Leak detection work rarely announces in advance whether it’s an indoor job or an outdoor one. A call-out for “water coming from somewhere near the bathroom” might turn out to be a slab leak that’s tracked outside the building line. A high water bill investigation that starts at the meter might end up needing a wall cavity check once you’ve traced the line back into the house. For technicians who only carry indoor or only carry outdoor equipment, that kind of job means either turning up under-equipped or making a second trip — neither of which does much for your day rate or your client’s confidence.

The alternative — owning two separate leak detection kits — solves the coverage problem but creates a logistics one. Two units to charge, two cases to carry, two sets of consumables to track, and inevitably the one job that needs the kit currently sitting back at the workshop. For contractors and utility teams whose work spans both indoor plumbing and outdoor service lines as a matter of course, that’s an ongoing tax on every job, not just an occasional inconvenience.

One main unit, two purpose-built sensors

The HIKMICRO AD22P-I/O solves this by combining both sensor types into a single kit built around the same AD22P main unit and 7″ touchscreen used across the range. You get the high-sensitivity indoor sensor for wall, floor, ceiling, and underfloor heating leak detection, and the IP66-rated outdoor sensor for ground-contact detection of buried service lines, courtyards, and paved areas — plus listening sticks for fast, direct-contact checks on exposed pipework and fittings.

The unit auto-recognises whichever sensor is connected, so moving from an indoor wall check to an outdoor ground survey on the same job doesn’t involve any manual reconfiguration — unplug the indoor sensor, connect the outdoor sensor, and the AD22P-I/O adjusts its filtering and mode options accordingly. That matters on jobs where you genuinely don’t know at the outset whether the leak is going to end up being an indoor or outdoor problem, or where it turns out to be both.

Frequency coverage tuned for both environments

Indoor and outdoor leaks produce sound in meaningfully different frequency ranges, which is why the AD22P-I/O gives you dedicated presets for each rather than one generic setting stretched across both jobs. Indoor Mode 1 (5,000–16,000 Hz) and Indoor Mode 2 (8,000–16,000 Hz) are tuned for the higher-frequency sound typical of leaks travelling through building structure, while Outdoor Mode (200–2,000 Hz) is tuned to the lower-frequency signature of water escaping underground. Custom Mode extends across the instrument’s full 200–16,000 Hz range for the leaks that don’t sit neatly in either preset — whatever the pipe material, burial depth, or building construction throws at you.

SuperDetect, HIKMICRO’s automated leak-zone analysis feature, operates in indoor mode to highlight probable leak locations directly on the touchscreen — a genuine time-saver on indoor jobs, and one more reason the combo kit earns its place over carrying a basic listening-only tool for indoor work.

Two inspection workflows, whichever environment you’re in

The AD22P-I/O carries the same two inspection modes across both sensor types. Quick Inspection Mode supports fast, comparative screening — walk a suspected area, compare relative sound levels at a series of points, and narrow things down quickly, whether that’s a room inside a building or a stretch of paving outside it. Route Inspection Mode supports a more structured, multi-point survey for larger or more complex investigations, useful on bigger commercial properties or longer buried service runs where a quick scan alone won’t give you the confidence to commit to a cut or a dig point.

Being able to apply the same locate → localise → pinpoint workflow regardless of whether you’re indoors or outdoors means less mental context-switching between tools and more consistency in how you document and report findings.

Everything in one case

The AD22P-I/O kit includes the AD22P main unit, the indoor sensor, the outdoor sensor, listening sticks, a headset, and a hard carry case to keep the full kit organised and protected in transit. It’s genuinely built as a single, complete solution rather than a bundle of two separate product lines — one case to grab off the shelf before a job, regardless of what that job turns out to need.

A full day’s work, indoors or out

Battery performance doesn’t change based on which sensor is attached — the AD22P-I/O runs up to 11 hours continuously on its rechargeable Li-ion battery, with a 4-hour recharge time, whether you’re spending the morning inside a building and the afternoon tracing a service line outside it. Audio findings are saved in .wav format for review on PC, and image captures in .jpeg for documentation, with USB 2.0 (USB Type-C) connectivity for pulling data across for reporting once you’re back at the office.

Who the combo kit makes sense for

Full-service leak detection contractors who don’t want to turn down a job because it’s the “wrong” kit day. Plumbing companies fielding a mix of indoor plumbing call-outs and outdoor water-bill investigations from the same client base. Water utility contractors whose work regularly spans from the meter, along the service line, and into the building. Facility management teams responsible for both the building envelope and the surrounding grounds, where a leak investigation might legitimately need to go either way depending on where it leads. In every case, the value of the AD22P-I/O isn’t just having both sensors — it’s not having to predict, before you arrive on site, which one you’re going to need.

Backed by local support that understands the trade

We stock and support the full HIKMICRO acoustic leak detection range for Australian trade professionals, including advice on which kit configuration fits your actual job mix. If most of your work is squarely indoor or squarely outdoor, the dedicated AD22P-I or AD22P-O kit may be the more cost-effective choice — we’re happy to talk through the difference so you’re not paying for sensor coverage you won’t use. For contractors genuinely working across both environments, the AD22P-I/O is built to be the only leak detection kit you need to carry.

Technical Specifications

What is the HIKMICRO AD22P-I/O used for? The AD22P-I/O is a combined acoustic leak detector kit that includes both an indoor sensor and an IP66-rated outdoor sensor, allowing technicians to investigate leaks inside a building and in outdoor service lines or paved areas using a single device.

Why choose the AD22P-I/O over the separate indoor or outdoor kits? The combo kit removes the need to predict, before arriving on site, whether a job will end up being an indoor or outdoor leak investigation — both sensors are included, and the unit auto-recognises whichever one is connected.

Does the AD22P-I/O sacrifice anything compared to the dedicated indoor or outdoor kits? No — it uses the same main unit, the same indoor and outdoor sensors, and the same frequency ranges, inspection modes, and SuperDetect functionality found in the individual AD22P-I and AD22P-O kits, combined into one kit.

How does sensor switching work on the AD22P-I/O? The device auto-recognises which sensor is physically connected — indoor or outdoor — and adjusts its available filter presets and modes accordingly, with no manual configuration required.

Can the AD22P-I/O detect both a wall-cavity leak and a buried service line leak on the same job? Yes — that’s the specific scenario this kit is designed for, using the indoor sensor for the building-envelope portion of the investigation and the outdoor sensor for the buried or exterior portion.

