Welcome to the next generation of oscilloscope technology, the R&S MXO 5 Series, explicitly designed to meet and surpass all your electronic testing challenges. This revolutionary technology is your passport to a more efficient understanding and testing of electronic systems.

With models boasting impressive four and eight channel capabilities, the R&S®MXO 5 is in a league of its own. Its superior specifications stand as a testament to its top-notch performance in the industry.

R&S®MXO 5 Series, base models

Why Choose the R&S®MXO 5? Discover the Benefits of this Outstanding Product

Discover the power of performance with the R&S®MXO 5, a true game-changer in the realm of speed and precision. This cutting-edge device boasts rapid acquisitions with multiple channels, math functions and an impressive 21 ns rearm time for minimal blind time. With its unparalleled spectrum analysis capabilities, it allows for simultaneous operation of up to four analyses, delivering fast and pristine results.

The R&S®MXO 5 stands as a testament to uncompromised performance, offering the highest vertical offset range of ±5 V at 0.5 mV/div for exceptional signal fidelity. It features a low noise floor and the industry’s most sensitive trigger down to a remarkable 0.0001 div. Coupled with the best-in-class trigger jitter of less than 1 ps, it promises flawless digital triggering at 18-bit HD resolution with adjustable sensitivity.

Equipped with the deepest standard memory in its class, the R&S®MXO 5 can handle up to 1 million waveform segments. With a 12-bit ADC/18-bit HD resolution, it delivers the highest precision. Furthermore, it provides deep memory capture with 500 million points/channel and the industry’s fastest acquisitions at a staggering 4.5 million waveforms/s.

The R&S®MXO 5’s impressive features are complemented by a stunning 15.6″ Full HD touchscreen, offering increased visibility and user convenience. It covers a bandwidth range from 100 MHz to 2 GHz and boasts an impressive sample rate of up to 5 Gsample/s.

Experience the evolution in speed, precision, and sensitivity with the R&S®MXO 5. The ultimate choice for those seeking unparalleled performance.

Embracing cutting-edge technology in power conversion testing, the R&S®MXO 5 is a revolutionary solution geared towards facilitating the growth and development of wide bandgap power semiconductors, a vital component of renewable energy and electrification. With eight channels offering comprehensive visibility of three-phase and six-phase motor drives and inverters, the R&S®MXO 5 provides an unmatched testing performance.

POWER SEQUENCING AND INTEGRITY

The R&S®MXO 5 ensures flawless power sequencing, a critical aspect of all electronic circuits. Equipped with the ability to observe up to eight analog channels and reference waveforms concurrently, it guarantees precise power amplitude at the right time. It comes with a standard 500 Mpoints, crucial for recording over extended periods and achieving a substantial sample rate for observing small signal events.

AUTOMOTIVE ANALYSIS

In the rapidly evolving world of electric motors and inverters, the R&S®MXO 5 provides vital insight into their efficiency and drive power. With its eight channels, it can monitor PWM controlled gates, critical for multiphase topologies. It’s the ideal tool for assessing compliance requirements and decoding automotive protocol in the emerging domain controller networks seen in autonomous and smart cars.

SIGNAL INTEGRITY AND DEBUGGING

For signal testing where error detection is paramount, the R&S®MXO 5 offers a waveform acquisition rate of over 4.5 million. It can detect rare and sporadic events that other oscilloscopes might miss, even with up to four channels activated. With four hardware-accelerated spectrum channels, it can perform up to 180,000 FFT/s, ideal for testing and debugging harmonic, EMI, or other applications requiring superior spectrum capabilities.

ACCELERATED INSIGHTS

With over 4.5 million acquisitions/s, the R&S®MXO 5 is the world’s first 8-channel oscilloscope designed to reveal infrequent anomalies instantly. Its real-time signal capture is up to 90%, thanks to the MXO-EP ASIC and a dedicated PC system for responsive analysis.

CAPTURE EVEN MORE TIME

The R&S®MXO 5 comes with the industry’s deepest memory on eight channels, standard segmented memory, and history mode. These features ensure comprehensive coverage and analysis of data over time.

SEE SIGNALS ACCURATELY

The R&S®MXO 5 boasts the lowest measurement noise and highest vertical resolution on eight channels. Features like a 12-bit ADC, 18-bit architecture with HD mode, and low noise of 130 μV contribute to its accuracy.

