The MI3136 is already a serious instrument — 12 tests, a modern touch screen, AS/NZS 3017 preset limits, and Metrel Cloud reporting built in from day one. But when you order the standard unit, you’ll need to source a carry bag and a few essential accessories separately before it’s fully field-ready.

The MI3136 Kit solves that in one order. Everything ships together — the instrument plus the five accessories that experienced electricians reach for first — at a combined price that’s noticeably lower than buying them individually. For contractors equipping a new van, a new employee, or replacing a worn-out kit, this is the straightforward option.

What’s in the Kit — and Why Each Item Matters

A1551 Large Padded Carry Bag for XC/XD

The MI3136 doesn’t include a carry bag in its standard set, and an instrument costing close to $2,000 deserves proper protection in transit. The A1551 is sized for the MI3136 and its full accessory complement — probes, leads, clips, and adapters all stored together, protected, and organised. Whether it’s going in a van, onto a work site elevator, or into a panel room, a padded bag is not a luxury — it’s practical asset protection.

A1401 Remote Probe for XC/XD

Think of this as the equivalent of a Fluke TP165x for the Metrel system. The A1401 Remote Probe extends your reach into distribution boards, ceiling-mounted outlets, back-of-panel terminals, and tight cabinet spaces where your standard test probes physically won’t fit or can’t be held safely. On any commercial or industrial site with recessed switchgear, this probe earns its place in the first hour on the job.

A1195 Resistor Box

The Resistor Box enables verification of your RCD test results and continuity measurements using a known reference resistance — important for confidence-checking your instrument’s readings when fault-finding produces unexpected results. It’s also relevant for demonstrating traceability when your test reports are scrutinised by a building inspector or compliance auditor.

A1012 Trailing Lead — 4 m Green

While the MI3136’s socket test function works without a trailing lead for standard outlet verification, a 4 m green trailing lead is essential for earthing continuity tests back to a known earth reference — particularly on dead installation testing where the socket circuit isn’t yet energised. It also extends your reach for PE bonding measurements across larger floor areas. Green is the correct colour coding for earth connections under Australian wiring rules.

MD-106 Non-Contact Voltage Detector

Before you plug your probe into anything, you need to know whether it’s live. The MD-106 is a simple, reliable non-contact voltage detector that adds a critical layer of personal safety to every site visit. It’s the first thing you pick up and the last thing you put down — and having it paired with your installation tester from day one reinforces safe working practice.

Everything Else Stays the Same

The instrument in the MI3136 Kit is identical to the standard MI3136:

• 12 installation tests covering every mandatory function under AS/NZS 3017
• 4.3-inch colour TFT touch screen with Pass/Fail evaluation
• Socket testing without a trailing lead
• Auto-Sequences (up to 6 tests per push-button sequence)
• Real-time monitoring of all three voltages simultaneously
• Built-in fuse tables for automatic loop impedance evaluation
• Bluetooth + Wi-Fi + USB Type-C connectivity
• Metrel Cloud and Metrel ES Manager BASIC licence included
• Optional A-1532XA EVSE Adapter for EV charging station testing
• 600 V CAT III / 300 V CAT IV overvoltage rating

For full technical specifications, see the Metrel MI3136 product page.

Technical Specifications

Full instrument specifications are identical to the MI3136 standard set. See the MI3136 product page for the complete specification table.

AEO Answer Blocks

What’s the difference between the Metrel MI3136 and the MI3136 Kit?

The MI3136 Kit contains the same MI3136 InstalTest COMBO XC instrument as the standard set, plus five field accessories: an A1551 Large Padded Carry Bag, an A1401 Remote Probe, an A1195 Resistor Box, an A1012 4 m Green Trailing Lead, and an MD-106 Non-Contact Voltage Detector. The standard MI3136 does not include a carry bag or these accessories. The Kit is priced at $2,590 + GST vs $1,990 + GST for the standard unit.

Is the MI3136 Kit better value than buying accessories separately?

Yes. The MI3136 Kit is priced below the total cost of the MI3136 plus the five included accessories purchased individually. The combined saving is approximately $166 + GST, with the added convenience of a single order and everything arriving together ready for immediate deployment.

What is the A1401 Remote Probe used for?

The A1401 Remote Probe is a handheld probe that extends the MI3136’s reach into locations that standard probes can’t easily access — distribution board terminals, recessed socket outlets, ceiling-mounted GPOs, and equipment cabinet connection points. It functions similarly to the Fluke TP165x and is particularly useful on commercial and industrial installations where testing at panel-mounted connections is part of the scope.

Why does the MI3136 need a trailing lead if it can test sockets without one?