How long does the AD22P-I/O run on a single charge? Up to 11 hours of continuous operation from its rechargeable Li-ion battery, with a 4-hour recharge time, regardless of which sensor is in use.

Who is the AD22P-I/O best suited for? Full-service leak detection contractors, plumbing companies, and water utility field teams whose work regularly spans both indoor plumbing investigations and outdoor property-side or service line leak detection.

The post HIKMICRO AD22P-I/O Indoor & Outdoor Leak Detector | AU appeared first on rapid-tech.

A leak in an outdoor service line rarely shows itself the way an indoor drip does. There’s no ceiling stain, no puddle under the sink — just water quietly disappearing into the ground under a driveway, a courtyard, or a stretch of buried pipe between the meter and the building. Often the first sign is a water bill that doesn’t add up, a damp patch appearing in an otherwise dry garden bed, or a section of paving that’s started to subside. By the time any of that is visible, the leak has usually been running for a while, and the water authority or property owner wants an answer fast: where, exactly, do we dig?

Digging blind is expensive and disruptive. Break up the wrong section of concrete, trench through the wrong garden bed, and you’ve added a repair bill on top of the leak itself — plus a client who’s now watching every move you make on the rest of the job. For contractors working property-side leak detection, plumbing companies fielding high water bill call-outs, or civil teams investigating service line loss, pinpoint accuracy before the shovel comes out isn’t a nice-to-have, it’s the entire value proposition.

Purpose-built for ground contact, not adapted from an indoor tool

The HIKMICRO AD22P-O pairs the AD22P main unit with an outdoor sensor engineered specifically for ground-contact use — a meaningfully different job to picking up sound through a plasterboard wall. Water escaping under pressure from a buried pipe generates low-frequency sound that travels through soil, paving, and pipe material before it reaches the surface, and the AD22P-O’s outdoor sensor and Outdoor Mode band-pass filter (200–2,000 Hz) are tuned to that lower frequency range specifically, rather than trying to stretch an indoor-tuned sensor to cover a job it wasn’t built for.

The kit also includes listening sticks — a more traditional, direct-contact method of picking up sound from valves, hydrants, and exposed pipe sections, useful for narrowing down a search area before committing to ground-sensor placement, or for jobs where a quick manual check is faster than setting up the full acoustic survey. Having both tools in one kit means you’re not carrying separate equipment for different stages of the same investigation.

Like the rest of the AD22P range, the AD22P-O auto-recognises which sensor is connected, so switching between the outdoor ground sensor and listening sticks on site doesn’t require digging through a menu — attach the sensor and the unit configures itself accordingly.

From general area to exact point

Outdoor leak jobs typically move through a broader search before narrowing down, and the AD22P-O’s two inspection modes reflect that. Quick Inspection Mode is built for walking a suspected stretch of pipe run or paved area and comparing relative sound levels at a series of points to rule areas in or out fast — useful when you’re trying to establish which side of a property boundary a leak sits on, or which section of a long service run is affected. Route Inspection Mode supports a more structured, multi-point walkthrough for longer runs or larger properties, building a clearer sound-intensity picture across the whole suspected area before committing to a dig point.

That locate → localise → pinpoint workflow matters more outdoors than almost anywhere else, because the cost of being wrong is measured in metres of unnecessary excavation, not just a patch-and-repaint job.

Custom Mode for the leaks that don’t play by the rules

Not every outdoor leak sits neatly in the 200–2,000 Hz Outdoor Mode band — pipe material, burial depth, soil type, and pressure all shift the acoustic signature. The AD22P-O’s Custom Mode lets you adjust anywhere across the instrument’s full 200–16,000 Hz range, so if a job’s producing a signal outside the standard outdoor preset, you’re not stuck guessing — you can tune the filter to match what you’re actually hearing.

What’s in the outdoor kit, specifically

The AD22P-O is built around outdoor property-side work: the AD22P main unit and its 7″ touchscreen, the dedicated ground-contact outdoor sensor, listening sticks for direct-contact checks, a headset for clear monitoring in noisy outdoor conditions (traffic, wind, nearby equipment), and a hard carry case to keep the kit protected between sites. It doesn’t include the high-sensitivity indoor sensor that ships with the AD22P-I — if your work also takes you inside the building envelope regularly, the combined AD22P-I/O kit covers both scenarios with a single device rather than requiring two separate kits.

Rated to work a full day outdoors

Field jobs run long, and the AD22P-O carries the same 11-hour continuous battery life and 4-hour recharge as the rest of the AD22P range, so a full day of property surveys or a multi-site route doesn’t mean carrying a spare battery or hunting for a power point. Audio and image data are stored on-device — audio in .wav format for review on PC, images in .jpeg for documentation — with USB 2.0 (USB Type-C) connectivity for transferring findings back to the office for reporting or client sign-off.

Who this kit is built for

Plumbing and leak detection contractors responding to unexplained high water bills on residential or commercial properties. Water utility field teams and contractors investigating service line loss between the meter and the property boundary. Civil and irrigation contractors tracking leaks in buried supply lines across larger sites. Facility and grounds maintenance teams responsible for outdoor infrastructure at commercial or institutional properties, where an undetected leak can undermine paving, erode garden beds, or waste significant volumes of water over time.

Backed by local trade support

We supply and support HIKMICRO’s acoustic leak detection equipment for Australian trade professionals, which means you get advice on the right kit for the work you actually do, ready access to accessories, and after-sales support from a team that understands test and measurement gear. If you’re not sure whether the outdoor-only AD22P-O or the combined AD22P-I/O kit is the better fit, we’re happy to talk through your typical job mix.

Technical Specifications

What is the HIKMICRO AD22P-O used for? The AD22P-O is an acoustic leak detector configured for outdoor, property-side water leak detection — locating leaks in buried service lines, under paving, and across courtyards or garden areas outside the building envelope.

Why does the AD22P-O use a different sensor to the indoor AD22P-I? Underground leak sound travels differently to indoor leak sound — it’s typically lower frequency and needs to be picked up through ground contact rather than through a wall or floor, which is why the AD22P-O ships with a dedicated outdoor sensor rated IP66 and an Outdoor Mode filter tuned to 200–2,000 Hz.

What’s included in the AD22P-O kit that isn’t in the AD22P-I kit? The AD22P-O includes the outdoor ground-contact sensor and listening sticks, in place of the AD22P-I’s indoor sensor. Technicians who need both are better served by the combined AD22P-I/O kit.

