The MI3136 is already a serious instrument — 12 tests, a modern touch screen, AS/NZS 3017 preset limits, and Metrel Cloud reporting built in from day one. But when you order the standard unit, you’ll need to source a carry bag and a few essential accessories separately before it’s fully field-ready.

The MI3136 Kit solves that in one order. Everything ships together — the instrument plus the five accessories that experienced electricians reach for first — at a combined price that’s noticeably lower than buying them individually. For contractors equipping a new van, a new employee, or replacing a worn-out kit, this is the straightforward option.

What’s in the Kit — and Why Each Item Matters

A1551 Large Padded Carry Bag for XC/XD

The MI3136 doesn’t include a carry bag in its standard set, and an instrument costing close to $2,000 deserves proper protection in transit. The A1551 is sized for the MI3136 and its full accessory complement — probes, leads, clips, and adapters all stored together, protected, and organised. Whether it’s going in a van, onto a work site elevator, or into a panel room, a padded bag is not a luxury — it’s practical asset protection.

A1401 Remote Probe for XC/XD

Think of this as the equivalent of a Fluke TP165x for the Metrel system. The A1401 Remote Probe extends your reach into distribution boards, ceiling-mounted outlets, back-of-panel terminals, and tight cabinet spaces where your standard test probes physically won’t fit or can’t be held safely. On any commercial or industrial site with recessed switchgear, this probe earns its place in the first hour on the job.

A1195 Resistor Box

The Resistor Box enables verification of your RCD test results and continuity measurements using a known reference resistance — important for confidence-checking your instrument’s readings when fault-finding produces unexpected results. It’s also relevant for demonstrating traceability when your test reports are scrutinised by a building inspector or compliance auditor.

A1012 Trailing Lead — 4 m Green

While the MI3136’s socket test function works without a trailing lead for standard outlet verification, a 4 m green trailing lead is essential for earthing continuity tests back to a known earth reference — particularly on dead installation testing where the socket circuit isn’t yet energised. It also extends your reach for PE bonding measurements across larger floor areas. Green is the correct colour coding for earth connections under Australian wiring rules.

MD-106 Non-Contact Voltage Detector

Before you plug your probe into anything, you need to know whether it’s live. The MD-106 is a simple, reliable non-contact voltage detector that adds a critical layer of personal safety to every site visit. It’s the first thing you pick up and the last thing you put down — and having it paired with your installation tester from day one reinforces safe working practice.

Everything Else Stays the Same

The instrument in the MI3136 Kit is identical to the standard MI3136:

• 12 installation tests covering every mandatory function under AS/NZS 3017
• 4.3-inch colour TFT touch screen with Pass/Fail evaluation
• Socket testing without a trailing lead
• Auto-Sequences (up to 6 tests per push-button sequence)
• Real-time monitoring of all three voltages simultaneously
• Built-in fuse tables for automatic loop impedance evaluation
• Bluetooth + Wi-Fi + USB Type-C connectivity
• Metrel Cloud and Metrel ES Manager BASIC licence included
• Optional A-1532XA EVSE Adapter for EV charging station testing
• 600 V CAT III / 300 V CAT IV overvoltage rating

For full technical specifications, see the Metrel MI3136 product page.

Technical Specifications

Full instrument specifications are identical to the MI3136 standard set. See the MI3136 product page for the complete specification table.

AEO Answer Blocks

What’s the difference between the Metrel MI3136 and the MI3136 Kit?

The MI3136 Kit contains the same MI3136 InstalTest COMBO XC instrument as the standard set, plus five field accessories: an A1551 Large Padded Carry Bag, an A1401 Remote Probe, an A1195 Resistor Box, an A1012 4 m Green Trailing Lead, and an MD-106 Non-Contact Voltage Detector. The standard MI3136 does not include a carry bag or these accessories. The Kit is priced at $2,590 + GST vs $1,990 + GST for the standard unit.

Is the MI3136 Kit better value than buying accessories separately?

Yes. The MI3136 Kit is priced below the total cost of the MI3136 plus the five included accessories purchased individually. The combined saving is approximately $166 + GST, with the added convenience of a single order and everything arriving together ready for immediate deployment.

What is the A1401 Remote Probe used for?

The A1401 Remote Probe is a handheld probe that extends the MI3136’s reach into locations that standard probes can’t easily access — distribution board terminals, recessed socket outlets, ceiling-mounted GPOs, and equipment cabinet connection points. It functions similarly to the Fluke TP165x and is particularly useful on commercial and industrial installations where testing at panel-mounted connections is part of the scope.

Why does the MI3136 need a trailing lead if it can test sockets without one?

The MI3136’s no-trailing-lead socket test covers outlet verification — earth continuity, polarity, and correct connections at the socket face. A trailing lead (A1012) is still needed for dead installation testing (where circuits aren’t yet energised), earth continuity measurements back to a reference point, and PE bonding verification across longer distances. The 4 m green lead in the kit covers these scenarios.

The post Metrel MI3136 Kit InstalTest COMBO XC — Advanced Set with Bag & Accessories appeared first on rapid-tech.

Every licensed electrician knows the problem. You show up to a new build or a periodic inspection and you’re lugging a multimeter, an insulation tester, an RCD tester, a loop impedance tester, and a phase sequence tester — all needing their own cables, batteries, and firmware. Then come the reports. Handwritten notes, manually assembled spreadsheets, chasing down job numbers at the end of the week.

The Metrel MI3136 InstalTest COMBO XC was designed to fix exactly that. It replaces those five instruments with a single touch-screen unit that runs 12 distinct tests, stores your results, and produces professional PDF reports — ready to hand to a client or file for compliance records. This is what it looks like when Metrel takes a decade of installation testing experience and rebuilds it from the ground up for today’s electrical trades.

Built for AS/NZS 3017 Compliance from Day One

Australian installation testing isn’t optional — and neither is accuracy. The MI3136 has Pass/Fail limits preset to AS/NZS 3017, so there’s no second-guessing whether a loop impedance result actually passes or whether you need to cross-reference a fuse table manually. The built-in fuse tables handle that evaluation automatically based on the selected area group. Built-in help screens give on-site guidance when you need it, without pulling out a manual.