The MI3136’s no-trailing-lead socket test covers outlet verification — earth continuity, polarity, and correct connections at the socket face. A trailing lead (A1012) is still needed for dead installation testing (where circuits aren’t yet energised), earth continuity measurements back to a reference point, and PE bonding verification across longer distances. The 4 m green lead in the kit covers these scenarios.

The post Metrel MI3136 Kit InstalTest COMBO XC — Advanced Set with Bag & Accessories appeared first on rapid-tech.

Every licensed electrician knows the problem. You show up to a new build or a periodic inspection and you’re lugging a multimeter, an insulation tester, an RCD tester, a loop impedance tester, and a phase sequence tester — all needing their own cables, batteries, and firmware. Then come the reports. Handwritten notes, manually assembled spreadsheets, chasing down job numbers at the end of the week.

The Metrel MI3136 InstalTest COMBO XC was designed to fix exactly that. It replaces those five instruments with a single touch-screen unit that runs 12 distinct tests, stores your results, and produces professional PDF reports — ready to hand to a client or file for compliance records. This is what it looks like when Metrel takes a decade of installation testing experience and rebuilds it from the ground up for today’s electrical trades.

Built for AS/NZS 3017 Compliance from Day One

Australian installation testing isn’t optional — and neither is accuracy. The MI3136 has Pass/Fail limits preset to AS/NZS 3017, so there’s no second-guessing whether a loop impedance result actually passes or whether you need to cross-reference a fuse table manually. The built-in fuse tables handle that evaluation automatically based on the selected area group. Built-in help screens give on-site guidance when you need it, without pulling out a manual.

For initial verification and periodic inspection of low-voltage TT and TN systems — the bread and butter of residential and commercial electrical work under AS/NZS 3000 — the MI3136 covers every mandatory test:

• Continuity at 200 mA (for earth resistance and equipotential bonding) and 7 mA (for general resistance)
• Insulation resistance at 50V, 100V, 250V, 500V, and 1000V test voltages
• RCD testing — trip time and trip current for 10 mA through 1000 mA, with 0° and 180° starting polarity
• Fault loop impedance (L-PE, L-L, L-N) and prospective short-circuit current
• Line impedance
• Phase sequence and rotation
• Live socket testing — earth continuity, polarity, and correct connections, Pass/Fail without a trailing lead
• Earth resistance (3-wire measurement)
• Voltage and frequency measurement to 550 V / 499.9 Hz
• Contact voltage

All results display on a 4.3-inch colour TFT touch screen with real-time monitoring of all three voltages simultaneously. Automatic polarity reversal on continuity keeps testing moving without manual reset.

Sockets in Seconds — No Trailing Lead Required

One of the most time-consuming aspects of socket testing on larger jobs is running trailing leads across a floor or down a hallway for every outlet. The MI3136 eliminates that step entirely. Its socket test function checks earth continuity, polarity, and correct connections in a single push-button operation — directly from the socket, no trailing lead needed.

Combine that with Auto-Sequences that chain up to six individual tests into one push-button sequence, and high-volume socket testing on large residential or commercial installations becomes significantly faster. Auto-sequences can be configured for standard installation verification workflows, or customised for specific job types — RCD-heavy commercial work, new subdivision wiring, or periodic inspections under a specific test regime.

Record, Report, and Move On

Paper-based test records are a liability. A missed entry, an illegible reading, or a misfiled result creates compliance exposure you don’t want. The MI3136 stores test results internally and connects via Wi-Fi and Bluetooth to Metrel Cloud — allowing you to manage test structures, upload results from the field, and generate professional PDF reports without returning to a PC first.

Back at the office or workshop, Metrel ES Manager (BASIC licence included) lets you build test structures, manage customer job histories, and produce polished reports for clients and regulators. For contractors managing multiple jobs simultaneously, the Metrel Cloud App extends this to mobile devices — giving you live visibility across active jobs.

EV Charging Station Testing Ready

With EV charging infrastructure rolling out across Australian residential, commercial, and light-industrial sites, the capacity to test Mode 3 EVSE charging stations is increasingly part of an electrician’s scope of work. The MI3136 supports the optional A-1532XA EVSE Adapter, which turns the tester into a dedicated EVSE verification tool for Type 2 charging stations — performing electrical safety and functional testing from a single push button and generating compliant test reports.

Note: The A-1532XA adapter is available separately. For field technicians working on EV charging installation projects, this represents a practical capability extension without investing in a standalone EVSE tester.

Remote Probe for Difficult Access

Like the Fluke TP165x, the optional A1401 Remote Probe allows the MI3136 to reach sockets and test points in panel boards, cabinets, and ceiling-mounted outlets where the standard probe set can’t reach comfortably. This is particularly useful on large commercial or industrial sites where distribution board testing is part of the scope. The Remote Probe is included in the MI3136 Kit — or available separately.

