The MI3136 is already a serious instrument — 12 tests, a modern touch screen, AS/NZS 3017 preset limits, and Metrel Cloud reporting built in from day one. But when you order the standard unit, you’ll need to source a carry bag and a few essential accessories separately before it’s fully field-ready.

The MI3136 Kit solves that in one order. Everything ships together — the instrument plus the five accessories that experienced electricians reach for first — at a combined price that’s noticeably lower than buying them individually. For contractors equipping a new van, a new employee, or replacing a worn-out kit, this is the straightforward option.

What’s in the Kit — and Why Each Item Matters

A1551 Large Padded Carry Bag for XC/XD

The MI3136 doesn’t include a carry bag in its standard set, and an instrument costing close to $2,000 deserves proper protection in transit. The A1551 is sized for the MI3136 and its full accessory complement — probes, leads, clips, and adapters all stored together, protected, and organised. Whether it’s going in a van, onto a work site elevator, or into a panel room, a padded bag is not a luxury — it’s practical asset protection.

A1401 Remote Probe for XC/XD

Think of this as the equivalent of a Fluke TP165x for the Metrel system. The A1401 Remote Probe extends your reach into distribution boards, ceiling-mounted outlets, back-of-panel terminals, and tight cabinet spaces where your standard test probes physically won’t fit or can’t be held safely. On any commercial or industrial site with recessed switchgear, this probe earns its place in the first hour on the job.

A1195 Resistor Box

The Resistor Box enables verification of your RCD test results and continuity measurements using a known reference resistance — important for confidence-checking your instrument’s readings when fault-finding produces unexpected results. It’s also relevant for demonstrating traceability when your test reports are scrutinised by a building inspector or compliance auditor.

A1012 Trailing Lead — 4 m Green

While the MI3136’s socket test function works without a trailing lead for standard outlet verification, a 4 m green trailing lead is essential for earthing continuity tests back to a known earth reference — particularly on dead installation testing where the socket circuit isn’t yet energised. It also extends your reach for PE bonding measurements across larger floor areas. Green is the correct colour coding for earth connections under Australian wiring rules.

MD-106 Non-Contact Voltage Detector

Before you plug your probe into anything, you need to know whether it’s live. The MD-106 is a simple, reliable non-contact voltage detector that adds a critical layer of personal safety to every site visit. It’s the first thing you pick up and the last thing you put down — and having it paired with your installation tester from day one reinforces safe working practice.

Everything Else Stays the Same

The instrument in the MI3136 Kit is identical to the standard MI3136:

• 12 installation tests covering every mandatory function under AS/NZS 3017
• 4.3-inch colour TFT touch screen with Pass/Fail evaluation
• Socket testing without a trailing lead
• Auto-Sequences (up to 6 tests per push-button sequence)
• Real-time monitoring of all three voltages simultaneously
• Built-in fuse tables for automatic loop impedance evaluation
• Bluetooth + Wi-Fi + USB Type-C connectivity
• Metrel Cloud and Metrel ES Manager BASIC licence included
• Optional A-1532XA EVSE Adapter for EV charging station testing
• 600 V CAT III / 300 V CAT IV overvoltage rating

For full technical specifications, see the Metrel MI3136 product page.

Technical Specifications

Full instrument specifications are identical to the MI3136 standard set. See the MI3136 product page for the complete specification table.

AEO Answer Blocks

What’s the difference between the Metrel MI3136 and the MI3136 Kit?

The MI3136 Kit contains the same MI3136 InstalTest COMBO XC instrument as the standard set, plus five field accessories: an A1551 Large Padded Carry Bag, an A1401 Remote Probe, an A1195 Resistor Box, an A1012 4 m Green Trailing Lead, and an MD-106 Non-Contact Voltage Detector. The standard MI3136 does not include a carry bag or these accessories. The Kit is priced at $2,590 + GST vs $1,990 + GST for the standard unit.