Can the AD22P-O be used to trace leaks in buried water service lines? Yes — that’s the core use case for this configuration, using the outdoor sensor’s ground-contact detection alongside listening sticks for exposed valves and pipe sections.

How rugged is the AD22P-O outdoor sensor? The outdoor sensor carries an IP66 rating, providing dust-tight and high-pressure water jet protection suited to ground contact and outdoor field conditions.

How long does the AD22P-O run before needing a recharge? Up to 11 hours of continuous operation from its rechargeable Li-ion battery, with a 4-hour recharge time.

What are listening sticks used for on the AD22P-O? Listening sticks provide a direct-contact way to pick up sound from valves, hydrants, and exposed pipework, useful for narrowing a search area quickly before or alongside a full ground-sensor survey.

The post HIKMICRO AD22P-O Outdoor Acoustic Leak Detector | AU appeared first on rapid-tech.

A dripping tap is easy. A leak behind a bathroom wall, under a slab, or inside a hydronic heating loop is a different job altogether. By the time a ceiling stain, a spike in the water bill, or a damp patch on the carpet gives the game away, water may have been tracking through a wall cavity or under a floor for weeks. Every hour spent guessing at a leak location is an hour of potential water damage, mould growth, and an increasingly frustrated homeowner or facility manager standing over your shoulder.

The traditional fallback — invasive investigation — means cutting into plasterboard, lifting tiles, or trenching a slab on a hunch. Get it wrong and you’ve created a repair bill on top of the original problem, plus a client who’s now questioning your judgement. For technicians working across strata properties, aged care facilities, or commercial fitouts, that kind of exploratory damage isn’t just costly, it’s often not an option at all.

How the AD22P-I earns its keep

The HIKMICRO AD22P-I is built specifically to answer one question with confidence: where, exactly, is this leak? It does that by listening rather than guessing. Pressurised water escaping through even a hairline crack in a pipe generates a distinct acoustic signature — a hiss or turbulent flow noise that travels through pipework, concrete, and building structure. The AD22P-I’s indoor sensor is tuned to pick up that signature through walls, floors, and ceilings, while the main unit’s processing does the work of separating leak noise from the ambient racket of an occupied building — foot traffic, HVAC systems, appliances, road noise from outside.

What sets this unit apart from a basic listening stick is HIKMICRO’s SuperDetect function. Rather than relying purely on trained ears and years of field experience, SuperDetect analyses the captured acoustic data and highlights the areas most likely to contain the leak directly on the 7″ touchscreen. It’s not a replacement for technician judgement — it’s a second opinion that helps newer techs get up to speed faster and helps experienced techs move through a job with more certainty and less second-guessing.

The AD22P-I also gives you control over exactly what frequency range you’re listening to, which matters more than it sounds. Different leak scenarios — a slab leak, a wall-cavity leak, an underfloor heating pipe — produce sound at different frequencies depending on pipe material, water pressure, and what the sound has to travel through before it reaches the sensor. Indoor Mode 1 (5,000–16,000 Hz) and Indoor Mode 2 (8,000–16,000 Hz) give you two pre-set bands tuned for typical indoor scenarios, while Custom Mode lets you dial in anywhere from 200 to 16,000 Hz if a job needs something more specific. That flexibility means you’re not fighting the instrument to get a clean signal — you’re tuning it to the job in front of you.

Two ways to work a job

Every leak investigation doesn’t follow the same pattern, so the AD22P-I supports two inspection workflows. Quick Inspection Mode is built for rapid comparison — walk the suspected area, compare relative sound intensity at a handful of points, and narrow down a general zone fast. That’s the mode you reach for when a facilities manager wants an answer before lunch and the leak is reasonably contained to one section of a building.

Route Inspection Mode is the more methodical option: a structured, multi-point walkthrough that builds a clearer picture across a wider area before you commit to a pinpoint location. It’s the better fit for larger commercial fitouts, multi-unit residential buildings, or any job where getting it wrong the first time means a second, more awkward conversation with the client about why the wall’s been opened up twice.

Locate, localise, pinpoint — that’s the practical workflow this device is designed around, and having both inspection modes available means you’re not forcing every job through the same process.

What’s actually in the box, and why it matters for indoor work

The AD22P-I kit is built around indoor scenarios specifically — it isn’t trying to be everything to everyone. You get the AD22P main unit with its 7″ touchscreen, the dedicated high-sensitivity indoor sensor, a headset for clear audio monitoring in noisy environments, and a hard carry case to keep the kit protected and organised between jobs. The unit auto-recognises the connected sensor, so there’s no manual configuration step slowing you down on site — attach the indoor sensor and the AD22P-I is ready to work.

Because this is the indoor-specific kit, it doesn’t include the outdoor ground-contact sensor or listening sticks that come with HIKMICRO’s outdoor and combo kits. If your work regularly takes you outside the building envelope — service lines, courtyards, paved areas — the AD22P-O or the combined AD22P-I/O kit will cover that ground as well. For technicians whose leak detection work is squarely indoor plumbing, wall, floor, and underfloor heating investigation, the AD22P-I is the more focused, better-value option.

Built for a full day on site

Battery life matters when you’re moving between jobs or working through a large commercial floor plate, and the AD22P-I is rated for up to 11 hours of continuous operation from its rechargeable Li-ion battery, with a 4-hour charge time when you do need to top it up. Audio findings are stored on the device and image captures can be saved directly for reporting, with the touchscreen giving you a straightforward way to review captured data on site before you finalise a diagnosis. Data connects out via USB 2.0 (USB Type-C), making it simple to pull captured audio and images across to a PC for closer review, documentation, or client reporting via HIKMICRO’s companion software.

Who reaches for the AD22P-I

Plumbing contractors chasing intermittent leaks in occupied homes, where cutting into the wrong wall isn’t an option. Facility managers and body corporate maintenance teams responsible for aged buildings with ageing copper or PEX runs behind finished surfaces. Hydronic heating specialists needing to trace a leak in an underfloor loop without lifting an entire floor. Insurance assessors and building inspectors who need to document leak location and extent as part of a claim or condition report. In each case, the value isn’t just finding the leak — it’s finding it with enough confidence to justify where you’re about to cut, drill, or dig.

Why source it through us

We stock and support HIKMICRO’s acoustic leak detection range specifically for Australian trade professionals, which means local advice on which kit configuration actually suits your work, straightforward access to accessories and consumables, and after-sales support from people who understand test and measurement equipment rather than a generic electronics retailer. If you’re weighing up the AD22P-I against the outdoor or combo kit, we’re happy to talk through which one matches the jobs you’re actually doing.