What the MI3136 Is (and What It Isn’t)

The MI3136 is Metrel’s newest mid-range installation tester — the direct replacement for the MI3152, which is now at end of stock. It covers every mandatory installation test that Australian electricians need to perform under AS/NZS 3017, plus EV charging station verification with the optional EVSE adapter.

It’s worth being clear about one trade-off: the MI3136 does not support the extended adapter ecosystem available on the MI3155 EurotestXD. If your scope of work regularly includes luxmeter measurements (emergency lighting inspections), cable tracing with the R10K receiver, or current clamp-based earth resistance testing, the MI3155 remains the appropriate choice. The MI3136 is purpose-designed for installation verification — it does that job thoroughly, efficiently, and with professional reporting built in, at a more accessible price point.

In the Box — Standard Set

The MI3136 ships with a complete standard accessory set:

• Test probes × 3 (Brown, Blue, Green)
• Crocodile clips × 3 (Brown, Blue, Green)
• Test cable, BRN/GRN/BLU, 1.5 m
• Test cable, 1.5 m
• USB Type-C cable
• Rechargeable Li-ion battery pack (7.2 V / 5200 mAh)
• Calibration certificate
• Metrel ES Manager BASIC Licence

Note: The MI3136 standard set does not include a carry bag. For a complete field-ready kit with padded bag, remote probe, resistor box, trailing lead, and non-contact voltage detector, see the MI3136 Kit ($2,590 + GST).

Technical Specifications

What does the Metrel MI3136 replace?

The Metrel MI3136 InstalTest COMBO XC replaces five separate instruments: a multimeter, an insulation tester, an RCD tester, a loop impedance tester, and a phase sequence tester. It performs 12 distinct tests in a single portable unit and is the direct replacement for the discontinued Metrel MI3152.

---

Is the Metrel MI3136 compliant with Australian installation testing standards?

Yes. The MI3136 has Pass/Fail limits preset to AS/NZS 3017 and covers all mandatory tests required for initial verification and periodic inspection of low-voltage electrical installations under AS/NZS 3000. Built-in fuse tables automatically evaluate loop impedance results against the appropriate fuse rating for the selected area group.

---

Can the Metrel MI3136 test EV charging stations?

Yes, with the optional A-1532XA EVSE Adapter. When fitted, the MI3136 can perform electrical safety and functional verification of Mode 3 AC electric vehicle charging stations with Type 2 connectors — including single push-button EVSE test sequences and professional PDF report generation. The adapter is sold separately.

---

What is the difference between the MI3136 and the MI3155?

The MI3136 is Metrel’s mid-range installation tester, covering all mandatory tests under AS/NZS 3017 with touch-screen operation, auto-sequences, and Metrel Cloud reporting. The MI3155 EurotestXD is Metrel’s flagship industrial instrument and supports a broader adapter ecosystem — including luxmeter sensors, cable tracers (R10K receiver), current clamp accessories, and advanced TRMS measurements. The MI3136 does not accept these extended adapters. Electricians whose scope of work includes emergency lighting lux measurement, cable tracing, or current clamp-based earth resistance testing should consider the MI3155 instead.

Does the Metrel MI3136 include a carry bag?

No. The MI3136 standard set does not include a carry bag. A soft padded bag (A1289) and a large padded bag (A1551) are available as optional accessories. The MI3136 Kit includes the A1551 Large Padded Carry Bag plus a Remote Probe, Resistor Box, 4 m Green Trailing Lead, and Non-Contact Voltage Detector as a ready-to-field bundle.

---

Can the MI3136 test sockets without a trailing lead?

Yes. The MI3136’s socket test function verifies earth continuity, correct polarity, and correct wiring connections directly from the socket outlet — without requiring a trailing lead. This is combined with Push-button Auto-Sequences (up to 6 tests per sequence) to enable fast, high-volume socket verification on residential and commercial installations.

---

What reporting software does the Metrel MI3136 use?

The MI3136 includes Metrel ES Manager BASIC, which enables test structure creation, result management, and professional PDF report generation via PC. Wi-Fi and Bluetooth connectivity allow direct upload to Metrel Cloud Storage (optional licence), with the Metrel Cloud App providing mobile access for field-based job management. Advanced reporting functionality is available with the MESM PRO licence upgrade.

The post Title: Metrel MI3136 InstalTest COMBO XC — Multifunction Installation Tester Australia appeared first on rapid-tech.

Running an efficient test-and-tag operation in Australia means juggling multiple demands. You need to meet strict AS/NZS 3760 compliance requirements while maintaining productivity across diverse equipment types. Traditional testing setups often require separate devices for testing, printing labels, and managing records – turning what should be straightforward compliance work into a time-consuming administrative burden.