For initial verification and periodic inspection of low-voltage TT and TN systems — the bread and butter of residential and commercial electrical work under AS/NZS 3000 — the MI3136 covers every mandatory test:

• Continuity at 200 mA (for earth resistance and equipotential bonding) and 7 mA (for general resistance)
• Insulation resistance at 50V, 100V, 250V, 500V, and 1000V test voltages
• RCD testing — trip time and trip current for 10 mA through 1000 mA, with 0° and 180° starting polarity
• Fault loop impedance (L-PE, L-L, L-N) and prospective short-circuit current
• Line impedance
• Phase sequence and rotation
• Live socket testing — earth continuity, polarity, and correct connections, Pass/Fail without a trailing lead
• Earth resistance (3-wire measurement)
• Voltage and frequency measurement to 550 V / 499.9 Hz
• Contact voltage

All results display on a 4.3-inch colour TFT touch screen with real-time monitoring of all three voltages simultaneously. Automatic polarity reversal on continuity keeps testing moving without manual reset.

Sockets in Seconds — No Trailing Lead Required

One of the most time-consuming aspects of socket testing on larger jobs is running trailing leads across a floor or down a hallway for every outlet. The MI3136 eliminates that step entirely. Its socket test function checks earth continuity, polarity, and correct connections in a single push-button operation — directly from the socket, no trailing lead needed.

Combine that with Auto-Sequences that chain up to six individual tests into one push-button sequence, and high-volume socket testing on large residential or commercial installations becomes significantly faster. Auto-sequences can be configured for standard installation verification workflows, or customised for specific job types — RCD-heavy commercial work, new subdivision wiring, or periodic inspections under a specific test regime.

Record, Report, and Move On

Paper-based test records are a liability. A missed entry, an illegible reading, or a misfiled result creates compliance exposure you don’t want. The MI3136 stores test results internally and connects via Wi-Fi and Bluetooth to Metrel Cloud — allowing you to manage test structures, upload results from the field, and generate professional PDF reports without returning to a PC first.

Back at the office or workshop, Metrel ES Manager (BASIC licence included) lets you build test structures, manage customer job histories, and produce polished reports for clients and regulators. For contractors managing multiple jobs simultaneously, the Metrel Cloud App extends this to mobile devices — giving you live visibility across active jobs.

EV Charging Station Testing Ready

With EV charging infrastructure rolling out across Australian residential, commercial, and light-industrial sites, the capacity to test Mode 3 EVSE charging stations is increasingly part of an electrician’s scope of work. The MI3136 supports the optional A-1532XA EVSE Adapter, which turns the tester into a dedicated EVSE verification tool for Type 2 charging stations — performing electrical safety and functional testing from a single push button and generating compliant test reports.

Note: The A-1532XA adapter is available separately. For field technicians working on EV charging installation projects, this represents a practical capability extension without investing in a standalone EVSE tester.

Remote Probe for Difficult Access

Like the Fluke TP165x, the optional A1401 Remote Probe allows the MI3136 to reach sockets and test points in panel boards, cabinets, and ceiling-mounted outlets where the standard probe set can’t reach comfortably. This is particularly useful on large commercial or industrial sites where distribution board testing is part of the scope. The Remote Probe is included in the MI3136 Kit — or available separately.

What the MI3136 Is (and What It Isn’t)

The MI3136 is Metrel’s newest mid-range installation tester — the direct replacement for the MI3152, which is now at end of stock. It covers every mandatory installation test that Australian electricians need to perform under AS/NZS 3017, plus EV charging station verification with the optional EVSE adapter.

It’s worth being clear about one trade-off: the MI3136 does not support the extended adapter ecosystem available on the MI3155 EurotestXD. If your scope of work regularly includes luxmeter measurements (emergency lighting inspections), cable tracing with the R10K receiver, or current clamp-based earth resistance testing, the MI3155 remains the appropriate choice. The MI3136 is purpose-designed for installation verification — it does that job thoroughly, efficiently, and with professional reporting built in, at a more accessible price point.

In the Box — Standard Set

The MI3136 ships with a complete standard accessory set:

• Test probes × 3 (Brown, Blue, Green)
• Crocodile clips × 3 (Brown, Blue, Green)
• Test cable, BRN/GRN/BLU, 1.5 m
• Test cable, 1.5 m
• USB Type-C cable
• Rechargeable Li-ion battery pack (7.2 V / 5200 mAh)
• Calibration certificate
• Metrel ES Manager BASIC Licence

Note: The MI3136 standard set does not include a carry bag. For a complete field-ready kit with padded bag, remote probe, resistor box, trailing lead, and non-contact voltage detector, see the MI3136 Kit ($2,590 + GST).

Technical Specifications

What does the Metrel MI3136 replace?

The Metrel MI3136 InstalTest COMBO XC replaces five separate instruments: a multimeter, an insulation tester, an RCD tester, a loop impedance tester, and a phase sequence tester. It performs 12 distinct tests in a single portable unit and is the direct replacement for the discontinued Metrel MI3152.

---

Is the Metrel MI3136 compliant with Australian installation testing standards?

Yes. The MI3136 has Pass/Fail limits preset to AS/NZS 3017 and covers all mandatory tests required for initial verification and periodic inspection of low-voltage electrical installations under AS/NZS 3000. Built-in fuse tables automatically evaluate loop impedance results against the appropriate fuse rating for the selected area group.

---

Can the Metrel MI3136 test EV charging stations?

Yes, with the optional A-1532XA EVSE Adapter. When fitted, the MI3136 can perform electrical safety and functional verification of Mode 3 AC electric vehicle charging stations with Type 2 connectors — including single push-button EVSE test sequences and professional PDF report generation. The adapter is sold separately.

---

What is the difference between the MI3136 and the MI3155?