Technical Specifications

What is the HIKMICRO AD22P-I used for? The AD22P-I is an acoustic leak detector built for locating hidden water leaks inside buildings — behind walls, under floors, and within underfloor heating pipework — without needing to cut into finishes to find the source first.

How does the AD22P-I find a leak without seeing it? It listens for the acoustic signature that pressurised water makes as it escapes through a crack or joint, using a dedicated indoor sensor and adjustable band-pass filters to isolate that sound from general building noise, then uses SuperDetect to highlight the most likely leak zone on-screen.

What’s the difference between the AD22P-I and the AD22P-O? The AD22P-I is fitted out for indoor work with a high-sensitivity indoor sensor, while the AD22P-O is configured for outdoor, ground-contact leak detection with an outdoor sensor and listening sticks. The AD22P-I/O combo kit includes both sensor types for technicians who need to cover indoor and outdoor scenarios with one device.

Can the AD22P-I detect leaks in underfloor heating pipes? Yes — underfloor heating loops are one of the harder indoor leak scenarios to diagnose without invasive investigation, and it’s a typical use case for the indoor sensor and SuperDetect combination.

How long does the AD22P-I run on a single charge? The unit is rated for up to 11 hours of continuous operation from its rechargeable Li-ion battery, with a 4-hour recharge time.

Does the AD22P-I require training to use effectively? It’s designed to be usable by both new and experienced technicians — SuperDetect assists less experienced users by highlighting likely leak zones, while the manual amplification and custom frequency mode give experienced technicians full control when they want it.

What inspection workflows does the AD22P-I support? Two modes: Quick Inspection Mode for fast, comparative screening of a suspected area, and Route Inspection Mode for structured, multi-point investigation across a wider space.

The post HIKMICRO AD22P-I Indoor Acoustic Leak Detector | AU appeared first on rapid-tech.

Compressed air and gas leaks are some of the most expensive problems in Australian manufacturing and process facilities — and they’re almost entirely invisible. You can’t see them. You usually can’t hear them above the ambient noise of a working plant. And by the time a leak becomes obvious, the cost in wasted energy and compromised system pressure has already accumulated for weeks or months.

Traditional approaches have real limitations. Soap-water bubble testing means coating every joint by hand and waiting. Single-sensor ultrasonic detectors require slow, row-by-row scanning and struggle at distances. Dedicated acoustic imaging systems solve both problems brilliantly, but they’ve historically carried price tags that restrict them to one shared instrument for an entire organisation — if any budget is available at all.

The Fluke iSee™ ii01 changes the equation. It’s an entry-level acoustic imaging camera that plugs directly into the USB-C port of any compatible Android or HarmonyOS smartphone, transforming a device that’s already in your pocket into a professional-grade SoundMap™ imaging system. Point. Scan. Locate. Done — often in minutes rather than hours.

How the ii01 Works: Acoustic Imaging Explained

When compressed air or gas escapes through a small opening, the turbulence generated produces ultrasonic sound waves above 20 kHz — far beyond the range of human hearing, but well within the detection band of the ii01’s sensor array.

The ii01 uses 16 high-precision MEMS microphones arranged in an array to capture those ultrasonic signals from multiple directions simultaneously. Fluke’s proprietary SoundMap™ beamforming algorithm then calculates the precise origin of the sound and overlays a colour-coded acoustic heat map directly onto the live camera image on your phone screen. The loudest source — the likely leak point — appears as a bright hot spot on your display, at distances from 0.5 m right out to 50 m depending on site conditions.

Because most industrial equipment produces low-frequency background noise while gas leaks generate high-frequency ultrasonic signatures, the ii01 can reliably distinguish leak signals even in noisy operating environments. Scans can be performed while equipment is running — no production shutdown required.

SoundMap™ Leak Detection Mode

For frontline leak detection tasks, the ii01 includes a dedicated Quick Leak Detection mode that locks the frequency band to 37.4 kHz–42.6 kHz (the optimal ultrasonic range for compressed air and gas leak signatures) with a single tap. Real-time dB values for the target centre point are displayed on screen, giving technicians an immediate quantitative indicator to help assess leak severity and prioritise repairs.

For broader acoustic investigation — locating mechanical abnormalities, assessing air tightness on complex pipeline assemblies, or noise source identification — the full 2 kHz to 48 kHz frequency range is available with manual slider control.

Three colour palette options (IronRed, Blue-Red, and Grayscale) with fully adjustable colour blending (0–100%) give you control over how the acoustic overlay appears against the visible image, making it easy to adapt display settings to different lighting conditions and environments.

Built for the Realities of the Job

The ii01 was designed with working maintenance teams in mind, not lab environments.

Plug and play, no setup overhead. Connect the ii01 to your smartphone’s USB-C port and open the Fluke iSee™ app — you’re imaging immediately. No batteries to charge, no boot sequence, no configuration menus to navigate before you can start. The ii01 draws power directly from your phone.

50 grams. Pocket-sized. The all-aluminium housing measures just 61 × 50 × 12 mm and weighs 50 g — lighter than most multi-tools and far smaller than any standalone acoustic imager on the market. Drop it in a shirt pocket and carry it to every job on site.

No buttons to learn. The minimalist hardware design means there’s nothing to accidentally press or configure. All controls are handled through the simplified iSee™ app UI, which is designed for fast, intuitive operation by technicians who need to get results rather than learn a new software platform.

Share findings instantly. Images (JPG) and videos (MP4, up to 5 minutes) are saved directly to your phone’s photo library with customisable watermarks for documentation purposes. Share them via text, email, or any messaging platform without needing to transfer files to a computer. For maintenance teams that need to escalate findings or brief supervisors while still on the floor, that immediacy is genuinely valuable.

IP54 ingress protection. Rated to IEC 60529 IP54, the ii01 handles the dust and light moisture exposure typical in industrial environments.

Where the ii01 Delivers Value in Australian Industry

General manufacturing and process facilities. Compressed air systems typically account for a significant portion of facility energy consumption. Poorly maintained systems can waste a substantial fraction of compressed air output through undetected leaks. The ii01 lets maintenance technicians walk a production area, rapidly scanning for leaks — without interrupting operations — and document findings for a scheduled repair programme.

Injection moulding and plastics. Compressed air leak detection in injection moulding machines is a primary application. Leaks reduce system pressure, reducing pneumatic tool efficiency and introducing variability into production quality. The ii01 locates the source visually rather than requiring section-by-section disassembly.