When you’re pricing jobs competitively and scheduling multiple sites per day, equipment downtime or complicated workflows directly impact your bottom line. Your clients expect professional documentation, rapid turnaround, and absolute confidence in test results. Meanwhile, you’re dealing with everything from basic power tools through to sensitive electronics, 3-phase equipment, and increasingly common EV charging cables – each with their own testing protocols.

The equipment you rely on needs to handle the full spectrum of Australian workplace electrical testing while keeping pace with the fast-moving demands of commercial, industrial, and residential compliance work.

A Purpose-Built Solution for Australian Electrical Safety Professionals

The Metrel MI3340 AlphaEE XA Complete Kit delivers everything needed for professional portable appliance testing in a single, integrated package. This isn’t just a tester with accessories thrown in – it’s a carefully engineered system designed around the real-world workflow of Australian test-and-tag operators.

At the heart of the kit sits the MI3340 AlphaEE XA tester, combining comprehensive AS/NZS 3760 compliance testing with an ergonomic design that redefines portable testing convenience. The lightweight housing enables genuine one-handed operation during extended testing runs, while the intuitive touchscreen interface eliminates the learning curve that slows down new operators or occasional users.

What sets this complete kit apart is the integration of professional-grade documentation tools. The included Zebra ZQ521 Bluetooth printer produces durable test tags complete with QR codes, test dates, and custom branding – all wirelessly from the tester. Pair this with the pocket-sized Socket S740 barcode scanner, and retest workflows become remarkably efficient. Simply scan the existing tag’s QR code to auto-populate equipment details and testing history, eliminating repetitive data entry and reducing testing time by up to 40%.

The system operates entirely on high-capacity Li-ion batteries – both tester and printer – giving you genuine portability across facilities, construction sites, or multi-level buildings without hunting for power outlets. When you do need to recharge, rapid charging technology gets you back to full capacity during a lunch break.

All equipment arrives secured in a heavy-duty carry case with custom foam inserts, protecting your investment during transport and providing organized storage for leads, probes, and accessories. This professional presentation extends to client interactions – arriving with organized, purpose-built equipment reinforces your expertise and attention to detail.

Comprehensive Testing Capability That Grows With Your Business

The MI3340’s testing functions cover the complete AS/NZS 3760 standard requirements, but the capability extends well beyond basic compliance. Pre-programmed AutoSequence testing protocols guide operators through the correct test sequence for different equipment types, ensuring consistency and reducing the risk of missed tests or incorrect procedures.

Core Testing Functions: Earth continuity testing at 200mA provides accurate protective conductor verification across equipment from hand tools through to industrial machinery. The Auto-start continuity function is particularly valuable when testing equipment with multiple exposed metal components – start the test, touch each point requiring verification, and the tester automatically progresses, significantly speeding up large equipment assessment.

Insulation resistance testing offers selectable voltages (50V, 100V, 250V, 500V) to safely test both robust industrial equipment and sensitive electronics without risk of damage. The lower 50V and 100V settings make the MI3340 particularly valuable for testing modern electronic devices, battery chargers, and EV-related equipment that older testers with only 250V/500V capability can damage.

Leakage current testing encompasses protective conductor current, touch current, and differential leakage measurements in both direct and alternative modes. This comprehensive approach ensures accurate results across equipment types from simple hand tools through to complex devices with floating inputs or Class II construction.

Advanced Capabilities: Active polarity testing verifies equipment requiring mains voltage for operation – essential for testing residual current devices, smart extension leads, and EV charging cables that won’t function during conventional testing. This eliminates the frustration of “can’t test” situations that delay jobs and reduce profitability.

PRCD testing support covers all portable RCD types including 2-pole, 3-pole, K/Di (varistor), and S-type devices. Combined with full RCD testing (Types A, AC, B, B+, F), the MI3340 handles specialized equipment that basic PAT testers cannot adequately verify.

IC-CPD testing capability positions your business for the growing electric vehicle market. With compatible adapters (available separately), the MI3340 tests both Mode 2 and Mode 3 EV charging cables – an increasingly valuable service as workplaces and commercial facilities adopt electric vehicle charging infrastructure.

Socket testing functionality enables comprehensive power point verification, checking mains voltage, correct L/N/PE wiring, and identifying common installation faults. This troubleshooting capability adds value during site audits and helps identify infrastructure problems before they cause equipment failures or safety incidents.

Engineered for Australian Operating Conditions

Electrical testing across Australia means working in diverse environments – from air-conditioned offices through to dusty mining sites, coastal facilities, and tropical construction zones. The MI3340’s robust construction and sealed design handle exposure to dust, humidity, and temperature variations that would degrade lesser equipment.