Is the MI3136 Kit better value than buying accessories separately?

Yes. The MI3136 Kit is priced below the total cost of the MI3136 plus the five included accessories purchased individually. The combined saving is approximately $166 + GST, with the added convenience of a single order and everything arriving together ready for immediate deployment.

What is the A1401 Remote Probe used for?

The A1401 Remote Probe is a handheld probe that extends the MI3136’s reach into locations that standard probes can’t easily access — distribution board terminals, recessed socket outlets, ceiling-mounted GPOs, and equipment cabinet connection points. It functions similarly to the Fluke TP165x and is particularly useful on commercial and industrial installations where testing at panel-mounted connections is part of the scope.

Why does the MI3136 need a trailing lead if it can test sockets without one?

The MI3136’s no-trailing-lead socket test covers outlet verification — earth continuity, polarity, and correct connections at the socket face. A trailing lead (A1012) is still needed for dead installation testing (where circuits aren’t yet energised), earth continuity measurements back to a reference point, and PE bonding verification across longer distances. The 4 m green lead in the kit covers these scenarios.

The post Metrel MI3136 Kit InstalTest COMBO XC — Advanced Set with Bag & Accessories appeared first on rapid-tech.

Every licensed electrician knows the problem. You show up to a new build or a periodic inspection and you’re lugging a multimeter, an insulation tester, an RCD tester, a loop impedance tester, and a phase sequence tester — all needing their own cables, batteries, and firmware. Then come the reports. Handwritten notes, manually assembled spreadsheets, chasing down job numbers at the end of the week.

The Metrel MI3136 InstalTest COMBO XC was designed to fix exactly that. It replaces those five instruments with a single touch-screen unit that runs 12 distinct tests, stores your results, and produces professional PDF reports — ready to hand to a client or file for compliance records. This is what it looks like when Metrel takes a decade of installation testing experience and rebuilds it from the ground up for today’s electrical trades.

Built for AS/NZS 3017 Compliance from Day One

Australian installation testing isn’t optional — and neither is accuracy. The MI3136 has Pass/Fail limits preset to AS/NZS 3017, so there’s no second-guessing whether a loop impedance result actually passes or whether you need to cross-reference a fuse table manually. The built-in fuse tables handle that evaluation automatically based on the selected area group. Built-in help screens give on-site guidance when you need it, without pulling out a manual.

For initial verification and periodic inspection of low-voltage TT and TN systems — the bread and butter of residential and commercial electrical work under AS/NZS 3000 — the MI3136 covers every mandatory test:

• Continuity at 200 mA (for earth resistance and equipotential bonding) and 7 mA (for general resistance)
• Insulation resistance at 50V, 100V, 250V, 500V, and 1000V test voltages
• RCD testing — trip time and trip current for 10 mA through 1000 mA, with 0° and 180° starting polarity
• Fault loop impedance (L-PE, L-L, L-N) and prospective short-circuit current
• Line impedance
• Phase sequence and rotation
• Live socket testing — earth continuity, polarity, and correct connections, Pass/Fail without a trailing lead
• Earth resistance (3-wire measurement)
• Voltage and frequency measurement to 550 V / 499.9 Hz
• Contact voltage

All results display on a 4.3-inch colour TFT touch screen with real-time monitoring of all three voltages simultaneously. Automatic polarity reversal on continuity keeps testing moving without manual reset.

Sockets in Seconds — No Trailing Lead Required

One of the most time-consuming aspects of socket testing on larger jobs is running trailing leads across a floor or down a hallway for every outlet. The MI3136 eliminates that step entirely. Its socket test function checks earth continuity, polarity, and correct connections in a single push-button operation — directly from the socket, no trailing lead needed.

Combine that with Auto-Sequences that chain up to six individual tests into one push-button sequence, and high-volume socket testing on large residential or commercial installations becomes significantly faster. Auto-sequences can be configured for standard installation verification workflows, or customised for specific job types — RCD-heavy commercial work, new subdivision wiring, or periodic inspections under a specific test regime.

