• One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform
• Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
• Built-in 6,000 count True RMS MultiMeter with analog bargraph
• Easy-to-use pop-up menu with built-in multi-language system
• 23 Automatic Measurements
• Waveform Math: Add, Subtract, Multiply, and Divide
• Store and recall up to 1000 waveform screens and setups using the installed 2G microSD card
• Automatic cursor tracking measurements
• Pass-Fail function compares a stored waveform to an unknown input
• Average Mode for smoothing waveforms
• Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems
• Square Wave Output (2V, 1kHz) for probe adjustment
• Complete with two 1X/10X oscilloscope probes, test leads, 7.4V Li-Ion battery, universal AC charger, and carrying case

Specifications	MS6100
Bandwidth	100MHz
Sample rate per channel	500MS/s
Risetime	3.5ns
Timebase Range	4ns/div to 40s/div
Common Features/Functions
Oscilloscope Functions
Record Length                                         1M points per channel
Display Size                                             5.6″ (142mm) color LCD; 640 x 480 pixels
Channels                                                 2
Vertical Sensitivity                                    2mV/div to 5V/div
Vertical Resolution                                   8 bits
Glitch Capture                                         Yes
Sample Mode                                          Normal, Average, Peak Detect
Trigger Modes                                          Edge, Pulse, Alt, Video, Slope
Trigger Source                                         CH1, CH2
Trigger Coupling                                      AC, DC, LF, HF, Noise Reduction
Input impedance                                      1MΩ/20pF
Max Input Voltage                                    300V (peak)
Cursor Measurement                               Voltage and time; Delta (CH1-CH2)
True RMS MultiMeter Functions
AC Voltage                                              60mV, 600mV, 6V, 60V, 600V
DC Voltage                                              60mV, 600mV, 6V, 60V, 600V, 800V
AC/DC Current                                        60mA, 600mA, 10A
Resistance                                               600Ω, 6kΩ, 60kΩ, 600kΩ, 6MΩ, 60MΩ
Capacitance                                            5nF to 400μF
Diode and Continuity                               Yes
Power Supply                                          3 hours Li-ion rechargeable battery; AC Charger
Dimensions/Weight                                  245 x 163 x 52mm / 1.2kg

• One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform
• Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
• Built-in 6,000 count True RMS MultiMeter with analog bargraph
• Easy-to-use pop-up menu with built-in multi-language system
• 23 Automatic Measurements
• Waveform Math: Add, Subtract, Multiply, and Divide
• Store and recall up to 1000 waveform screens and setups using the installed 2G microSD card
• Automatic cursor tracking measurements
• Pass-Fail function compares a stored waveform to an unknown input
• Average Mode for smoothing waveforms
• Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems
• Square Wave Output (2V, 1kHz) for probe adjustment
• Complete with two 1X/10X oscilloscope probes, test leads, 7.4V Li-Ion battery, universal AC charger, and carrying case

Extech MS6060 Specifications:

Specifications
Bandwidth	60MHz
Sample rate per channel	500MS/s
Risetime	5.8ns
Timebase Range	4ns/div to 40s/div
Common Features/Functions
Oscilloscope Functions
Record Length                                         1M points per channel
Display Size                                             5.6″ (142mm) color LCD; 640 x 480 pixels
Channels                                                 2
Vertical Sensitivity                                    2mV/div to 5V/div
Vertical Resolution                                   8 bits
Glitch Capture                                         Yes
Sample Mode                                          Normal, Average, Peak Detect
Trigger Modes                                          Edge, Pulse, Alt, Video, Slope
Trigger Source                                         CH1, CH2
Trigger Coupling                                      AC, DC, LF, HF, Noise Reduction
Input impedance                                      1MΩ/20pF
Max Input Voltage                                    300V (peak)
Cursor Measurement                               Voltage and time; Delta (CH1-CH2)
True RMS MultiMeter Functions
AC Voltage                                              60mV, 600mV, 6V, 60V, 600V
DC Voltage                                              60mV, 600mV, 6V, 60V, 600V, 800V
AC/DC Current                                        60mA, 600mA, 10A
Resistance                                               600Ω, 6kΩ, 60kΩ, 600kΩ, 6MΩ, 60MΩ
Capacitance                                            5nF to 400μF
Diode and Continuity                               Yes
Power Supply                                          3 hours Li-ion rechargeable battery; AC Charger
Dimensions/Weight                                 245 x 163 x 52mm / 1.2kg

• Auto-set function optimizes the position, range, timebase, and triggering to assure a stable display of waveforms
• Peak Detect function for 50ns glitch capture
• XY Mode and FFT function to view component frequencies
• Twenty Automatic Measurements including Frequency, Cycle, Average, Peak to Peak, RMS and more
• Waveform Math: Add, Subtract, Multiply, and Divide
• Average Mode for smoothing waveforms
• Persistence Mode for observing dynamic signals
• Store and recall up to 4 waveform screens and setups
• USB interface and software for transferring waveforms and data