TRIGGER ON EVERY DETAIL

The high precision digital trigger on the R&S®MXO 5 is a world-first for 8-channel oscilloscopes, with a sensitivity down to 0.0001 vertical division and user-adjustable trigger hysteresis.

MULTISPECTRAL EVOLUTION

With 12 pristine RF measurements and more capabilities, the R&S®MXO 5 is the first 8-channel oscilloscope boasting 4 spectra with independent time and frequency control.

SUPERIOR USER EXPERIENCE

With its toolbar, advanced usability and R&S®SmartGrid, the R&S®MXO 5 offers an unparalleled user experience, making it a definitive choice in the industry.

The post R&S MXO 5 Oscilloscope |- Revolutionary 8-Channel and 4-Channel Oscilloscopes with Advanced Power Conversion Testing, Automotive Analysis, and Superior Signal Integrity Capabilities appeared first on rapid-tech.

See the big picture with up to 1.5 GHz of bandwidth and 5 Gsample/s sample rate. The large 13.3” Full HD capacitive touchscreen with SmartGrid waveform layout, color-coded controls, and clear menus making it easy to see complex waveforms. No other oscilloscope in the world updates faster in real-time, at a rate of 4.5 million acquisitions per second. With this kind of detail and signal visibility, engineers can spot rare events as they happen.

The Rohde & Schwarz MXO 4 Series Oscilloscope is a powerful instrument that offers a standard acquisition memory of 400 Mpoints on all four channels. With an optional 800 Mpts interleaved (400 Mpts- 4 chanels, 800 Mpts – 2 chanels ), the oscilloscope has up to 100 times the standard memory of comparable instruments.

R&S MXO 4 is ideal for general purpose measurement, serial data analysis, jitter analysis, embedded design verification, frequency response analysis, and more. No matter what your application, the R&S MXO 4 Series has the power and flexibility to handle it. From basic signal analysis to advanced embedded design debug, these oscilloscopes have the features and performance you need to get the job done right.

See your signals with clarity, the highest vertical resolution and the lowest measurement noise.

The best user experience

Advanced usability and ease of use, as well as fast remote control, are all included in the interface.

1 – Toolbar  |  2 – Main menu  |  3 – Signal activators  |  4 – R&S®SmartGrid  |  5 – Signal toolbar  |  6 – Box design

The post R&S MXO 4 Series Oscilloscope -| > 4.5 million wfms / sec, 12-bit ADC 18-bit HD, 400 Mpts memory /ch, Digital trigger appeared first on rapid-tech.

Click image

The post Rohde & Schwarz Oscilloscope Software appeared first on rapid-tech.

High-bandwidth probes are only possible through the use of application-specific integrated circuits (ASIC). Rohde&Schwarz designs these ASICs with particular attention to performance. Low noise, high DC accuracy and minimal drift versus temperature and time are the result.

Individual laser trimming of the probes during production results in particularly high accuracy and a very flat frequency response. The design of the contact accessories also permits a high measurement bandwidth for various contacting methods, including manual contacting, soldering and plug-in connections.

The compact probe head allows measurements even on densely populated printed boards, and the low weight ensures a minimal load at the contact point.

Minimal influence on the measurement signal

When measuring the high-speed signals used in modern electronic designs, the load from the probe must be kept low. Rohde&Schwarz active probes meet this requirement with 1 MΩ input impedance and an input capacitance of < 1 pF. As a result, the probe’s influence on the circuit during measurement is minimized.

The optimized design of the probe tips and accessories ensures accurate rise times and minimizes overshoot and ringing.

Wide dynamic range and high linearity – perfect for spectrum analysis

All Rohde & Schwarz active broadband probes exhibit a wide dynamic range, which is also available at high frequencies. This means that even very fast signals and steep, high-amplitude pulse slopes can be measured.

For measurements involving particularly stringent linearity requirements (such as FFT analyses using the R&S RTO oscilloscopes), an excellent choice is the R&S RT-ZS60 single-ended probe with its exceptionally high linearity (THD of –70 dB at 16 V (peak-to-peak) at 1 GHz). The optional R&S®RT-ZA9 N(m) adapter allows Rohde & Schwarz broadband p

The post R&S Active Broadband Oscilloscope Probes appeared first on rapid-tech.