The color touchscreen remains clearly readable in bright outdoor conditions while offering smartphone-familiar operation that reduces training time. Physical function buttons provide backup control when working with gloves or in environments where touchscreen operation isn’t practical.

Battery performance is specifically optimized for Australian operating patterns. A single charge supports a full day’s testing across typical commercial facility schedules (150-200 appliances), while rapid recharge capability means the tester isn’t sitting idle during lunch breaks or between morning/afternoon sites. The Li-ion chemistry maintains performance across Australia’s temperature extremes, from summer heat in northern regions through to winter conditions in southern states.

Professional Documentation and Data Management

The included Metrel ES Manager PRO software license (typically a separate $600+ value) provides comprehensive data management capabilities. Create custom test sequences for specific client requirements, generate professional PDF test reports with your branding, and maintain searchable databases of equipment testing history.

The PRO license unlocks advanced features including batch report generation, custom database structures for different clients, and export capabilities for integration with asset management systems. This professional capability sets you apart from competitors using entry-level software or paper-based systems.

The Android aMESM app (free download) extends functionality to smartphones and tablets, enabling barcode scanning for rapid equipment identification and test data upload to cloud storage. Site supervisors can access real-time testing progress, while office staff can generate invoices and reports without waiting for the technician to return.

What’s Included in the Complete Kit

MI3340 AlphaEE XA Tester:

• Main testing unit with integrated Li-ion battery
• 2m mains power cable (IEC C13/Type I Australian connector)
• 1.5m test lead (black, 2.5mm²)
• Test probe (black)
• Crocodile clip (black)
• USB cable (Type A/B for PC connection)

Zebra ZQ521 Bluetooth Printer:

• Wireless thermal transfer printer
• Integrated Li-ion battery with rapid charging
• Direct thermal technology (no ink or ribbons required)
• Starter roll of test tags included

Socket S740 Barcode Scanner:

• Pocket-sized Bluetooth 2D/QR scanner
• Rapid pairing with tester and mobile devices
• Rechargeable battery with extended runtime

Professional Carry Case:

• Heavy-duty construction with reinforced corners
• Custom-cut foam inserts for secure equipment storage
• Organized compartments for leads, tags, and accessories
• Weather-resistant exterior suitable for ute or van storage

Software and Documentation:

• Metrel ES Manager PRO software license (PC)
• aMESM Android app access
• Comprehensive instruction manual (English)
• Quick reference guide
• Factory calibration certificate

Note: This complete kit is assembled specifically for the Australian market and includes everything needed to commence professional PAT testing operations immediately.

The post Metrel MI3340 PAT Tester Kit | Complete Test & Tag Solution appeared first on rapid-tech.

Introducing the Metrel MD 9070 Digital Multimeter, a state-of-the-art instrument that combines precision, reliability, and versatility to meet all your electrical measurement requirements.

With its advanced features and robust design, the MD 9070 is the perfect tool for electricians, maintenance professionals, and DIY enthusiasts. Let’s dive into the exceptional capabilities that make the MD 9070 a must-have for any electrical project.

Accurate Readings on Sinusoidal and Non-Sinusoidal Signals

The MD 9070 boasts True RMS technology, ensuring accurate readings on both sinusoidal and non-sinusoidal signals. This means you can confidently measure various types of electrical waveforms, making it ideal for applications in industrial, commercial, and residential settings.

VFD Feature for Precise Frequency Measurements

Equipped with the VFD (Variable Frequency Drive) feature, the MD 9070 can measure true values in accordance with frequency. This capability enables precise measurements in systems that rely on variable frequency drives, ensuring accurate readings even in complex electrical installations.

Auto-Ranging and Manual Ranging for Convenience

With the MD 9070, you have the flexibility to choose between auto-ranging and manual ranging modes. Auto-ranging automatically selects the appropriate range for your measurement, while manual ranging allows you to manually adjust the range based on your specific requirements. This versatility ensures ease of use and accurate results in any situation.

Relative Zero Mode for Comparative Analysis

The MD 9070 offers a unique relative zero mode, allowing you to compare the difference between signals or remove background noise for more accurate measurements. This feature is invaluable in troubleshooting electrical systems, helping you identify and isolate potential issues with enhanced precision.

MAX/MIN Recording and Data Hold Function

Recording maximum, minimum, and average values is a breeze with the MD 9070. This feature provides you with valuable data for analysis and diagnostics. Additionally, the data hold function freezes the display, allowing you to capture readings for later review and analysis, even in challenging work environments.

Comprehensive Safety Features for Peace of Mind

Safety is paramount when working with electrical systems. The MD 9070 is equipped with CAT IV / 600 V and CAT III / 1000 V overvoltage protection, ensuring your safety while working on high-voltage installations. This robust safety design provides peace of mind, allowing you to focus on the task at hand without compromising your well-being.