Record, Report, and Move On

Paper-based test records are a liability. A missed entry, an illegible reading, or a misfiled result creates compliance exposure you don’t want. The MI3136 stores test results internally and connects via Wi-Fi and Bluetooth to Metrel Cloud — allowing you to manage test structures, upload results from the field, and generate professional PDF reports without returning to a PC first.

Back at the office or workshop, Metrel ES Manager (BASIC licence included) lets you build test structures, manage customer job histories, and produce polished reports for clients and regulators. For contractors managing multiple jobs simultaneously, the Metrel Cloud App extends this to mobile devices — giving you live visibility across active jobs.

EV Charging Station Testing Ready

With EV charging infrastructure rolling out across Australian residential, commercial, and light-industrial sites, the capacity to test Mode 3 EVSE charging stations is increasingly part of an electrician’s scope of work. The MI3136 supports the optional A-1532XA EVSE Adapter, which turns the tester into a dedicated EVSE verification tool for Type 2 charging stations — performing electrical safety and functional testing from a single push button and generating compliant test reports.

Note: The A-1532XA adapter is available separately. For field technicians working on EV charging installation projects, this represents a practical capability extension without investing in a standalone EVSE tester.

Remote Probe for Difficult Access

Like the Fluke TP165x, the optional A1401 Remote Probe allows the MI3136 to reach sockets and test points in panel boards, cabinets, and ceiling-mounted outlets where the standard probe set can’t reach comfortably. This is particularly useful on large commercial or industrial sites where distribution board testing is part of the scope. The Remote Probe is included in the MI3136 Kit — or available separately.

What the MI3136 Is (and What It Isn’t)

The MI3136 is Metrel’s newest mid-range installation tester — the direct replacement for the MI3152, which is now at end of stock. It covers every mandatory installation test that Australian electricians need to perform under AS/NZS 3017, plus EV charging station verification with the optional EVSE adapter.

It’s worth being clear about one trade-off: the MI3136 does not support the extended adapter ecosystem available on the MI3155 EurotestXD. If your scope of work regularly includes luxmeter measurements (emergency lighting inspections), cable tracing with the R10K receiver, or current clamp-based earth resistance testing, the MI3155 remains the appropriate choice. The MI3136 is purpose-designed for installation verification — it does that job thoroughly, efficiently, and with professional reporting built in, at a more accessible price point.

In the Box — Standard Set

The MI3136 ships with a complete standard accessory set:

• Test probes × 3 (Brown, Blue, Green)
• Crocodile clips × 3 (Brown, Blue, Green)
• Test cable, BRN/GRN/BLU, 1.5 m
• Test cable, 1.5 m
• USB Type-C cable
• Rechargeable Li-ion battery pack (7.2 V / 5200 mAh)
• Calibration certificate
• Metrel ES Manager BASIC Licence

Note: The MI3136 standard set does not include a carry bag. For a complete field-ready kit with padded bag, remote probe, resistor box, trailing lead, and non-contact voltage detector, see the MI3136 Kit ($2,590 + GST).

Technical Specifications

What does the Metrel MI3136 replace?

The Metrel MI3136 InstalTest COMBO XC replaces five separate instruments: a multimeter, an insulation tester, an RCD tester, a loop impedance tester, and a phase sequence tester. It performs 12 distinct tests in a single portable unit and is the direct replacement for the discontinued Metrel MI3152.

---

Is the Metrel MI3136 compliant with Australian installation testing standards?

Yes. The MI3136 has Pass/Fail limits preset to AS/NZS 3017 and covers all mandatory tests required for initial verification and periodic inspection of low-voltage electrical installations under AS/NZS 3000. Built-in fuse tables automatically evaluate loop impedance results against the appropriate fuse rating for the selected area group.

---

Can the Metrel MI3136 test EV charging stations?