They feature an extremely low input capacitance and particularly low noise. Their purely passive implementation renders them highly linear and therefore ideal for spectrum analysis applications

The R&S RT-ZZ80 8 GHz probe provides an attenuation factor of 10:1 at an input impedance of 500 Ω || 0.3 pF. Its SMA plug is connected to the oscilloscope via the provided SMA-BNC adapter. The probe can be easily selected as a predefined probe from the R&S RTO oscilloscope menu. And with these simple steps, the instrument is correctly configured.

Maximum bandwidth through customized accessories The maximum probe bandwidth is typically defined by the accessories that are used. Rohde & Schwarz supplies accessories tailored to both the probe and the application to ensure that the maximum bandwidth is available for various contacting methods. The extensive standard accessories for the R&S RT-ZZ80 include solder-in pins, rigid tips, solder-in ground pins, spring-loaded ground tips and adapters for pin connectors.

Because all probe tips have the same design, the R&S RT-ZZ80 accessories are compatible with both single-ended and differential active probes (R&S RT-ZS60 and R&S RT-ZD40).

The post R&S Passive Broadband Oscilloscopes Probes appeared first on rapid-tech.

R&S RT-Zxx Standard Passive Oscilloscope Probes are the perfect accessory for general measurement applications involving low frequency signals. The very fine, spring-loaded tip allows precise and reliable contacting of signal lines.

Rohde & Schwarz passive probes are the all-rounders in the world of probes. They are low-cost, general purpose probing solutions for a broad range of applications. The BNC connector allows them to be used on almost any oscilloscope.

Passive probes with readout pin enable Rohde & Schwarz oscilloscopes to automatically detect the attenuation factor. A spring-loaded tip ensures good contact with the device under test.

Rohde & Schwarz Digital Oscilloscopes Probes & Accessories Brochure

The post R&S RT-Zxx Standard Passive Oscilloscope Probes appeared first on rapid-tech.

With bandwidths from 200 MHz to 2 GHz and top performance parameters, the R&S RTE oscilloscopes set standards in their class:

• Highest sampling rate of 5 Gsample/s and deepest memory of 200 Msample for accurate acquisition of long signal sequences
• Acquisition rate of more than one million waveforms/s for finding signal faults quickly
• Extremely low-noise  frontends and 16-bit vertical resolution in high definition mode for precise results
• Highly accurate digital trigger system with virtually no jitter for triggering on smallest signal details in realtime.

Tools such as QuickMeas, fast mask tests, powerful spectrum analysis, history function and 77 automatic  measurement functions are supplied as standard. Results are available fast thanks to hardware-assisted implementation of the measurement tools in the Rohde&Schwarz ASIC. The results are based on a large number of waveforms to provide statistically conclusive information.

R&S RTE oscilloscopes support dedicated application solutions for complex analyses, including trigger and decoding options for serial protocols and a power analysis option. The mixed signal option provides 16 digital channels for analyzing logical components in embedded designs.

The powerful R&S RTE is impressively easy to use thanks to its high-resolution 10.4″ XGA touchscreen.

Full measurement bandwidth, even at 500 µV/div

Thanks to very low-noise frontends, the R&S®RTE oscilloscopes offer an input sensitivity down to 500 µV/div. This is unmatched on the market. Other oscilloscopes attain 1 mV/div sensitivity only by employing software-based zooming or by limiting the bandwidth. R&S®RTE oscilloscopes, however, show a signal’s real sampling points over the full measurement bandwidth, even at 500 µV/div sensitivity. This high measurement accuracy is particularly beneficial when measuring small signal amplitudes

The post R&S RTE1000 Oscilloscopes 200 MHz to 2 GHz appeared first on rapid-tech.

A Rohde & Schwarz designed 10-bit ADC combined with class-leading low noise, memory depth and timebase accuracy gives you sharp waveforms, more accurate measurements and confidence when facing unexpected measurement challenges.

The 10-bit A/D converter yields up to a fourfold improvement over conventional 8-bit A/D converters. The class leading low noise allows users to take advantage of this extra vertical resolution. You get sharper waveforms with signal details that would have been hidden on other oscilloscopes in this class.

500 µV/div: full measurement bandwidth

The R&S RTA4000 oscilloscope offers outstanding sensitivity down to 500 µV/div. Traditional oscilloscopes can only reach this level of input sensitivity by employing software-based magnification of larger settings or by limiting the bandwidth. The R&S RTA4000 oscilloscope shows the signal’s real sampling points over the full measurement bandwidth – even at 500 µV/div.

