Lab Benches

Australian trade professionals work in cramped plant rooms, alongside running machinery, on elevated platforms, and in confined spaces where traditional hand pumps become awkward or impossible to operate effectively. Additel engineered the ADT992 with this reality in mind.

The adjustable reference port and dual rubber grips enable horizontal, vertical, or tilted operation – whatever orientation suits your specific installation. Calibrating a wall-mounted pressure transmitter at head height? Work vertically. Testing equipment on a workbench? Operate horizontally. Awkward installation in a tight mechanical room? Adjust the pump to whatever position gives you access.

At just 1.6 kg (3.5 lbs) and measuring 320mm x 110mm x 122mm (base x width x height), the ADT992 fits in your toolkit alongside multimeters and clamp meters, not in a separate bulky case that stays in the van.

Integrated Filtration Protects Your Calibration Standards

The ADT992 includes built-in port filters that protect both your pump and your precision calibration instruments:

• Standard port: 150μm quick-removal filter prevents contamination entering your reference gauge or calibrator
• Pump air intake port: 100μm quick-removal filter protects internal components from dust and debris
• Pressure outlet: 150μm quick-release filter ensures clean pressure delivery to your device under test

These filters are critical when working in dusty industrial environments, mining facilities, or outdoor installations where airborne contamination would otherwise compromise measurement accuracy or damage sensitive instruments. The quick-removal design means you can clean or replace filters on-site without tools.

Hand-Tight Quick Connectors: Faster Workflows, No Tools Required

Every model includes the ADT100-X-FNG female quick connector for your device under test (DUT), with configurations available in 1/4NPT, 1/2NPT, 1/4BSP, 1/2BSP, or M20X1.5 to match your specific equipment. The hand-tight design means you can swap between different instruments without reaching for spanners – critical when you’re rotating through multiple calibration points or testing several devices in succession.

When you’re working through a calibration schedule with 15 pressure transmitters to verify, these seconds per connection add up to significant time savings across your day.

Materials and Construction: Built for Australian Industrial Environments

The ADT992 uses stainless steel ram/adapters and a combination SS/aluminium body construction with Buna-N, PTFE, and Copper Alloy seals – materials selected for durability, chemical resistance, and reliable performance across diverse Australian conditions.

Whether you’re working in tropical Queensland humidity, dry inland mining facilities, coastal industrial plants with salt air, or temperature-controlled metropolitan facilities, the custom-machined components maintain leak-free operation. The robust construction withstands the inevitable knocks from being transported between sites, dropped in toolboxes, or used on vibrating equipment platforms.

Applications Across Australian Industrial and Trade Sectors

HVAC & Refrigeration Technicians: Verify pressure switches on commercial HVAC systems, test refrigeration gauges, calibrate building automation pressure sensors. The vacuum capability handles negative pressure differential switches common in HVAC applications.

Industrial Maintenance Teams: Routine calibration of pneumatic pressure transmitters, compressed air gauges, process control instruments, and safety devices. The multi-position capability handles installations in machinery bays, overhead piping, or confined equipment rooms.

Calibration Technicians: On-site verification services, field calibrations, and workshop instrument testing up to 50 bar. Pair with your Additel pressure calibrator or reference gauge for complete NATA-traceable pressure calibration capability.

Compressed Air System Specialists: Testing and verification of compressor pressure switches, airline pressure gauges, and pneumatic control equipment across manufacturing facilities, workshops, and industrial plants.

Instrumentation Engineers: Commissioning new pressure instruments, verifying process control transmitters, and maintaining measurement accuracy for compliance reporting. The stable pressure generation and fine adjustment support precise calibration procedures required for audit documentation.

Test & Measurement Professionals: Pressure instrument audits, pre-calibration checks, equipment verification, and compliance testing for quality management systems. The 1-year warranty and available maintenance kit support long-term accuracy and reliability.

What’s Actually Included: Complete Calibration Kit

The ADT992 arrives ready for professional calibration work:

• ADT992 handheld pneumatic pressure pump with your selected pressure port type
• Female quick connector for DUT connection (specified by your port configuration)
• 20 x O-rings for maintenance and seal replacement
• Flexible pressure hose (maximum pressure rating: 630 bar)
• Built-in port filters (standard port, pump intake, pressure outlet)

ADT992-X-SET models additionally include a carrying case for protected transport between job sites.

Optional Accessories for Extended Capability

ADT102 Adapter Set: 25-piece kit with 1/4NPT male adapters to various male and female connections – covers the majority of pressure instrument fittings you’ll encounter across different manufacturers.