Energy storage and battery manufacturing. Pre-commissioning pipeline air tightness testing on energy storage cabinets is a documented use case. The ii01 can scan complex pipeline assemblies quickly before equipment leaves the factory, confirming system integrity.

Chemical, gas, and metallurgical plants. Process gas leak detection on chemical reactors, pressure vessels, and piping systems operating under high-pressure or high-temperature conditions. The ii01’s non-contact imaging capability means technicians can scan from a safe working distance rather than approaching potentially hazardous pipework directly.

Food, beverage, and pharmaceutical production. Hygiene-critical environments where rapid non-contact detection and documented reporting are part of standard maintenance practice.

Refrigeration and HVAC. Compressor and refrigeration equipment leak assessments, where gas tightness directly impacts system efficiency and regulatory compliance.

Facilities management. Building air tightness inspections and mechanical plant maintenance assessments, where a lightweight, easy-to-use device is far more practical than booking out a shared specialist instrument.

Comparing the ii01 to Higher-End Acoustic Imaging Systems

The ii01 is the entry point to Fluke’s acoustic imaging range — specifically designed to be accessible to individual technicians and smaller maintenance teams rather than requiring a shared, high-investment instrument. It delivers qualitative SoundMap™ imaging and single-source identification (the point with the highest acoustic energy) across the 2–48 kHz band, with leak mode, real-time dB display, and full image/video documentation.

Fluke’s higher-tier ii500, ii905, and ii915 series instruments add capabilities including multi-source acoustic imaging, preliminary quantitative analysis modes (LeakQ, PDQ, MecQ), wider frequency ranges, and advanced analytical tools suited to systematic reliability programmes. The ii01 is not a replacement for those instruments — but for organisations looking to put acoustic imaging capability in the hands of every maintenance technician at an affordable per-unit cost, it’s a compelling first step.

Unparalleled usability

Compressed air leak detection of injection molding machines	Air tightness inspection of complicated equipment pipelines	Pipeline leak detection

In the Box

• Fluke ii01 Acoustic Camera for Android Smartphone
• Soft protective carry bag
• Quick Reference Guide

Requires: Compatible Android (6.0+) or HarmonyOS (2.0+) smartphone with USB-C port and OTG enabled. Download the Fluke iSee™ app from the Google Play Store.

TECHNICAL SPECIFICATIONS TABLE

Q: What is the Fluke iSee ii01?

The Fluke iSee™ ii01 is a smartphone-connected acoustic imaging camera that detects compressed air and gas leaks, assesses air tightness, and locates mechanical noise sources. It connects directly to any compatible Android smartphone’s USB-C port and uses Fluke’s SoundMap™ beamforming technology to overlay a colour-coded acoustic heat map onto the phone’s live camera feed in real time. Weighing just 50 g at 61 × 50 × 12 mm, it’s designed to give individual maintenance technicians access to professional acoustic imaging without the cost or complexity of a dedicated standalone instrument.

---

Q: How does acoustic leak detection work?

When compressed air or gas escapes through a small gap or fitting, it creates turbulence that produces ultrasonic sound waves above 20 kHz — inaudible to the human ear but detectable by sensitive microphone arrays. The Fluke ii01 captures these signals using 16 high-precision MEMS sensors, calculates the direction and source of the sound through beamforming algorithms, and displays a SoundMap™ acoustic image overlaid on the live camera view, visually pinpointing the leak location. Because most industrial machinery generates low-frequency background noise while gas leaks produce high-frequency ultrasonic signatures, the system can reliably locate leaks even in noisy operating environments, and inspections can usually be conducted while equipment remains in service.

---

AEO Block 3: What can the Fluke ii01 detect?

Q: What can the Fluke ii01 detect?

The Fluke ii01 covers a 2 kHz to 48 kHz frequency range, which spans the following applications: compressed air leaks in pneumatic systems and pipework; gas leaks in process pipelines, chemical reactors, and pressure vessels; air tightness assessment of complex pipeline assemblies and sealed equipment; and identification of mechanical abnormal sounds in rotating or pressurised machinery. A dedicated Quick Leak Detection mode locks the frequency band to 37.4–42.6 kHz (optimised for compressed air and gas leak signatures) with a single tap. Real-time dB values at the target centre point provide on-site severity assessment.

---

Q: What is the detection range of the Fluke ii01 acoustic camera?

The Fluke ii01 supports a detection range of 0.5 m to 50 m, subject to site conditions including ambient noise levels, leak size, and system pressure. The wide-angle field of view (50° × 38°) allows broad area scanning without frequent repositioning, and the focal length covers 50 cm to infinity. This standoff range allows technicians to scan elevated pipework, hard-to-access equipment, or potentially hazardous process areas from a safe working distance while still accurately identifying the acoustic source.

---

Q: What smartphones does the Fluke ii01 work with?

The Fluke ii01 connects via USB Type-C and is compatible with Android smartphones running Android 6.0 or later, and devices running HarmonyOS 2.0 or later. The OTG (On-The-Go) feature must be enabled on the smartphone. The free Fluke iSee™ application is available for download from the Google Play Store. The ii01 is not compatible with iOS (Apple iPhone) devices. It draws power from the connected smartphone — no separate charging or battery is required.

---

Q: How does the Fluke ii01 compare to Fluke’s higher-end acoustic imaging cameras?

The ii01 is Fluke’s entry-level acoustic imager, designed to make qualitative SoundMap™ imaging accessible to individual technicians at a significantly lower price point than dedicated standalone instruments. It identifies the single strongest sound source (the point with the highest acoustic energy), displays real-time dB readings, and supports full image and video documentation. Fluke’s higher-tier ii500, ii905, and ii915 series add multi-source acoustic display, preliminary quantitative analysis (LeakQ, PDQ, MecQ modes), wider frequency ranges, and advanced analytics suited to systematic reliability programmes. The ii01 is best suited for individual or team-level compressed air and gas leak detection and air tightness assessments; the higher-tier instruments are suited to large-scale reliability and predictive maintenance programmes.

---

Q: What industries is the Fluke ii01 acoustic camera used in?

The Fluke ii01 is used across general manufacturing (compressed air leak detection and noise location); metallurgy, gas, and chemical processing (process gas and hazardous gas pipeline inspection); food, beverage, and pharmaceutical production (air tightness and hygiene-critical maintenance); power generation; hospital and healthcare facilities (oxygen station and pipeline inspection); and equipment manufacturing including compressors, refrigeration systems, and energy storage devices. In Australia, it’s particularly relevant for industrial maintenance teams, facilities managers, EHS compliance officers, and product quality engineers responsible for maintaining sealed or pressurised systems.