The MI3136 is Metrel’s mid-range installation tester, covering all mandatory tests under AS/NZS 3017 with touch-screen operation, auto-sequences, and Metrel Cloud reporting. The MI3155 EurotestXD is Metrel’s flagship industrial instrument and supports a broader adapter ecosystem — including luxmeter sensors, cable tracers (R10K receiver), current clamp accessories, and advanced TRMS measurements. The MI3136 does not accept these extended adapters. Electricians whose scope of work includes emergency lighting lux measurement, cable tracing, or current clamp-based earth resistance testing should consider the MI3155 instead.

Does the Metrel MI3136 include a carry bag?

No. The MI3136 standard set does not include a carry bag. A soft padded bag (A1289) and a large padded bag (A1551) are available as optional accessories. The MI3136 Kit includes the A1551 Large Padded Carry Bag plus a Remote Probe, Resistor Box, 4 m Green Trailing Lead, and Non-Contact Voltage Detector as a ready-to-field bundle.

---

Can the MI3136 test sockets without a trailing lead?

Yes. The MI3136’s socket test function verifies earth continuity, correct polarity, and correct wiring connections directly from the socket outlet — without requiring a trailing lead. This is combined with Push-button Auto-Sequences (up to 6 tests per sequence) to enable fast, high-volume socket verification on residential and commercial installations.

---

What reporting software does the Metrel MI3136 use?

The MI3136 includes Metrel ES Manager BASIC, which enables test structure creation, result management, and professional PDF report generation via PC. Wi-Fi and Bluetooth connectivity allow direct upload to Metrel Cloud Storage (optional licence), with the Metrel Cloud App providing mobile access for field-based job management. Advanced reporting functionality is available with the MESM PRO licence upgrade.

The post Title: Metrel MI3136 InstalTest COMBO XC — Multifunction Installation Tester Australia appeared first on rapid-tech.

Running an efficient test-and-tag operation in Australia means juggling multiple demands. You need to meet strict AS/NZS 3760 compliance requirements while maintaining productivity across diverse equipment types. Traditional testing setups often require separate devices for testing, printing labels, and managing records – turning what should be straightforward compliance work into a time-consuming administrative burden.

When you’re pricing jobs competitively and scheduling multiple sites per day, equipment downtime or complicated workflows directly impact your bottom line. Your clients expect professional documentation, rapid turnaround, and absolute confidence in test results. Meanwhile, you’re dealing with everything from basic power tools through to sensitive electronics, 3-phase equipment, and increasingly common EV charging cables – each with their own testing protocols.

The equipment you rely on needs to handle the full spectrum of Australian workplace electrical testing while keeping pace with the fast-moving demands of commercial, industrial, and residential compliance work.

A Purpose-Built Solution for Australian Electrical Safety Professionals

The Metrel MI3340 AlphaEE XA Complete Kit delivers everything needed for professional portable appliance testing in a single, integrated package. This isn’t just a tester with accessories thrown in – it’s a carefully engineered system designed around the real-world workflow of Australian test-and-tag operators.

At the heart of the kit sits the MI3340 AlphaEE XA tester, combining comprehensive AS/NZS 3760 compliance testing with an ergonomic design that redefines portable testing convenience. The lightweight housing enables genuine one-handed operation during extended testing runs, while the intuitive touchscreen interface eliminates the learning curve that slows down new operators or occasional users.

What sets this complete kit apart is the integration of professional-grade documentation tools. The included Zebra ZQ521 Bluetooth printer produces durable test tags complete with QR codes, test dates, and custom branding – all wirelessly from the tester. Pair this with the pocket-sized Socket S740 barcode scanner, and retest workflows become remarkably efficient. Simply scan the existing tag’s QR code to auto-populate equipment details and testing history, eliminating repetitive data entry and reducing testing time by up to 40%.

The system operates entirely on high-capacity Li-ion batteries – both tester and printer – giving you genuine portability across facilities, construction sites, or multi-level buildings without hunting for power outlets. When you do need to recharge, rapid charging technology gets you back to full capacity during a lunch break.

All equipment arrives secured in a heavy-duty carry case with custom foam inserts, protecting your investment during transport and providing organized storage for leads, probes, and accessories. This professional presentation extends to client interactions – arriving with organized, purpose-built equipment reinforces your expertise and attention to detail.

Comprehensive Testing Capability That Grows With Your Business

The MI3340’s testing functions cover the complete AS/NZS 3760 standard requirements, but the capability extends well beyond basic compliance. Pre-programmed AutoSequence testing protocols guide operators through the correct test sequence for different equipment types, ensuring consistency and reducing the risk of missed tests or incorrect procedures.

Core Testing Functions: Earth continuity testing at 200mA provides accurate protective conductor verification across equipment from hand tools through to industrial machinery. The Auto-start continuity function is particularly valuable when testing equipment with multiple exposed metal components – start the test, touch each point requiring verification, and the tester automatically progresses, significantly speeding up large equipment assessment.

Insulation resistance testing offers selectable voltages (50V, 100V, 250V, 500V) to safely test both robust industrial equipment and sensitive electronics without risk of damage. The lower 50V and 100V settings make the MI3340 particularly valuable for testing modern electronic devices, battery chargers, and EV-related equipment that older testers with only 250V/500V capability can damage.

Leakage current testing encompasses protective conductor current, touch current, and differential leakage measurements in both direct and alternative modes. This comprehensive approach ensures accurate results across equipment types from simple hand tools through to complex devices with floating inputs or Class II construction.

Advanced Capabilities: Active polarity testing verifies equipment requiring mains voltage for operation – essential for testing residual current devices, smart extension leads, and EV charging cables that won’t function during conventional testing. This eliminates the frustration of “can’t test” situations that delay jobs and reduce profitability.

PRCD testing support covers all portable RCD types including 2-pole, 3-pole, K/Di (varistor), and S-type devices. Combined with full RCD testing (Types A, AC, B, B+, F), the MI3340 handles specialized equipment that basic PAT testers cannot adequately verify.