Backlight for Enhanced Visibility

Working in dimly lit environments is no longer a challenge with the MD 9070. The built-in backlight feature illuminates the display, ensuring excellent visibility even in low-light conditions. This enables you to work with ease, accuracy, and confidence, no matter the lighting conditions.

Applications: e-Mobility, Mobile Installations, Preventative Maintenance, Troubleshooting

The MD 9070 finds its application in a wide range of electrical tasks. For e-Mobility, it facilitates the first safety inspection of electrical vehicles according to UN ECE R100 standards. In mobile installations, such as vehicles with on-board generators or emergency response vehicles, the MD 9070 ensures the electrical systems are functioning optimally.

It is also a valuable tool for preventative maintenance tasks, including earth continuity and insulation testing, voltage measurements, and frequency measurements. Finally, during troubleshooting and field service, the MD 9070 assists in identifying and resolving installation issues promptly and efficiently.

Invest in the Metrel MD 9070 Digital Multimeter today and experience the precision, reliability, and convenience it brings to your electrical projects. Don’t compromise on accuracy and safety. Choose the MD 9070 for all your electrical measurement needs and take your work to the next level.

The post Metrel MD 9070 Digital Multimeter: Precision Electrical Measurements for Professionals appeared first on rapid-tech.

It’s the perfect tool for photovoltaic and wind plant testing, providing the accurate data you need with a range of capabilities such as TRMS AC and DC voltage/current measurement, capacitance measurement, resistance measurement, frequency measurement with VFD technology, diode test, temperature detection along with non-contact electrical field detection.

This clamp meter also offers added protection from 12 kV transients and has CAT III 1500 V DC safety rating as well as CAT IV 1000 V safety rating. With its current range reaching 2000 A., this instrument truly is an all-inclusive professional measuring solution.

Measuring functions

• TRMS AC and DC voltage
• TRMS AC and DC current
• Capacitance
• Resistance
• Frequency measurement with VFD
• Diode test;
• Temperature measurement
• Continuity
• Non-contact electrical field detection.

Key features

• 1500 V DC range with CAT III safety.
• TRMS for accurate measurement of sine and non-sine signals.
• VFD: low-pass filter for accurate frequency measurements of noisy signals.
• High current range of 2000 A.
• CAT III 1500 V DC and CAT IV 1000 V safety
• Protection against 12 kV transients.
• Auto and manual ranging.
• Relative zero: easily compare consecutive measurements.
• Crest function catches peaks as short as 5 ms.
• Temperature measurements up to 1000 °C.
• PC connection (optional): logging directly to a PC.

Technical data

• Dimensions (w x h x l): 264 x 97 x 43 mm
• Mass (without accessories): 608 g

The post Metrel MD 9260 TRMS Solar Clamp Meter – CAT III 1500 V DC appeared first on rapid-tech.

Using this powerful combination of devices, you can easily measure inrush current from MD 9273 measurement, display it in graph or table form, generate a 128 Hz signal for cable tracing purposes, and even transmit data on current, voltage, power, and harmonics when used as a remote probe.

All of this is achieved with incredible accuracy and precision – so you know that you’re always getting results that are reliable and trustworthy.

Thanks to its intuitive design and cutting-edge technology, the MD 9273 is designed for expert operators who need dependable readings quickly and efficiently. By choosing Metrel’s latest expansion for their multimeters and analysers, they’ll be well equipped with the most advanced tools available today – ready to take readings with unparalleled efficiency.

Key Features

• Bluetooth connection to InstalTest XD MI-3155 and InstalTest XC MI-3152.
• Inrush current recording with InstalTest XD MI-3155 and InstalTest XC MI-3152.
• Online measurements of current, voltage, power, current harmonics, and voltage harmonics.
• 128 Hz notch filter for cable tracing.
• TRMS: accurate measurements on sinusoidal and non-sinusoidal signals.
• Jaw size: 28 mm.
• Shielded jaw: shielded jaw allows the clamp meter to be used in the noisiest environments.
• Accurate: readings of AC current with an accuracy of 0.8 % and a base resolution of 0.01 mA and voltage with an accuracy of 0.5 % and a base resolution of 0.01 V.
• Power: measures various power parameters (active, reactive, apparent power, THD, PF, phase displacement).
• Intelligent loss analysis: complex algorithms detect loss and allow determining possible reasons for current loss.
• Harmonics: measures current or voltage harmonic components and a percentage value of a harmonic up to the 19th.
• THD and PF: dual display allows readings to be displayed along with Total Harmonic Distortion (THD) or Power Factor (PF).
• Peak value: the peak value of the waveform or crest factor can be displayed.
• MAX/MIN/HOLD mode: displays maximum, minimum or last measured value.