Yes, with the optional A-1532XA EVSE Adapter. When fitted, the MI3136 can perform electrical safety and functional verification of Mode 3 AC electric vehicle charging stations with Type 2 connectors — including single push-button EVSE test sequences and professional PDF report generation. The adapter is sold separately.

---

What is the difference between the MI3136 and the MI3155?

The MI3136 is Metrel’s mid-range installation tester, covering all mandatory tests under AS/NZS 3017 with touch-screen operation, auto-sequences, and Metrel Cloud reporting. The MI3155 EurotestXD is Metrel’s flagship industrial instrument and supports a broader adapter ecosystem — including luxmeter sensors, cable tracers (R10K receiver), current clamp accessories, and advanced TRMS measurements. The MI3136 does not accept these extended adapters. Electricians whose scope of work includes emergency lighting lux measurement, cable tracing, or current clamp-based earth resistance testing should consider the MI3155 instead.

Does the Metrel MI3136 include a carry bag?

No. The MI3136 standard set does not include a carry bag. A soft padded bag (A1289) and a large padded bag (A1551) are available as optional accessories. The MI3136 Kit includes the A1551 Large Padded Carry Bag plus a Remote Probe, Resistor Box, 4 m Green Trailing Lead, and Non-Contact Voltage Detector as a ready-to-field bundle.

---

Can the MI3136 test sockets without a trailing lead?

Yes. The MI3136’s socket test function verifies earth continuity, correct polarity, and correct wiring connections directly from the socket outlet — without requiring a trailing lead. This is combined with Push-button Auto-Sequences (up to 6 tests per sequence) to enable fast, high-volume socket verification on residential and commercial installations.

---

What reporting software does the Metrel MI3136 use?

The MI3136 includes Metrel ES Manager BASIC, which enables test structure creation, result management, and professional PDF report generation via PC. Wi-Fi and Bluetooth connectivity allow direct upload to Metrel Cloud Storage (optional licence), with the Metrel Cloud App providing mobile access for field-based job management. Advanced reporting functionality is available with the MESM PRO licence upgrade.

The post Title: Metrel MI3136 InstalTest COMBO XC — Multifunction Installation Tester Australia appeared first on rapid-tech.

Looking for an easy-to-use, reliable multifunction installation tester? The Megger MFT1815 is the perfect choice for electricians working on domestic, commercial, and industrial low-voltage electrical installations. Designed for accuracy, durability, and efficiency, this entry-level tester helps you ensure compliance with IEC 60364 standards while saving time on testing.

Key Features of the Megger MFT1815

Rugged and Durable Design (IP54 Rated)

The Megger MFT1815 is built to last with an IP54-rated casing that protects against dust and moisture. Whether you’re working on outdoor electrical installations or at a busy construction site, this tester is designed to perform in tough conditions.

Non-Trip Loop Testing

Safely test RCD-protected circuits without tripping the mains supply. The MFT1815 allows for two-wire and three-wire loop testing, making it both efficient and non-disruptive during inspections.

Intuitive and Easy-to-Use Interface

With its large backlit display, colour-coded rotary controls, and digital/analogue arc display, the MFT1815 simplifies test selection and reduces errors. The dual display shows fluctuating values alongside precise digital readings, making it easy to interpret your test results.

Enhanced Safety Features

Safety is a priority with the Megger MFT1815. It is rated to EN61010 CAT IV 300V standards, ensuring protection for high-energy systems. Additional safety features include full input protection and visible/audible alerts for hazardous voltages, keeping you and your device safe during use.

Why Choose the Megger MFT1815 Multifunction Tester?

The Megger MFT1815 is one of the best multifunction testers for electricians looking for a dependable, user-friendly solution. Key benefits include:

• Affordable entry-level option in the MFT1800 series.
• Durable IP54-rated build for tough environments.
• Non-trip loop testing for safe and efficient circuit checks.
• Simple interface for fast and error-free testing.