IC-CPD testing capability positions your business for the growing electric vehicle market. With compatible adapters (available separately), the MI3340 tests both Mode 2 and Mode 3 EV charging cables – an increasingly valuable service as workplaces and commercial facilities adopt electric vehicle charging infrastructure.

Socket testing functionality enables comprehensive power point verification, checking mains voltage, correct L/N/PE wiring, and identifying common installation faults. This troubleshooting capability adds value during site audits and helps identify infrastructure problems before they cause equipment failures or safety incidents.

Engineered for Australian Operating Conditions

Electrical testing across Australia means working in diverse environments – from air-conditioned offices through to dusty mining sites, coastal facilities, and tropical construction zones. The MI3340’s robust construction and sealed design handle exposure to dust, humidity, and temperature variations that would degrade lesser equipment.

The color touchscreen remains clearly readable in bright outdoor conditions while offering smartphone-familiar operation that reduces training time. Physical function buttons provide backup control when working with gloves or in environments where touchscreen operation isn’t practical.

Battery performance is specifically optimized for Australian operating patterns. A single charge supports a full day’s testing across typical commercial facility schedules (150-200 appliances), while rapid recharge capability means the tester isn’t sitting idle during lunch breaks or between morning/afternoon sites. The Li-ion chemistry maintains performance across Australia’s temperature extremes, from summer heat in northern regions through to winter conditions in southern states.

Professional Documentation and Data Management

The included Metrel ES Manager PRO software license (typically a separate $600+ value) provides comprehensive data management capabilities. Create custom test sequences for specific client requirements, generate professional PDF test reports with your branding, and maintain searchable databases of equipment testing history.

The PRO license unlocks advanced features including batch report generation, custom database structures for different clients, and export capabilities for integration with asset management systems. This professional capability sets you apart from competitors using entry-level software or paper-based systems.

The Android aMESM app (free download) extends functionality to smartphones and tablets, enabling barcode scanning for rapid equipment identification and test data upload to cloud storage. Site supervisors can access real-time testing progress, while office staff can generate invoices and reports without waiting for the technician to return.

What’s Included in the Complete Kit

MI3340 AlphaEE XA Tester:

• Main testing unit with integrated Li-ion battery
• 2m mains power cable (IEC C13/Type I Australian connector)
• 1.5m test lead (black, 2.5mm²)
• Test probe (black)
• Crocodile clip (black)
• USB cable (Type A/B for PC connection)

Zebra ZQ521 Bluetooth Printer:

• Wireless thermal transfer printer
• Integrated Li-ion battery with rapid charging
• Direct thermal technology (no ink or ribbons required)
• Starter roll of test tags included

Socket S740 Barcode Scanner:

• Pocket-sized Bluetooth 2D/QR scanner
• Rapid pairing with tester and mobile devices
• Rechargeable battery with extended runtime

Professional Carry Case:

• Heavy-duty construction with reinforced corners
• Custom-cut foam inserts for secure equipment storage
• Organized compartments for leads, tags, and accessories
• Weather-resistant exterior suitable for ute or van storage

Software and Documentation:

• Metrel ES Manager PRO software license (PC)
• aMESM Android app access
• Comprehensive instruction manual (English)
• Quick reference guide
• Factory calibration certificate

Note: This complete kit is assembled specifically for the Australian market and includes everything needed to commence professional PAT testing operations immediately.

The post Metrel MI3340 PAT Tester Kit | Complete Test & Tag Solution appeared first on rapid-tech.

The Growing Challenge of Power Quality in Modern Electrical Systems

Australia’s electrical infrastructure is undergoing rapid transformation. The proliferation of variable speed drives, LED lighting, solar inverters, EV charging stations, and data centre equipment has fundamentally changed the nature of electrical loads across commercial and industrial facilities.

These non-linear loads generate harmonic distortion, voltage fluctuations, and transient events that compromise equipment performance, increase energy costs, and create compliance headaches.

For Australian electrical contractors and facility managers, the consequences of poor power quality are increasingly severe: premature equipment failures, unexplained downtime, nuisance tripping, overheating transformers, and costly energy wastage. Yet identifying the root cause requires instrumentation that meets international standards while remaining practical for field deployment.

Traditional power quality analysers often struggle to balance the competing demands of certified accuracy, comprehensive data capture, and usable interfaces that don’t require a PhD to operate.

Introducing the Metrel MI-2992: Where Certified Accuracy Meets Intuitive Operation

The Metrel MI-2992 Power Quality Analyser represents a fundamental rethinking of what a professional PQA should deliver. Built on an Android-based platform, this instrument combines the certified measurement accuracy that power quality standards demand with the responsive, intuitive interface that modern trade professionals expect.

The expansive 10.1-inch colour touchscreen transforms complex power quality data into immediately actionable insights, whether you’re standing in a switchroom troubleshooting voltage sags or conducting a week-long EN 50160 compliance survey.

Full compliance with IEC 61000-4-30 Edition 3.0 Class A ensures your measurements meet the highest international accuracy standards, while the step-by-step setup wizard means even operators new to power quality analysis can configure professional-grade monitoring campaigns within minutes.

The instrument supports simultaneous capture of events, inrush currents, transients, RVCs, alarms, and signalling analysis, providing the comprehensive dataset needed to diagnose even the most complex power quality issues.