ADT103 Quick Connector Set: 10-piece kit with hand-tight quick connectors in multiple configurations (1/2NPT, 1/4BSP, 1/2BSP, M20X1.5) – enables rapid connection to diverse pressure equipment without thread compatibility concerns.

9901-992 Carrying Case: Protective case for one ADT992 pump – safeguards your equipment during transport and provides organized storage.

ADT992/993-MK Maintenance Kit: Replacement seals, O-rings, and service components for long-term pump maintenance – maintains performance and extends operational life.

Model Selection Guide: Choose Your Pressure Port Configuration

The ADT992 is available with different pressure port types to match your existing equipment and regional standards:

• ADT992-N: 1/4NPT female port (common in Australia, North America)
• ADT992-N2: 1/2NPT female port (larger bore for higher flow applications)
• ADT992-B: 1/4BSP female port (British Standard Pipe, common in older Australian industrial equipment)
• ADT992-B2: 1/2BSP female port
• ADT992-M: M20X1.5 female port (metric thread, common in European-manufactured equipment)

If you work across facilities with mixed equipment standards, consider the ADT103 quick connector accessory set for maximum versatility.

Australian Supply with Calibration Support

We understand Australian calibration professionals need more than just equipment – you need traceable certification, responsive support, and confidence that your tools meet compliance requirements. Our Australian stock ensures fast delivery, while our calibration capabilities provide NATA-traceable certification when required for your quality management systems.

Whether you’re maintaining instruments to AS 2593 (boiler pressure vessel standards), supporting AS/NZS 3788 (pressure equipment compliance), or documenting calibrations for ISO 9001 quality systems, we understand the certification and traceability requirements Australian professionals face.

Why Choose the Additel ADT992?

Efficiency: Dual-stage design with lever pressurization generates pressure 40% faster than conventional hand pumps with significantly less physical effort.

Versatility: 95% vacuum to 700 psi (50 bar) range covers pneumatic transmitters, compressed air gauges, HVAC pressure switches, vacuum instruments, and general industrial pressure calibration requirements.

Precision: 10 Pa (0.1 mbar) adjustment resolution with 7.2 ml fine adjustment volume enables exact calibration point targeting.

Stability: Lever mechanism provides superior pressure stability compared to screw-type hand pumps – critical for recording accurate calibration readings.

Portability: 1.6 kg weight and compact dimensions suit daily field use without toolkit bulk or transport hassles.

Durability: Stainless steel and aluminium construction with engineered seals ensures leak-free operation across diverse Australian industrial environments.

Protection: Integrated 100-150μm port filters protect both your calibration standards and the pump from contamination damage.

Flexibility: Multi-position operation (horizontal, vertical, tilted) handles real-world installation constraints and confined workspace limitations.

Ready for Professional-Grade Pressure Calibration?

Whether you’re conducting routine instrument verifications, commissioning new pressure equipment, or maintaining critical process instrumentation, the Additel ADT992 delivers the portable pressure generation capability modern calibration work demands. Fast pressure generation, precise control, genuine vacuum capability, and the reliability Australian trade professionals expect – backed by local stock and calibration support.

Technical Specifications

Note: Specifications based on Additel manufacturer documentation. Confirm requirements for critical applications.

The post Additel ADT992 Pneumatic Pressure Pump | 50 Bar Calibration appeared first on rapid-tech.

• 0 – 100 PSI (7 Bar) (including and not limited to an inch of water)
• Connections (2 ports) 1/8″ NPT/BSP
• Weight – 1 lb
• Made in the USA

Magnum Pro MP-P Features:

• Delrin® Plastic handle prevents body heat transfer
• Oversized check valves for smooth controlled operation
• Mash proof vent valve (No Needle Valve)
• A patented non-oil based lubricant is used on all moving parts
• Dual O-Rings on all pistons to ensure zero leakage
• Recessed vent knob to prevent damage from dropping
• 2 year warranty

Points to Remember:

• Insure that all gauges and Instruments to be callbrated are dis· connected from process pressures prior to connecting
  the pump. The maximum pump design pressure for both the MP·P and MP·V Is 150 pslg.
• Connection to a pressure source greater than 150 pslg could cause serious Injury to person or damage to the pump.
• The fittings and tubing on both the MP·P and MP·V are unique. To reattach tubing to any fittin& heat the tubing end
  with a heat gun or boiling water to soften the material. Then put the tubing onto the fitting with a twisting motion.
• For best results, operate either pump with the vernier turned the mid position.