Built for Any Job

From small domestic electrical systems to larger commercial and industrial installations, the MFT1815 is designed to handle it all. Its portable and robust design, combined with essential safety features, makes it the trusted choice for professional electricians.

Order the Megger MFT1815 Today!

Get the Megger MFT1815 multifunction installation tester and enjoy a reliable, durable, and easy-to-use solution for your electrical testing needs. Perfect for verifying fixed wiring systems and ensuring compliance with electrical standards, this tester is a must-have for professionals.

Buy now and experience the performance, safety, and convenience of the Megger MFT1815!

The post Megger MFT1815 Multifunction Installation Tester | CAT IV Safety | Two-Wire Non-Trip Loop Testing appeared first on rapid-tech.

The Megger MET1000 All-in-One True RMS electrical tester combines functionality and practicality to meet the demanding needs of electrical professionals.

This comprehensive device provides an accurate and reliable solution for measuring voltage and current in various environments, including commercial, industrial, and domestic settings.

Crafted with user convenience in mind, the MET1000 features a detachable test lead system and easy-to-read LED and LCD displays, ensuring that both seasoned electricians and electrical engineers have a robust handheld tool at their disposal.

Key Features

• Versatile Voltage and Current Measurement: Capable of measuring AC/DC voltage up to 1000 V and providing 200 A AC current measurements, the MET1000 is designed for everyday use. Whether you are troubleshooting electrical systems or conducting routine maintenance, this tester is indispensable.
• True RMS Measurements: The MET1000 excels in providing True RMS readings for AC voltage and current, ensuring that users attain accurate measurement results even in non-linear power systems.
• Robust and Durable Design: Rated CAT IV 600 V and CAT III 1000 V, the MET1000 is built to withstand harsh working conditions. Its IP65 rating further enhances its durability, making it suitable for use in challenging environments. The instrument’s protective finger guard and ergonomic design help ensure user safety at all times.
• Enhanced Functionality: The tester features auto-ranging voltage measurement, phase rotation testing, and a single pole voltage test, which are critical for efficient electrical diagnostics. Additionally, the built-in current clamp simplifies AC current measurements, enabling professionals to work quickly and effectively.
• Safety Features: Equipped with a bright LED torch, the MET1000 aids in working safely in low-light conditions. GS38 shrouds are included to ensure compliance with the latest safety standards, further solidifying the instrument’s suitability for professional use.
• Easy Storage and Portability: The MEGGER MET1000 comes with a carrying holster and incorporates easy-to-use probe mounts on the rear, ensuring that your workspace remains organised and your tools protected.

Why Choose the Megger MET1000?

Investing in the Megger MET1000 All-in-One True RMS electrical tester means choosing reliability and efficiency.

This instrument reduces the need for multiple testers, streamlining your toolkit. With an intuitive design and comprehensive safety features, it enhances user confidence and performance on the job.

Whether you’re conducting electrical inspections, performing installations, or troubleshooting, the MET1000 is a powerful ally that delivers accurate results.

Specifications Summary

• Electrical Measurement Categories: CAT III 1000 V, CAT IV 600 V
• Voltage Measuring Range (AC): 6.0 – 999.9 V (with batteries), 45 V – 999.9 V (without batteries)
• Voltage Measuring Range (DC): 7.0 – 999.9 V (with batteries), 45 V – 999.9 V (without batteries)
• AC Current Measurement: Up to 200 A

Conclusion

Choose the Megger MET1000 All-in-One True RMS electrical tester for a dependable and multifunctional tool that meets the challenges of today’s electrical testing demands.

Its combination of advanced features, safety measures, and durable construction makes it an essential addition to any professional electrician’s toolkit. Visit our website to learn more and purchase yours today.

The post Megger MET1000 All-in-One True RMS Electrical Tester – Accurate Voltage & AC Current Measurement appeared first on rapid-tech.