Key Benefits for Australian Electrical Professionals

• Class A Certified Accuracy You Can Defend: Every measurement meets IEC 61000-4-30 Class A requirements, the gold standard for power quality instrumentation. This isn’t a compromise instrument that approximates results—it’s a fully certified analyser that produces data suitable for contractual disputes, regulatory compliance, and professional engineering reports. When a client questions your findings or a network operator challenges your measurements, Class A certification provides the defensible accuracy that protects your professional reputation.
• Comprehensive Harmonics Analysis: The MI-2992 captures harmonic components up to the 63rd order, providing visibility into the full spectrum of harmonic distortion affecting modern electrical systems. But the instrument goes further, measuring supraharmonics in the 2.1 to 14.9 kHz range with 200 Hz resolution. This capability is increasingly critical as switching power supplies, LED drivers, and solar inverters generate high-frequency emissions that traditional analysers miss entirely.
• Flexible Recording for Every Application: Recording intervals span from 200 milliseconds for capturing fast transient events to 2 hours for long-term trend analysis, with user-selectable averaging options including avg, min, max, and avgon. Predefined recorder profiles for EN 50160, IEEE 519, Codigo de Red, and other international standards eliminate guesswork, while custom profiles allow tailoring to specific client requirements.
• True Portable Operation: The built-in Li-Ion battery ensures continued operation during power outages—essential when monitoring unstable supplies—while the wide-range power supply (85-500 VAC) allows direct connection to virtually any electrical system. At 2.5 kg with dimensions of 320 × 230 × 60 mm, the MI-2992 strikes the optimal balance between screen real estate and field portability.
• Future-Ready Connectivity: USB Type-C, Gigabit Ethernet, Wi-Fi 802.11 ac/a/b/g/n, and Bluetooth 4.2/BLE provide connectivity options for any environment. NTP time synchronisation ensures accurate event correlation across multiple instruments, while VNC remote access allows full instrument control from any networked computer—monitor your recording campaign from the comfort of your office or respond to alarm conditions without travelling to site.

Applications Across Australian Industries

• Commercial and Industrial Facilities: Investigate power quality issues affecting sensitive manufacturing equipment, identify harmonic sources contributing to transformer overheating, and document baseline power quality for contractual handover of new installations. The four-channel voltage and current measurement capability handles single-phase through to four-wire three-phase systems with full support for open delta and other configurations.
• Solar and Renewable Energy: Commission grid-connected solar installations with documented power quality verification, investigate inverter-related harmonic issues, and monitor long-term performance against network connection agreements. Direct support for 1500 VDC systems via the optional S 2149 attenuator addresses the growing market for high-voltage solar installations.
• Healthcare and Critical Facilities: Verify power quality in hospital IT systems and operating theatres where power disturbances can have life-safety implications. Monitor UPS performance and confirm switchover characteristics meet design specifications. Document power quality for AS/NZS 3003 medical electrical installation compliance.
• Network and Utility Applications: Conduct EN 50160 compliance surveys for network operators, investigate customer complaints about supply quality, and document power quality at connection points. GPS time synchronisation via optional accessory ensures measurements can be precisely correlated with network events.
• Variable Frequency Drive Systems: The VFD mode supporting 5 Hz to 120 Hz system frequencies addresses the specialised requirements of motor drive applications, enabling power quality analysis on the output of variable frequency drives where traditional analysers cannot operate.

The post Metrel MI-2992 Class A Power Quality Analyser | IEC 61000-4-30 appeared first on rapid-tech.

Metrel MI 3281 Winding Resistance Analyser – Precision Testing for Transformers

The Metrel MI 3281 Winding Resistance Analyser sets a new benchmark for efficiency and accuracy in transformer testing.

Designed for professionals in power distribution and industrial installations, this portable and feature-rich device ensures thorough, reliable assessments of transformer winding resistance. Its advanced capabilities and intuitive design streamline testing processes, making it an essential tool for technicians and engineers.

Key Features of the Metrel MI 3281

Portable Design for Field Applications

The compact and robust design of the MI 3281 is ideal for on-site testing. Its portable form factor ensures mobility, allowing users to easily transport and deploy the device in diverse environments, from industrial facilities to remote substations.

Compatibility with Single and Three-Phase Transformers

The MI 3281 is engineered to accommodate both single and three-phase transformers, making it a versatile solution for varied testing requirements.

This dual compatibility minimizes the need for multiple devices, optimizing both time and resources.

Selectable Test Current (10 mA to 20 A)

With a selectable test current range from 10 mA to an industry-leading 20 A, the MI 3281 empowers users to perform precise resistance measurements on a range of transformer types. This flexibility allows professionals to tailor their testing process to each specific application.

Automatic Tap Changer Test

The automatic tap changer test is a standout feature, enabling rapid and reliable testing without manual intervention. This functionality reduces the risk of errors while significantly improving operational efficiency, particularly in high-demand scenarios.

Demagnetization Function

The built-in demagnetization feature is crucial for ensuring transformer stability and operational reliability. It removes residual magnetism between tests, preserving equipment integrity and ensuring precise measurements.

Built-In Help Screens

For users requiring on-the-spot guidance, the built-in help screens provide step-by-step instructions and troubleshooting support. This user-centric feature reduces learning curves and enhances operational confidence, even for less experienced technicians.

Emergency Stop Switch

Safety is paramount in industrial environments, and the MI 3281 addresses this with a prominently placed emergency stop switch. This reliable feature ensures immediate shutdown in critical situations, reinforcing the device’s commitment to user safety.

Applications of the Metrel MI 3281

The Metrel MI 3281 excels in various scenarios, but it truly shines in power distribution and industrial applications. Its ability to handle both single and three-phase transformers makes it invaluable for routine maintenance, fault diagnosis, and compliance testing. The advanced auto sequences, including the tap changer test, simplify complex testing workflows, allowing teams to maintain high productivity and ensure reliable power delivery.

From verifying new installations to monitoring aging equipment, the MI 3281 enables comprehensive diagnostics, ensuring transformers operate efficiently and meet stringent regulatory standards.

Why Choose the Metrel MI 3281?

The Metrel MI 3281 is a trusted solution for professionals seeking precision, safety, and convenience in testing transformer winding resistance. Its advanced features like automatic tap changer testing, selectable high-current options, and built-in safeguards make it an exceptional choice for tackling the challenges of industrial and power distribution environments.

Whether you’re troubleshooting, upgrading transformer systems, or ensuring compliance, this analyser is designed to deliver fast and reliable results. Equip your team with the Metrel MI 3281 and experience enhanced operational efficiency and dependable performance when it matters most.

