• Range:0~3000 mlli-Tesla (mT),  0~30000 Gauss (G), Auto Ranging.
• DC N/S polarity of magnetic field display.
• The unit converts: 1mT=10G (Gauss)
• DC N/S polarity of magnetic field display.
• Relative / Peak Hold / Real time Zero function.
• LCD Back-light: Manually in a back-light to open And close, connect as connecting the power, in a back-light and long and on, it is in a back-light to connect the power and remove to close.
• DATA HOLD.
• MAX/MIN hold.
• GO and NO-GO alarm and alarm value set up the function, Production testing.
• Gauss/Tesla unit selection.
• Manual 200 capacity records.
• Auto 6000 capacity data logging, interval is set up by PC.
• Maximum and minimum average: record the data downloaded to the computer, automatically out of the calculation of the top 10 maximum / 10 minimum / average.
• Transmission interface: USB interface to send data + PC connection application software, real time function.
• Power: 9V AAA*6.
• Operating temperature and humidity: 5℃ ~ 40℃,
• External AC 100~240V to DC 9V/0.5A power supply.

Gaussmeter Applications:

• DC magnetic field meter measuring static magnetic strength.
• An electromagnetic wave (AC) simply means the wave motion of the electromagnetic field (EMF).
• Measuring extremely low frequency (ELF) of 40 to 500Hz.
• Capable of measuring the electromagnetic field radiation intensity that is produced from electric transmission equipment, lower line, microwave oven, air conditioner, refrigerator, computer monitor, video/audio device and so forth.
• The magnetic field unit is Tesla (T), Gauss (G),  milli-Gauss (mG) or micro-Tesla (uT).
• 1 T=10,000 G, 1uT=10 mG, 1 G=1,000 mG

Tenmars TM-197 Magnetic Field Gausmeter Specifications:

  Accuracy at 23 ±3ºC, RH<85%

Temperature

The post Tenmars TM-197 Magnetic Field Gaussmeter appeared first on rapid-tech.

Extech MF100 AC/DC Magnetic Field Meter Features:

The post Extech MF100 AC/DC Magnetic Field Meter appeared first on rapid-tech.

Extech SDL900 AC/DC Magnetic Meter/Datalogger Features:

The post Extech SDL900 AC/DC Magnetic Meter / Datalogger appeared first on rapid-tech.

DC Magnetic Field Measurement
Start using the Reed GU-3001 for DC magnetic field test by selecting the unit (mG or uT). For doing this, you will press the “Unit button”. For Zero Adjust press and hold the Zero Button until the screen displays a zero value and an “O” symbol. Press and hold the Zero Button again and the “O” symbol will disappear and the meter will return to showing the Environment’s magnetic field value.
Whit the instrument ready to measure the environment magnetic value, hold the probe sensor on or close to the testing material. The Display will show the magnetic field value along with the unit (mG, uT).

AC Magnetic Field Measurement
Switch to the AC the Measuring Mode by pressing the AC/DC Button. The meter is now in AC Magnetic Field Mode and the display will show a “AC” symbol.

Data Hold and Data Record (Max., Min. reading)
During the measurement you can activate the Data hold function by pressing the Hold Button. Now the measured value will hold on the screen. Press the REC Button once, and a ”REC. MAX.” symbol along with the maximum value will appear on the display. Press the REC Button again, and a “REC. MIN.” symbol along with the minimum value will appear on the display.

REED GU-3001 Specifications

• Measuring Range: -3000 to 3000mG, -300 to 300μT
• Resolution: 0.1mG: -199.9 to 199.9mG; 1mG:
  ≥200 or ≤ -200mG; 0.01μT: -19.9 to 19.9μT 0.1μT: ≥20 or ≤ -20μT
• Accuracy: ±(2% + 2mG)
• Frequency Response: AC /DC: 40 Hz to 10 KHz
• Field Direction: Uniaxial
• Sampling Time: A pprox. 1 second
• Data Output: RS 232/USB computer interface
• Power Supply: UM3/AA (1.5 V) x 6 batteries
• Dimensions: Meter: 173 x 68 x 42mm;
• Probe: 177 x 29 x 17mm
• Weight: Meter: 350g (0.lb); Probe: 78g (0.17lb)

The post Reed GU-3001 Electromagnetic Field Meter appeared first on rapid-tech.