Class-leading low noise

Higher resolution is only beneficial if the extra bits are not consumed by the noise of the oscilloscope. The R&S RTA4000 has class-leading low noise that allows you to take advantage of the extra bits of resolution and see signals that are hidden in the noise of other oscilloscopes.

Deep memory: standard 100 Msample per channel and 200 Msample interleaved

The R&S RTA4000 offers class-leading memory depth: 100 Msample per channel, 200 Msample in interleaved mode. This is up to 10 times more than similar oscilloscopes in the same instrument class. Maintaining a fast sample rate is directly tied to acquisition memory.

With its deep memory, the R&S RTA4000 captures longer periods of time at high sample rates, giving you extra insurance for unexpected project requirements.

Class-leading timebase accuracy

With a timebase accuracy of ±0.5 ppm, the R&S RTA4000 is 5 to 20 times better than other instruments in its class.

An excellent timebase is important to ensure accurate measurements over long time captures.

Grows with your needs

The R&S RTA4000 oscilloscopes flexibly adapt to needed project updates. You simply install the necessary software licenses, e.g. triggering and decoding of serial protocols.

The waveform and pattern generator and MSO capabilities 1) are built-in and just need to be activated. The bandwidth can be upgraded up to 1 GHz via keycode. All this makes retrofitting really easy.

Connectivity

The R&S RTA4000 can be directly connected to a PC via the built-in USB host and USB device ports. The USB host transfers screenshots and instrument settings to a USB stick. Media transfer protocol (MTP) implementation ensures seamless integration.

The USB device port and the LAN interface enable remote control. The built-in web server functionality allows you to control the oscilloscope and display your screen content to an audience. Data and programming interfaces are included, e.g. for seamless MATLAB® integration.

The post R&S RTA4000 Oscilloscope 4 Channels 200MHz to 1GHZ appeared first on rapid-tech.

Dedicated operating modes for frequency analysis, mask tests and long data acquisitions are integrated. You can quickly and efficiently debug all kinds of electronic systems.

10-bit vertical resolution

The R&S RTM3000 features a customized Rohde & Schwarz designed 10-bit A/D converter that delivers a 4x improvement over conventional 8-bit A/D converters.
The increased resolution results in sharper waveforms with more signal details that would otherwise be missed.
One example is the characterization of switched-mode power supplies. The voltages across the switching device must be determined during the on/off times within the same acquisition. For precise measurements of small voltage components, a high resolution of more than 8 bit is essential.

500 µV/div: full measurement bandwidth and low noise

The R&S RTM3000 oscilloscope offers outstanding sensitivity down to 500 µV/div. Traditional oscilloscopes can only reach this level of input sensitivity by employing software-based magnification or by limiting the bandwidth.
The R&S RTM3000 oscilloscope shows the signal’s real sampling points over the full measurement bandwidth – even at 500 µV/div. This ensures high measurement
accuracy.
The accuracy of the signal displayed on the screen depends on the oscilloscope’s inherent noise. The R&S RTM3000 oscilloscope precisely measures even at the smallest vertical resolution by using low-noise frontends and state-of-the-art A/D converters.

R&S RTM3000 Oscilloscope Specification

The post R&S RTM3000 Oscilloscopes, 100 to 1000MHz appeared first on rapid-tech.

Great value
The Rhode & Schwarz RTC1002 Oscilloscope offers the functionality of an oscilloscope, logic analyzer, protocol analyzer, frequency analyzer, pattern generator, function generator, digital voltmeter and component tester.

With a sampling rate of up to 2 Gsample/s and a memory depth of up to 2 Msample, the RTC1000 oscilloscope excels in its class. A waveform update rate of more than 10,000 waveforms/s ensures a responsive instrument that reliably catches signal faults. Included tools provide quick results, e.g. QuickView, mask tests, FFT, math, cursors and automatic measurements (including statistics).

Features:

• 50 MHz; upgradeable to 70, 100, 200 and 300 MHz
• 2 analog channels, plus 8 digital channels with MSO option
• Maximum sampling rate (Gsamples/s) 1.25/channel, 2.5 interleaved
• 2 Msample memory depth
• state-of-the-art A/D converters for low-noise measurements
• 640 x 480 px. 6.5″ VGA color display
• Wide selection of automatic measurement functions
• QuickView: key results at the press of a button
• Mask test: easy creation of a new mask with just a few keystrokes
• Eight-in-one instrument
• Three-year warranty

The post R&S RTC1000 series Oscilloscopes 50 MHz to 300 MHz appeared first on rapid-tech.