The post Metrel MI 3281 WR – Winding Resistance Analyser for Transformer Testing appeared first on rapid-tech.

The Metrel A 1732 DC EVSE Adapter is the ultimate solution for electrical safety and functional testing of Electric Vehicle Supply Equipment (EVSE). Designed for both Mode 4 (DC EVSE) and Mode 3 (AC EVSE) configurations, this specialized tool is perfect for EVSE commissioning, periodic safety inspections, and renewable energy car charging installations. It is a must-have for professionals in the e-mobility sector, delivering reliable results with cutting-edge features and compatibility.

Comprehensive Connector Compatibility

The A 1732 DC EVSE Adapter supports a wide variety of connector types, including CCS2, CHAdeMO, and Type 2 AC plugs. This ensures its versatility across different EVSE systems, making it suitable for a wide range of applications. Whether you are working with AC or DC charging stations, this adapter gets the job done with precision and efficiency.

Advanced Testing Capabilities

When paired with the MI 3155 EurotestXD installation tester, the A 1732 Adapter unlocks powerful testing functionalities:

• Communication Protocol Support: Compatible with ISO 15118, DIN 70121, CHAdeMO, and Low-level PWM protocols.
• Fault Simulation: Enables simulations such as CP open, PE open, CP short, or CAN stop to assess EVSE response.
• Accurate Measurements: Perform 4-wire measurements, DC impedance testing, insulation resistance measurements (up to 2500 V), and live monitoring of charge protocols.
• Remote Fault Triggering: Test reaction times and simulate real-world conditions with precision.

Key Features for Professionals

• Bluetooth Connectivity: Seamless communication with the MI 3155 EurotestXD for real-time data transfer.
• Predefined Test Protocols: Simplifies testing processes, saving time and effort in the field.
• Simulated EV Battery: Operates at 300 V and 5 A, ensuring accurate functional tests.
• PC Software Integration: Easily manage measurements and generate reports using Metrel ES Manager software.

Built for Durability and Precision

With an overvoltage category of CAT III / 300 V and robust design, the A 1732 DC EVSE Adapter is built to endure demanding testing environments. It includes banana test points for DC, AC, and PE terminals, along with double PE test terminals for enhanced accuracy.

Applications of the A 1732 DC EVSE Adapter

• EVSE Commissioning and Testing: Ideal for testing domestic and commercial EV charging stations.
• Periodic Safety Inspections: Conduct routine checks to ensure EVSE compliance and safety.
• e-Mobility Solutions: Supports construction, renewable energy applications, and car charging systems.

Why Choose the Metrel A 1732 DC EVSE Adapter?

The A 1732 Adapter is an innovative, all-in-one tool that simplifies and enhances the testing process for EVSE installations. Its advanced features, combined with compatibility across multiple communication protocols and charging connectors, make it the go-to choice for industry professionals.

Upgrade your EVSE testing capabilities today with the Metrel A 1732 DC EVSE Adapter – precision engineering for the future of e-mobility!

The post Metrel A 1732 DC EVSE Adapter – Professional EV Charger Testing Tool for Accurate and Reliable Safety Inspections appeared first on rapid-tech.

Introducing the Metrel MD 9070 Digital Multimeter, a state-of-the-art instrument that combines precision, reliability, and versatility to meet all your electrical measurement requirements.

With its advanced features and robust design, the MD 9070 is the perfect tool for electricians, maintenance professionals, and DIY enthusiasts. Let’s dive into the exceptional capabilities that make the MD 9070 a must-have for any electrical project.

Accurate Readings on Sinusoidal and Non-Sinusoidal Signals

The MD 9070 boasts True RMS technology, ensuring accurate readings on both sinusoidal and non-sinusoidal signals. This means you can confidently measure various types of electrical waveforms, making it ideal for applications in industrial, commercial, and residential settings.

VFD Feature for Precise Frequency Measurements

Equipped with the VFD (Variable Frequency Drive) feature, the MD 9070 can measure true values in accordance with frequency. This capability enables precise measurements in systems that rely on variable frequency drives, ensuring accurate readings even in complex electrical installations.

Auto-Ranging and Manual Ranging for Convenience

With the MD 9070, you have the flexibility to choose between auto-ranging and manual ranging modes. Auto-ranging automatically selects the appropriate range for your measurement, while manual ranging allows you to manually adjust the range based on your specific requirements. This versatility ensures ease of use and accurate results in any situation.

Relative Zero Mode for Comparative Analysis

The MD 9070 offers a unique relative zero mode, allowing you to compare the difference between signals or remove background noise for more accurate measurements. This feature is invaluable in troubleshooting electrical systems, helping you identify and isolate potential issues with enhanced precision.

MAX/MIN Recording and Data Hold Function

Recording maximum, minimum, and average values is a breeze with the MD 9070. This feature provides you with valuable data for analysis and diagnostics. Additionally, the data hold function freezes the display, allowing you to capture readings for later review and analysis, even in challenging work environments.

Comprehensive Safety Features for Peace of Mind

Safety is paramount when working with electrical systems. The MD 9070 is equipped with CAT IV / 600 V and CAT III / 1000 V overvoltage protection, ensuring your safety while working on high-voltage installations. This robust safety design provides peace of mind, allowing you to focus on the task at hand without compromising your well-being.

Backlight for Enhanced Visibility

Working in dimly lit environments is no longer a challenge with the MD 9070. The built-in backlight feature illuminates the display, ensuring excellent visibility even in low-light conditions. This enables you to work with ease, accuracy, and confidence, no matter the lighting conditions.

Applications: e-Mobility, Mobile Installations, Preventative Maintenance, Troubleshooting

The MD 9070 finds its application in a wide range of electrical tasks. For e-Mobility, it facilitates the first safety inspection of electrical vehicles according to UN ECE R100 standards. In mobile installations, such as vehicles with on-board generators or emergency response vehicles, the MD 9070 ensures the electrical systems are functioning optimally.