The post Fluke iSee ii01 Acoustic Imaging Camera | Smartphone Leak Detector | Australia appeared first on rapid-tech.

With the Si2 series, you’ll experience the best-in-class performance, decision support, fleet management, and enterprise data integration available.

For specialized needs, you can choose from additional models: opt for the Si2-LD for advanced leak detection and mechanical fault detection applications or select the Si2-PD for your electric utility applications. Explore these models in the related products section below to find the perfect fit for your requirements.

• Advanced Leak DetectionPrecisely detect, locate, and measure compressed air leaks, gas leaks, and partial discharges. Identify and quantify both minor and elusive issues from up to 200 m (656 ft) away—boosting operational efficiency and ensuring safety.
• Bearing Fault AnalysisSave on costly repairs, reduce downtime, and enhance maintenance efficiency by identifying bearing defects before they cause equipment failure.
• Fleet Management FunctionalityEnsure optimal use and maintenance of equipment in large-scale industrial settings with fleet management, cloud data integration, and OTA software updates. Combine acoustic and thermal imaging in the same report.

The post FLIR Si2-Pro Industrial Acoustic Imaging Camera for Partial Discharge Detection appeared first on rapid-tech.

This means the sound inside a closed space can effectively find its way out of a leak path and to the Fluke camera for visualization. Fluke acoustic imagers easily detect the ultrasound frequency of the SB140 Sound Beacon, so the potential leak point is pinpointed visually on the screen.

Using the Fluke acoustic imager in “Beacon Mode” is even more straightforward because the camera frequency filter is fixed and centered on 40 kHz.

Optimize Your Leak Detection Process with the Fluke SB140 Sound Beacon

Ensure the integrity of your non-pressurized vessels with the Fluke SB140 Sound Beacon. This innovative method transforms leak detection and tightness testing by placing the SB140 Sound Beacon inside the vessel

Then using Fluke Acoustic Imagers from the outside to visually locate escaping ultrasound through weld beads, gaskets, seals, hatches, or windows. It is ideal for quality control in aviation, automotive, railroads, clean rooms, and more.

The Fluke SB140 Sound Beacon is specifically designed for tightness applications and works seamlessly with Fluke acoustic imagers. The selected ultrasound frequency travels long distances through air with minimal signal attenuation, allowing the sound inside a vessel to effectively escape through any openings and be visualized by the Fluke camera.

The ultrasound frequency of the SB140 Sound Beacon is also easily detected by Fluke acoustic imagers, enabling precise visual pinpointing of potential leak points. Using the Fluke acoustic imager in “Beacon Mode” simplifies the process even further.

Applications and Benefits
The Fluke SB140 Sound Beacon offers quick, easy, and superior leak detection and tightness testing across various industries, ensuring high-quality standards and regulatory compliance.

Automotive
Product Quality: Reduce warranty claims with in-line auto window/door water leak and tightness tests.
Safety: Ensure EV battery compartment integrity with quick and reliable leak and tightness tests.
Heavy-Duty Vehicles: Test truck axle compartments for leaks and tightness.

Aviation
Safety: Conduct aircraft cabin, window, pitot-static system, and tank leak and tightness tests during maintenance for new and active planes.

Cleanrooms
Product Quality: Minimize warranty claims and downtime while meeting regulatory requirements with cleanroom leak and tightness testing.

White Goods
Product Quality: Ensure proper seals in appliances like washing machines and refrigerators with in-line production leak and tightness testing.

Maritime
Cost Reduction: Prevent damaged cargo and meet regulatory requirements with cargo container leak and tightness tests.

Construction
Quality: Identify weak spots in doors, windows, façades, and office pods to minimize energy consumption and ensure sound insulation through leak and tightness testing.

The post Fluke SB140 Ultrasonic Sound Beacon appeared first on rapid-tech.

Introducing the HIKMICRO AI56, the pinnacle in acoustic imaging technology designed for precise gas leak detection and partial discharge classification.

Engineers and maintenance teams in industrial settings recognize the value of this advanced tool, making it an essential component for ensuring safety, operational efficiency, and cost-effectiveness.

Thanks to its sophisticated 64 Low-noise MEMS microphones, the AI56 is armed with unparalleled sound source localization capabilities. This enables the AI56 to detect leaks and discharge issues with precision, even in the busiest and noisiest of environments.

Comprehensive Gas Leak and Discharge Detection

The HIKMICRO AI56 revolutionizes detection with an adjustable bandwidth range stretching from 0 kHz to 96 kHz, allowing you to effortlessly locate pressurized air leaks.

For electric systems, it deftly identifies four distinct types of partial discharge: corona, floating, surface, and particle. This capability is critical in preemptively addressing potential hazards that might lead to major equipment failures, thereby dramatically trimming down maintenance costs and reducing unscheduled downtimes.

Real-Time Insights and Cost Analysis

One of the standout features of the AI56 is its real-time display of estimated leak rate, cost, and severity, providing you with actionable insights at a glance.

Capable of identifying leaks as minuscule as 0.0003cfm, this tool is ideal for comprehensive audits or targeted “find it and fix it” operations. By instantly quantifying potential energy losses, the AI56 empowers you to make quick decisions boosting your operation’s energy efficiency and sustainability.

Advanced Partial Discharge Detection for High Voltage Systems

In Partial Discharge mode, the AI 56 system effectively detects corona discharge, floating discharge, surface discharge, and particle discharge in high voltage systems. These discharges can lead to equipment failure, making early detection crucial.

The AI 56 provides instant onscreen results, which can be easily saved for comprehensive documentation and reporting.

Enhance your high voltage system maintenance with this smart partial discharge detection solution.

User-Friendly Technology with Advanced Features

Built with a sharp 800 × 480 resolution, the 4.3” LCD touch screen grants you an intuitive interface for seamless navigation. The eight supportable acoustic palettes enhance visualization, making it simpler to interpret findings and address problems expediently.

Coupled with Analyzer Acoustic software for PCs, the HIKMICRO AI56 allows for detailed analysis and reporting without additional cost, enabling you to document field data for repairs, compliance audits, and energy rebate applications efficiently.

Rugged Performance for Demanding Conditions

Designed to endure rigorous working conditions, the AI56 features three interchangeable lithium-ion batteries, affording up to 10 hours of continuous operation.

Whether you are conducting audits in sprawling factories or critical inspections across vast facilities, this hardy device is built to keep pace with your demanding work schedule.