Magnum Pro MP-P Models

• MP-P
• MP-P + HK-1: adds a 2ft non-stretch hose kit w/ fittings for side port.
• MP-PKT: includes Pump, a black padded canvas case embroidered with orange thread, 2ft non-stretch hose, fittings and Winchester Engineering M-2 stainless steel 2” analog gauge w/ protective rubber boot.*
• MP-PKT-FIT: includes everything in the MP-PKT plus FasTest universal quick connect kit and coupler for Swagelok tube fittings.*
• MP-PRK: Rebuild Kit for MP-P

The post Magnum Pro MP-P Pressure Calibration Pump appeared first on rapid-tech.

MAGNUM PRO MVP-600 Specifications:

• Vacuum 28″Hg to pressure 600psi (combination pump)
• Compatible with all gauges and calibrators
• Connections (2 ports) 1/4″ and 1/8″ NPT/BSP
• Weight – 2lbs
• Similar to Fluke 700PTP-1 Pneumatic Test Pump
• Made in the USA

MAGNUM PRO MVP-600 Features:

• Contoured cushion handles
• Oversized check valve for smooth controlled operation
• Mash proof vent valve (No Needle Valve)
• A patented non-oil based lubricant is used on all moving parts
• Dual O-Rings on all pistons to ensure zero leakage
• 2 year warranty

Points to Remember:

• Insure all gauges and instruments to be calibrated are discon­nected from process pressures before connecting the
  pump. Do not exceed 600 psi (41 bar) as this is the MVP6OO’s maximum pressure.
• The MVP-600 has ‘l/8″ and ‘l/4″ BSP ports. In order to use NPT fittings, the required NPT to BSP parallel thread
  adapters need to be Installed (Adapters are Included)
• Do not use thread sealant paste or tape on the male adapters {Female adapters may be sealed with paste or tape).
  Bonded washers (Included) are required to Insure a proper seal. To seal the adapters, simply hand-tighten and snug
  up with a wrench. Do not over-tighten.
• The MVP-600 utilizes a Schrader valve instead of a needled valve. Thus full open or closed is several turns from the end of the travel. Over-tightening does not increase the seal.

MAGNUM PRO MVP-600 Models

• MVP-600: Standalone.
• MVP-600KT: includes Pump, a black padded canvas case embroidered with orange thread, 2ft non-stretch hose, fittings, additional rubber bonded washers and (2) adaptors.*
• MVP-600WIN: includes everything in the MVP-600KT plus Winchester Engineering Model 1 Auto Ranging Digital Gauge™ w/ N.I.S.T. certification and versatile hook.*
• MVP-600WIN-FIT: includes everything in the MVP-600WIN plus FasTest universal quick connect kit and coupler for Swagelok tube fittings.*
• MVP-600RK: Rebuild Kit for MVP-600 (includes: Bonded Washers, O-Rings, a Schrader Valve, a X-Ring, a Pressure Valve Spring, a Vacuum Valve Spring, a Ring Retain Clip, a Plug Shorty, Krytox High Performance Grease – GPL215, GPL226)

The post MAGNUM PRO MVP-600 Pneumatic Calibration Hand Pump appeared first on rapid-tech.

MAGNUM PRO M-10 Specifications:

• 0 – 10,000 PSI (700 Bar)
• Compatible with most hydraulic fluids, oils and water
• Connections (2 ports) 1/4″ NPT/BSP
• Weight – 3 lbs
• Similar to the Fluke 700HTP-2
• Made in the USA

MAGNUM PRO M-10 Features:

• Contoured cushion handles
• Patented protective cage around vent knob
• Priming feature
• Patented triple filtration (prevents pump failure caused by dirt)
• A non-oil based lubricant is used on all moving parts
• Built in pressure relief valve (prevents over pressurizing)
• Shatter proof reservoir
• Oversized check valves for smooth controlled operation
• 2 year warranty

Points to Remember:

• Do not exceed maximum pressure of 10,000 psi (700 bar).
• In order to use NPT fittings, the required NPT to BSP Parallel thread adapters need to be installed (adapters included).
• Do not use thread sealant paste or tape on the male adapters {Paste or tape may be used on female adapters).
• Bonded washers (included) are required to insure a proper seal. To seal the adapters, simply hand-tighten and snug up with a wrench. Do not over-tighten.
• Use with distilled water or mineral-based hydraulic oil.

MAGNUM PRO M-10 Models

• M-10: standalone
• M-10KT: includes M-10 with hydraulic pump, 3ft high pressure hose, fittings, protective carrying case, 3 filters, test point, and fluid bottle
• M-10WIN: includes M-10 w/Winchester Engineering Model 1 Auto Ranging Digital Gauge™ (vacuum to 3K PSI)
• M-10WIN-FIT: includes everything in the M-10WIN plus FasTest universal quick connect kit and coupler for Swagelok tube fittings

The post MAGNUM PRO M-10 Hydraulic Calibration Pump appeared first on rapid-tech.