It is also a valuable tool for preventative maintenance tasks, including earth continuity and insulation testing, voltage measurements, and frequency measurements. Finally, during troubleshooting and field service, the MD 9070 assists in identifying and resolving installation issues promptly and efficiently.

Invest in the Metrel MD 9070 Digital Multimeter today and experience the precision, reliability, and convenience it brings to your electrical projects. Don’t compromise on accuracy and safety. Choose the MD 9070 for all your electrical measurement needs and take your work to the next level.

The post Metrel MD 9070 Digital Multimeter: Precision Electrical Measurements for Professionals appeared first on rapid-tech.

Introducing the Metrel MI 3114 PV Tester, the leading-edge solution for comprehensive testing of photovoltaic (PV) systems. This state-of-the-art device caters specifically to PV professionals looking for sophisticated functionality in testing up to 1500 V systems with a maximum short circuit current of 40A. Optimized for performance, the MI 3114 aligns with the IEC 62446-1 standard, ensuring precise and accurate measurements every time.

Robust Features to Enhance Your PV Testing

The MI 3114 PV Tester is designed with a plethora of features to simplify and expedite your testing procedures. Among its key capabilities are automatic Category 1 testing, real-time measurements, and conversion of results to Standard Test Conditions (STC). This instrument excels in PV-specific assessments, such as insulation resistance of PV strings, continuity of PE conductors, and polarity tests. The integrated wireless remote unit uniquely allows for the seamless monitoring of irradiation and cell temperature, adding a layer of convenience to your testing process.

Intuitive User Interface and Advanced Memory Management

Crafted for ease of use, the MI 3114 boasts a large, intuitive color touch screen display. From this interface, users can effortlessly conduct tests, store and review results, and even correct parameters post-measurement. The MI 3114 is equipped with a sophisticated memory organizer, enabling operations on individual or grouped measurements with exceptional ease. Its search functionality and PV modules database handler further enhance the user experience, enabling an efficient workflow from test preparation to report generation.

Industry Standards Compliance and Applications

The MI 3114 is meticulously designed to comply with a variety of industry standards, including IEC/EN 61557 for electrical safety in low voltage distribution systems and IEC/EN 61326-1 for EMC requirements. This compliance makes the MI 3114 an indispensable tool for applications in renewable energy sources, special locations, and specifically low voltage photovoltaic installations. Ensure the efficiency and safety of your PV systems with precise testing, from first inspection to periodic maintenance.

Applicability to Photovoltaic (PV) Module Testing

The Metrel MI 3114 PV Tester is indeed suitable for photovoltaic (PV) module testing. Engineered specifically for high-performance applications, this tester excels in measuring the essential parameters crucial for PV module evaluation. With its capability to conduct insulation resistance tests, check the continuity of protective earth (PE) conductors, and perform polarity tests, it proficiently covers all necessary aspects of PV module testing. Additionally, the device’s ability to convert results to Standard Test Conditions (STC) ensures that measurements are accurate and aligned with industry benchmarks. This makes the MI 3114 an ideal tool for professionals tasked with maintaining the quality and safety of PV installations.

Technical Specifications

Main Unit Specifications

• Dimensions: 310 x 130 x 250 mm
• Weight: 4.4 kg

Remote Unit Specifications

• Dimensions: 140 x 80 x 230 mm
• Weight: 1 kg

Seamless Integration with Metrel ES Manager

Experience enhanced productivity and precision with the Metrel ES Manager software, which integrates seamlessly with the MI 3114. This software allows you to prepare measurement structures, upload or download data, and delve into the PV modules database. Generate and customize professional reports that meet and exceed industry expectations.

Purchase the Metrel MI 3114 PV Tester Today

Upgrade your PV testing capabilities with the Metrel MI 3114 PV Tester, a tool that symbolizes reliability, accuracy, and ease of use. It is the perfect choice for professionals in the renewable energy sector committed to quality and safety. Whether you aim to conduct evaluations, troubleshooting, or generate reports, the MI 3114 promises performance that delivers results. Discover the future of PV testing—order now and elevate your efficiency and accuracy in photovoltaic assessment.

The post Metrel MI 3114 PV Tester – Premium 1500V Photovoltaic System Testing Equipment with Wireless Monitoring, Advanced Memory Management, and Metrel’s First 40A Model appeared first on rapid-tech.

Explore the cutting-edge capabilities of the Metrel MI 3211 TeraOhmHP 10 kV High Voltage Insulation Tester. This advanced, portable instrument is expertly designed for rigorous industrial environments, perfect for professionals in need of precise and reliable insulation resistance analysis. With a high power output and impressive IP65 protection rating, this tester is built to endure and excel in challenging conditions.

Unmatched Performance and Versatility

The Metrel MI 3211 TeraOhmHP offers a full spectrum of measuring functions. It seamlessly conducts insulation resistance measurements reaching up to 20 TΩ, ensuring thorough evaluations across diverse applications. Furthermore, it performs a variety of diagnostic tests, including PI, DAR, and DD, adding a layer of depth to your electrical testing processes. The instrument also supports step voltage and DC withstanding voltage tests up to 10 kV, making it ideal for comprehensive voltage assessments.

Robust Design and Safety

Safety and durability are at the forefront of the MI 3211’s design. It boasts a dual-case construction for enhanced protection and is rated CAT IV up to 600 V, suitable for use in circuits at a height of 3000 m. The inclusion of coded banana connectors with a locking feature ensures secure connections, reducing the risk of accidental disconnections. Additionally, its newly designed HV crocodile clips offer improved grip, enhancing overall safety during use.

User-Friendly Interface and Features

Engineered for ease of use, the MI 3211 features a touchscreen interface allowing for straightforward operation. This user-friendly device supports a range of additional functionalities, such as programmable timers and AUTO SEQUENCEs, to streamline the testing process. The high memory capacity with an 8 GB SD card ensures extensive data storage, while the accompanying PC software, MESM, facilitates easy downloading, analysis, and test report printing. Connectivity is simple with isolated RS-232 and USB ports, and Bluetooth interface, ensuring seamless integration into your workflow.