The post Metrel MD 9273 Bluetooth TRMS Leakage Clamp with Power Functions appeared first on rapid-tech.

Power generation

• Earthing and lightning protection in thermal energy power plants

Renewable energy sources

• Generator stator testing
• STC values and performance of PV panels
• Lightning protection testing in wind plants

Power distribution

• Insulation resistance measurement of transformer’s windings
• Insulation of long cables

Key features

• Measurement range of insulation resistance up to 10 TΩ.
• Adjustable test voltage in steps of 50 V
• (50 V … 1 kV) and 100 V (1 kV … 10 kV).
• Programmable timer.
• Capacitance measurement.
• Charging rate for capacitive load < 3 s / µF at 10 kV.
• Automatic discharge of test object after completion of measurement.
• Guard terminal.
• High voltage breakdown detection.
• Auto adjustment function.
• Measurement results in numerical and graphical form.
• PC software HVLink PRO for downloading and analysing of the test results and test report printing (optional).
• Isolated RS-232 and USB communication ports.
• High quality accessories including shielded test leads in standard set.
• High EM interferences protection: input AC current noise rejection (1 mA∞600 V) and additional averaging of the result (5, 10, 30, 60).
• CAT IV / 600 V.
• Mains and rechargeable battery power supply.

The post Metrel MI 3209 TeraOhmLT 10kV | High voltage insulation testers appeared first on rapid-tech.

All the instruments are specially designed for long-term testing, since their memory structure enables simple searching through the archive of devices and quick re-execution of (periodic) tests.

Great emphasis was put on support for peripheral devices such as printers and barcode or QR code scanners and RFID readers (in Bluetooth and wired versions). On top of that, all instrument versions are supported by our Metrel ES Manager PC software.

Metrel MI 3360 Measuring functions

• Visual inspections;
• Fuse test;
• Continuity / Protective earth resistance 200 mA;
• Continuity / Protective earth resistance 10 A, 25 A (25 A, M, F, models only);
• Insulation Resistance (Riso, Riso-S);
• Sub-Leakage Current, Substitute Leakage Current – S;
• Differential Leakage current;
• PE leakage current;
• Touch leakage current;
• Insulation resistance, IEC/EN 62353;
• Touch leakage current, IEC/EN 62353;
• Equipment leakage (direct, differential, alternative) IEC/EN 62353;
• Applied part leakage (direct, alternative), IEC/EN 62353;
• Insulation resistance (optional A 1422), IEC/EN 60974-4;
• Welding circuit leakage (optional A 1422), IEC/EN 60974-4;
• Primary leakage (optional A 1422), IEC/EN 60974-4;
• No-load voltage (optional A 1422), IEC/EN 60974-4;
• Power (P, S, Q, PF, THDu, THDi, CosØ, I, U,);
• PRCD test, (2-pole, 3-pole, K/Di (varistor), S (3-pole));
• PRCD PE probe test, PRCD open conductor test, PE conductor (PRCD) test;
• RCD test, (type A, AC, B, B+, F);
• Flash test, (1500 V, 3000 V), (F model only);
• Polarity / Active polarity test;
• Clamp current (with optional A 1579).

Key features of the Metrel MI 3360

• Touch screen: high resolution colour touch screen, 4.3” TFT.
• Double manipulation: keyboard and touch screen enable the user to control the instrument in any manner they like.
• Pre-defined AUTOSEQUENCE®s: enable the user simple and quick execution of test sequence for the chosen device.
• Read the code and test: QR and barcode system of labelling in combination with AUTOSEQUENCE®s enables the user quick and simple testing of electrical devices.
• Testing groups: the instruments have built-in filters in accordance with their area of application, which enables the user simple choice of needed test sequences.
• Support for PRCD testing: support for all types of PRCDs, including 2-pole, 3-pole, K/Di (varistor), S (3 pole) and testing with the PE probe.
• Support for RCD testing: all instruments support testing of A, AC, B, B+ and F RCDs.
• Fuse testing: the instrument has a special, integrated testing module for quick testing of all types of fuses.
• Hard-wired devices: the instruments have integrated additional test terminals that enable the user simple testing of hard-wired devices.
• High-voltage testing (only MI 3360 F): the instrument enables insulation resistance measurement that has to be performed after repairs or maintenance of electrical devices.
• Testing of medical devices (only MI 3360 M): the instrument enables testing of medical devices in accordance with IEC/EN 62353.
• Testing of welding equipment (only in combination with A 1422): all models of OmegaPAT XA support testing of welding equipment in accordance with IEC/EN 60974-4.
• Large memory: support for microSD memory cards, 8 GB card already integrated in the instrument, although that can be expanded to 32 GB.
• PC SW Metrel ES Manager: enables creation of test structures, user-defined AUTOSEQUENCE®s, professional test reports and data transfer for archiving.
• aMESM Android SW: enables QR code scanning, and uploading of pre-prepared user-defined AUTOSEQUENCE®s.