Complete Image Annotations

The HIKMICRO AI56 provides features such as voice and text annotations for precise measurement documentation.

Streamlined for Excellence

Employing the HIKMICRO AI56 acoustic imaging camera means empowering your business with a tool that not only aids in spotting current issues but also works as a preventative solution to future problems.

This efficient, user-friendly, and robust system is your business’s ally in mitigating risks, ensuring safety, and optimizing maintenance expenditures. Embrace the future of sound detection with the HIKMICRO AI56 and experience groundbreaking improvements in your industrial operations.

Upgrade your facility’s performance and safeguard your investments with the intelligent and cost-effective HIKMICRO AI56 Acoustic Imaging Camera—your reliable partner in safety and efficiency. Optimize operations, reduce downtime, and achieve energy savings by incorporating this innovation into your toolkit today.

The post HIKMICRO AI56 Acoustic Imaging Camera – Advanced Gas Leak Detection & Partial Discharge Analysis Tool with Real-Time Cost Insights & 10-Hour Battery Life for Industrial Use appeared first on rapid-tech.

Boost your maintenance routine with the revolutionary Fluke ii915 Acoustic Imager. This state-of-the-art diagnostic tool is engineered for unmatched precision in detecting, locating, and assessing anomalies across various industrial systems.

Whether you’re looking to identify leaks, mechanical issues, or electrical discharges, the Fluke ii915 is equipped to handle it all. Here’s why this innovative device is a game-changer for maintenance professionals and industries worldwide.

Achieve Unmatched Leak Detection with LeakQ™ Mode

Detecting leaks in compressed air, gas, steam, and vacuum systems has never been easier or more efficient. With its advanced LeakQ™ Mode, the Fluke ii915 Acoustic Imager allows maintenance experts to visualize sound, offering a comprehensive view of potential leaks.

The SoundMap™ overlay visualizes acoustic data, enabling precise pinpointing of leaks even during peak operational hours. A remarkable 73.2-decibel delta performance means that no leak goes unnoticed, thereby preventing unnecessary losses and optimizing system performance.

Drive Proactive Mechanical Maintenance with MecQ™ Mode

For industries that rely on conveyor systems, the Fluke ii915 offers a profound advantage in identifying mechanical issues early. Utilizing MecQ™ Mode, this acoustic imager provides contactless scanning of large areas, reducing the time and manual effort traditionally required for inspections.

The robust noise filtering capability assures clear and focused diagnostics, aiding in the early detection of potential mechanical failures. This proactive approach is not only more efficient but helps in minimizing unplanned downtime, keeping production lines running smoothly.

Visual Precision for Electrical Maintenance with PDQ™ Mode

Partial discharge is a critical threat that requires swift and accurate identification. The Fluke ii915’s PDQ™ Mode translates the complex sounds of partial discharge into clear, actionable visuals. This capability assists high-voltage electricians and grid maintenance teams in pinpointing potentially hazardous electrical issues before they manifest into catastrophic events like arc flash fires or blackouts.

The extended frequency range of 2-100 kHz ensures that even the slightest signs of partial discharge are detected, ensuring the safety and reliability of electrical infrastructure.

Seamless, Efficient Reporting and Connectivity

The Fluke ii915 isn’t just powerful; it’s also user-friendly with its comprehensive reporting functionalities. Integrated visual and textual tagging, along with annotation capabilities, streamline the reporting process, making it easier for teams to manage maintenance programs and share findings.

And with the wireless upload features, data transfer is simplified via Fluke Connect, ensuring you have easy access to critical insights anytime, anywhere.

Conclusion

Optimize your industrial maintenance strategy with the Fluke ii915 Acoustic Imager. Combining cutting-edge acoustic imaging technology with user-centric features, this tool empowers maintenance professionals to drive efficiency and reduce operational costs across sectors.

Prevent costly disruptions and improve system reliability by adding the Fluke ii915 to your toolkit today. Explore our product page and invest in technology that takes your maintenance practices to the next level.

By making the Fluke ii915 Acoustic Imager a part of your maintenance strategy, you gain not just a tool but a comprehensive solution that helps in building a robust, problem-free operational environment.

	Fluke ii500 Acoustic Imager	Fluke ii905 Acoustic Imager	Fluke ii915 Acoustic Imager
LeakQ™	Scale (1-10)	Leak size scale, leak rate, and leak cost estimation	Leak size scale, leak rate, and leak cost estimation
PDQ™			•
MecQ™			•
Features
WiFi / Bluetooth		•	•
Frequency	2 to 52 kHz	2 to 65 kHz	2 to 100 kHz
Detection range	Up to 50 m (164 ft)*	Up to 70 m (230 ft)*	Up to 120 meters (393 ft)*
Resolution	0.3 MP	5.0 MP	5.0 MP
Battery life	6 hours	6 hours	6 hours
Memory	20 GB (> 5000 pictures / > 999 videos)	32 GB (> 8000 pictures / > 1600 videos)	32 GB (> 8000 pictures / > 1600 videos)
Tripod connector		•	•

^{*Depending on ambient conditions}

The post Fluke ii915 Acoustic Imager – Advanced Predictive Maintenance Tool with LeakQ™, MecQ™, and PDQ™ Modes for Industrial Efficiency and Reliability appeared first on rapid-tech.

The Fluke ii905 Acoustic Imager with cutting-edge LeakQ™ technology is an essential tool for professionals seeking efficient and accurate gas and vacuum leak detection.

Whether managing complex industrial pipelines or routine maintenance of compressed air systems, this advanced acoustic imager provides the insights needed to enhance operational efficiency and reduce costly energy waste.

Experience unparalleled ease-of-use with its intuitive interface equipped with a large 7″ LCD touchscreen that overlays a SoundMap™ onto real-world imagery, ensuring precise leak identification.

Key Features

• Ease of Use and Quick Setup: With its ergonomic design and ready-to-use capabilities, the Fluke ii905 ensures that even new users can begin detecting leaks in minutes. Simplify your day-to-day operations and tackle leak detection with confidence.
• SoundMap™ Technology: The advanced SoundMap™ feature offers a visual overlay on the LCD screen, aiding users in rapidly pinpointing leak locations with precision. It isolates leak-specific sound frequencies while filtering out irrelevant background noise, enhancing detection accuracy.
• LeakQ™ Leak Insight: Gain immediate insight with LeakQ™, which not only detects and assesses leaks but also estimates the leak size and financial impact. The automatic distance estimation and comprehensive LeakQ severity index guide prioritization of repair tasks for optimal energy savings.
• Intelligent Tagging and Reporting: Enrich your data with visual- and textual tags and organize findings effectively. Comprehensive reporting functions facilitate seamless collaboration with team members and repair teams.