Wide Range of Applications

Whether you are testing power transformers, measuring transducers in distribution networks, or carrying out periodic production line tests, the MI 3211 TeraOhmHP is dependable for various industrial applications. It excels in the troubleshooting and analysis of all insulation issues, supporting high voltage generators and surge arrestors effortlessly.

Compliance with Standards

The Metrel MI 3211 TeraOhmHP adheres to stringent industry standards, ensuring reliable performance and safety. It conforms to relevant electromagnetic compatibility standards (EN 61326-1) and safety standards, including EN 61010-1, EN 61010-2-030, and EN 61010-2-034 for instruments, as well as EN 61010-031 for accessories.

With the Metrel MI 3211 TeraOhmHP 10 kV, experience excellence in high voltage testing, precision in measurement, and durability in design. It’s a versatile solution for professionals, merging advanced technology with intuitive operation to meet the highest standards of industrial electrical testing.

Key Features for Advanced Insulation Testing

• Impressive Measurement Range: Execute insulation resistance measurements up to a remarkable 20 TΩ, suitable for the most demanding testing scenarios.
• Superior Safety Standards: Rated up to CAT IV 600 V for operations at heights of up to 3000 m, ensuring safety in challenging environments.
• Durable Design: Boasts a robust dual-case construction for added durability in harsh conditions, coupled with an IP65 case rating for dust and water resistance.
• Enhanced Connectivity: Utilizes coded banana connectors with a secure locking feature and newly designed HV crocodile clips to ensure stable and safe connections.
• Powerful Battery and Adjustability: Equipped with a 4400 mAh Li-ion battery and adjustable test voltage settings from 50 V to 10 kV in 50 V and 100 V steps.
• Efficient Charging and Discharging: Offers a maximum short circuit/charge current of over 4 mA (mains supply) or 2.4 mA (battery supply), with charging and discharging rates optimized for capacitive loads.
• Extensive Data Storage: Comes with an 8 GB SD card, allowing for extensive data storage and easy retrieval of test results.
• Advanced Features: Incorporates burn or breakdown mode, programmable timers, and automatic discharge of the test object upon measurement completion.
• Innovative Detection and Protection: Detects live voltage over 30 V and offers high voltage breakdown detection, alongside efficient interference protection with high EM noise rejection capabilities.
• User-Friendly Software and Operation: Includes the MESM PC software for downloading and analyzing test results, featuring intuitive operation through programmable AUTO SEQUENCEs and graphical/numerical data presentations.
• Versatile Power Options: Supports both mains and rechargeable battery power supplies, ensuring flexibility in various settings.
• Superior Communication: Offers isolated RS-232 and USB communication ports, complemented by Bluetooth interface for streamlined data transfer and integration.
• Quality Accessories: Includes high-quality, shielded test leads designed for precise and reliable measurement, with the ability to average results over selected intervals for improved accuracy.

The post Metrel MI 3211 TeraOhmHP 10 kV High Voltage Insulation Tester – Precision Measurement, Robust Design, and Enhanced Connectivity for Industrial Applications appeared first on rapid-tech.

Unmatched Performance for High Voltage Insulation Testing

The Metrel MI 3215 TeraOhmHP 15 kV is the premier choice for professionals in need of a reliable and robust high voltage insulation tester. With its capability to handle DC test voltages of up to 15 kV, this instrument is engineered to meet the demands of high-stakes industrial environments. Whether you’re assessing insulation resistance in power transformers, cables, or rotating machinery, the MI 3215 TeraOhmHP offers precision and peace of mind.

Key Features

• High Power Measurement: Capable of performing insulation resistance measurements up to an astounding 35 TΩ, ensuring rigorous testing protocols are met.
• Safety First: Rated to CAT IV, this tester can withstand harsh environments and high voltage testing up to 1000 V to 3000 m, making it the safest choice for industrial applications.
• Intuitive Interface: The innovative touch-screen or key manipulation interface with an easy-to-use menu-driven LCD for seamless operation, allowing for a straightforward selection of advanced measurement techniques.
• Advanced Testing Capabilities: Equipped with features like step voltage tests, diagnostic tests (PI, DAR, DD), and a withstanding voltage test of up to 15 kV.
• Data Management: Supports 8 GB memory via an SD card for extensive data storage and analysis, compatible with PC software MESM for comprehensive test reporting.
• Battery Efficiency: Powered by a long-lasting 4400 mAh Li-ion battery, offering flexible operation through battery or mains supply.
• Durability and Protection: Featuring IP65-rated protection and a robust dual-case design for high immunity to radiated EM fields and unwanted environmental impacts.

Comprehensive Measurement and Safety

The Metrel MI 3215 TeraOhmHP not only measures voltage and frequency up to 999 V TRMS but also includes capacitance measurements, making it a versatile addition to your testing arsenal. Its live voltage detection feature above 30 V enhances user safety, while automatic discharge functions prevent any potential risks post-testing procedures.

Efficient Testing for Industrial Application

Designed for demanding applications, the MI 3215 TeraOhmHP excels in testing a wide range of equipment, from high voltage generators and surge arrestors to measuring transducers in distribution networks. Its portability, coupled with a new line of high voltage test leads and improved safety crocodile clips, makes it an invaluable tool for both on-site and factory environments.

Compliance and Reliability

Compliant with stringent safety standards such as EN 61010-1 and EN 61326-1, the MI 3215 TeraOhmHP is engineered for reliable performance without compromising safety. EN-certified accessories ensure compatibility and extend the instrument’s utility for professional use.

Contact Us

Explore the future of insulation testing with the Metrel MI 3215 TeraOhmHP 15 kV. Available now for immediate shipment. Contact us today to secure your unit and elevate your testing capabilities. Let us empower your operations with state-of-the-art technology specifically tailored for your business needs.

The post Metrel MI 3215 TeraOhmHP 15 kV High Voltage Insulation Tester – Reliable Precision Testing & Data Management Solution appeared first on rapid-tech.