Advanced Medical Functions (M version only):

• Equipment Leakage Current (Alt., Dir., Diff.)
• Applied Part Leakage Current (Alt., Dir., Diff.)
• Touch Leakage Current (Medical)
• AUTOSEQUENCE Medical
• Medical Mode

The post Metrel MI 3360 OmegaGT XA PAT Testers appeared first on rapid-tech.

• TRMS: accurate measurements up to 100 Amps on sinusoidal and non-sinusoidal signals.
• Jaw size: 28 mm.
• Shielded Jaw: shielded jaw allows the clamp meter to be used in the noisiest environments.
• Accurate: readings of AC current with an accuracy of 0.8 % and a base resolution of 0.01 mA and voltage with an accuracy of 0.5 % and a base resolution of 0.1 V.
• Power: measures various power parameters (active, reactive, apparent power, THD, PF, phase displacement).
• Intelligent loss analysis: complex algorithms detect loss and allow determining possible reasons for current loss.
• Harmonics: measures current or voltage harmonic components and a percentage value of a harmonic up to the 19th.
• THD and PF: dual display allows readings to be displayed along with Total Harmonic Distortion (THD) or Power Factor (PF).
• Peak value: the peak value of the waveform or crest factor can be displayed.
• MAX/MIN/HOLD mode: displays maximum, minimum or average measured value.

Metrel MD 9272 Leakage Clamp Applications

The post Metrel MD 9272 Leakage Clamp TRMS Meter with Power Functions appeared first on rapid-tech.

Key features

• Predefined profile dependent
• AUTO SEQUENCEs.
• Predefined Automatic tests:
  Auto TT (U, Zln, Zs, Uc);
  Auto TN/RCD (U, Zln, Zs, Rpe);
  Auto TN (U, Zln, Zlpe, Rpe);
  Auto IT (U, Zln, Isc, Isfl, IMD).
• High resolution colour touch screen, 4.3” TFT
• Built-in help screens for referencing on site.
• Built-in fuse tables for automatic evaluation of the line / loop impedance result.
• Monitoring of all 3 voltages in real-time.
• Automatic polarity reversal on continuity test.
• Automated RCD testing procedure.
• Automated Impedance testing procedure (Z AUTO).

 

• Functional inspections.
• Measurement filtering according  to the selected area group.
• Built-in charger and rechargeable batteries as standard accessory.
• BT communication with PC, Android tablets and smart phones via built-in BT.
• PC SW Metrel ES Manager (structure and report creation, data upload/download).
• Optional aMESM Android APP (structure and report creation, data upload/download).

 

Measuring functions

• Insulation resistance with DC voltage from 50 V to 1000 V;
• Varistor test;
• Continuity of PE conductors with 200 mA DC test current with polarity change;
• Continuity of PE conductors with 7 mA test current without RCD tripping;
• Line/Loop impedance combined also in one function Z AUTO;
• Loop impedance with Trip Lock RCD function;
• TRMS voltage and frequency measurements;
• Phase sequence;
• Power and THD measurement (up to the 12th harmonic);
• RCD testing (general and selective, type AC, A, F, B, B+, MI RCD, EV RCD, PRCD, PRCD-K, PRCD-S);
• Earth resistance (3-wire and 2-clamps method);
• Specific earth resistance with Ro-adapter (option);
• TRMS leakage and load currents (option);
• First fault leakage current (ISFL);
• Testing of Insulation Monitoring Devices (IMDs);
• Illumination (option);
• High resolution Loop impendance (mΩ) (option);
• EVSE AUTO SEQUENCEs and function inspections;
• Determining location of cables (option);
• QR and/or barcode scanner support (option).

Metrel MI 3152 Standard Set

• Instrument MI 3152 EurotestXC
• Plug commander, 1.5 m
• Test lead, 3 x 1.5 m
• Power supply adapter + 6 NiMH rechargeable batteries, type AA
• Test probe, 3 pcs (blue, black, green)
• Crocodile clip, 3 pcs (blue, black, green)
• Earth set 20 m
• RS232 – PS/2 cable
• USB cable
• Soft carrying bag
• Soft carrying neck belt
• Metrel ES Manager BASIC license*
• Short instruction manual

.

*Metrel ES Manager can be downloaded free of charge from Metrel Web server.

The post Metrel MI 3152 EurotestXC Multifunction Tester appeared first on rapid-tech.