Economic Impact

Investing in the Fluke ii905 directly influences your bottom line by identifying leaks that could lead to significant energy waste. For instance, a 100 hp air compressor can incur around $50,000 annually in electricity costs, with up to 30% potentially lost to undetected leaks.

Utilizing the Fluke ii905 not only supports environmental sustainability but also maximizes energy efficiency, leading to substantial annual savings.

Customizable Reporting with LeakQ™

Fluke ii905 elevates your maintenance strategy by integrating robust reporting tools with the LeakQ online reporting tool. This localized PC application generates tailored reports that document leak detections, guide repair practices, and verify post-repair success.

Enjoy peace of mind knowing that your leak detection and maintenance strategies are backed by comprehensive, customizable documentation.

Why Choose the Fluke ii905 for Your Needs?

When selecting an acoustic imager, reliability, ease of use, and cutting-edge technology are paramount. The Fluke ii905 has been engineered to deliver exactly that. For a detailed comparison of models, consult the datasheet to ensure you select the best Fluke acoustic camera for your specific applications.

The Fluke ii905 Acoustic Imager is more than just a tool; it’s a comprehensive solution for reducing energy waste and enhancing maintenance efficiency across your operations.

Start optimizing your resources today with the Fluke ii905 and see the difference that advanced acoustic imaging and innovative LeakQ™ technology can make.

	Fluke ii500 Acoustic Imager	Fluke ii905 Acoustic Imager	Fluke ii915 Acoustic Imager
LeakQ™	Scale (1-10)	Leak size scale, leak rate, and leak cost estimation	Leak size scale, leak rate, and leak cost estimation
PDQ™			•
MecQ™			•
Features
WiFi / Bluetooth		•	•
Frequency	2 to 52 kHz	2 to 65 kHz	2 to 100 kHz
Detection range	Up to 50 m (164 ft)*	Up to 70 m (230 ft)*	Up to 120 meters (393 ft)*
Resolution	0.3 MP	5.0 MP	5.0 MP
Battery life	6 hours	6 hours	6 hours
Memory	20 GB (> 5000 pictures / > 999 videos)	32 GB (> 8000 pictures / > 1600 videos)	32 GB (> 8000 pictures / > 1600 videos)
Tripod connector		•	•

^{*Depending on ambient conditions}

The post Fluke ii905 Acoustic Imager with Innovative LeakQ™ Technology for Efficient Gas and Vacuum Leak Detection – Maximize Operational Efficiency and Energy Savings appeared first on rapid-tech.

Welcome to the future of leak detection with the Fluke ii500 Acoustic Imager. This cutting-edge tool is engineered to transform the way maintenance teams detect, locate, and manage gas leaks. With its advanced LeakQ™ technology, this imager stands as a pivotal instrument for industries where compressed gas systems are vital. Ensuring no leak goes unnoticed, the Fluke ii500 is designed with user-friendly features that require no prior expertise, making it accessible to both seasoned professionals and new users alike.

Advantages of Choosing the Fluke ii500

Effortless Leak Detection

The Fluke ii500 Acoustic Imager’s 7″ LCD touchscreen is a marvel of modern engineering, offering crystal-clear images overlaid with the innovative SoundMap™ feature. This unique overlay enables users to pinpoint leak sites swiftly, saving valuable time and resources. Whether you’re managing a busy production plant or ensuring the efficiency of a small facility, this imager guarantees prompt and precise leak detection.

Ready Out of the Box

Crafted with a rugged and ergonomic design, the Fluke ii500 is ready to deploy straight from the box. Its intuitive interface promises quick set-up times, allowing you to focus on identifying leaks and planning repairs. The device’s ease of use is complemented by its robust construction, ensuring durability and reliability in the most demanding environments.

Advanced Acoustic Technology

The integration of cutting-edge acoustic technology sets the Fluke ii500 apart. By isolating leak sound frequencies, it efficiently filters out background noise, making it suitable for even the noisiest industrial settings. This ensures that leaks remain visible and detectable, enhancing operational efficiency and safety.

Comprehensive Leak Management

Not only does the Fluke ii500 detect, but it also estimates leak size and cost, empowering maintenance teams to prioritize repairs effectively. The 1-10 LeakQ™ severity index, combined with the distance-estimation feature, delivers detailed insights into the impact of each leak, enabling informed decision-making and strategic maintenance planning.

Seamless Collaboration

Maximizing team productivity and collaboration, the Fluke ii500 comes equipped with a robust reporting tool. Share visuals, images, and tags efficiently among team members and repair personnel, ensuring everyone is aligned with the latest developments. The tagging, annotation, and folder organization facilitate exhaustive documentation and streamlined operations.

Ideal for Noisy Production Facilities

The Fluke ii500 isn’t just effective; it’s specifically designed for environments brimming with noise. The SoundSight™ technology embodied in this acoustic imager allows for unparalleled sound visualization, making even minuscule leaks visible.

Choosing the Right Acoustic Imager

If you’re assessing which acoustic imager best meets your organization’s needs, consider the Fluke ii500’s balance of innovation, ease of use, and comprehensive functionality. To delve deeper into technical specifications, consult the detailed datasheet.

	Fluke ii500 Acoustic Imager	Fluke ii905 Acoustic Imager	Fluke ii915 Acoustic Imager
LeakQ™	Scale (1-10)	Leak size scale, leak rate, and leak cost estimation	Leak size scale, leak rate, and leak cost estimation
PDQ™			•
MecQ™			•
Features
WiFi / Bluetooth		•	•
Frequency	2 to 52 kHz	2 to 65 kHz	2 to 100 kHz
Detection range	Up to 50 m (164 ft)*	Up to 70 m (230 ft)*	Up to 120 meters (393 ft)*
Resolution	0.3 MP	5.0 MP	5.0 MP
Battery life	6 hours	6 hours	6 hours
Memory	20 GB (> 5000 pictures / > 999 videos)	32 GB (> 8000 pictures / > 1600 videos)	32 GB (> 8000 pictures / > 1600 videos)
Tripod connector		•	•

^{*Depending on ambient conditions}

The post Fluke ii500 Acoustic Imager: Advanced Leak Detection Technology with SoundMap™ Overlay for Industrial Environments appeared first on rapid-tech.