LKS1000 V3T+ PRO Ultrasonic compressed air leak detector is a portable detection device that can use industrial applications such as compressed air leak detection, compressed process gases leak detection, Vacuum leak detection, steam trap or valve condition analysis, steam trap or valve condition analysis, high voltage capacitive default detection (corona, arcing, tracking…), tightness checking and seal integrity test (with ultrasonic emitter).

LEAKSHOOTER® LKS1000 compressed air leak detector has been created to display in real-time the fusion of images of the scene being scanned and the detected ultrasounds coming from a leak (ultrasound received = white or colored dynamic target).

The dynamic target will be changed to big or small (white) depending on the leak size (intensity of ultrasonic waves received around 40 kHz) and on the settled sensitivity (GAIN).

If you want to know the leak severity, You can use the K function button on the menu to see severity color (LEAKSCORE from 0 to 100 is made for a 1 meter distance detection).

The STRAPSHOOTER®+ software is a powerful software with 100% AUTO MODE dedicated to all kind of traps, thermostatic, thermodynamic, ball float and inverted bucket models.

With its dedicated software STRAPSHOOTER®+ and LEAKSHOOTER® V3+PRO measures temperature on the pipes in and out of the steam trap and gives you the automatic diagnosis result after ultrasonic measurements.

The post Compressed air leak detector | LEAKSHOOTER® LKS1000V3+ PRO (NEW V3T+PRO) appeared first on rapid-tech.

• Built-in magnets for attaching to steel paneling or to a tripod
• Visual and audible alarm for Low battery indication
• 2 x high/low power level (130-110 dB)
• 13 x Bi-ultrasonic emitter system 40 kHz for optimal results
• 3 YEARS warranty

An application using the Dome transmitter and the Leakshooter LKS1000v2 for motor vehicle manufacturers is checking for leaks around a windscreen. The Dome transmitter is placed inside the car and gives out a ultrasonic signal, (in the form of beep!, beep!, beep! )and the Leakshooter LKs 1000v2  with flexible wand is outside scanning around the perimeter checking for leaks.  The above can be used for tanks with bad welds, containers, etc,.

Synergys LKSDOME Ultrasonic generator Specifications:

• 13 emitters giving Omni-directional ultrasound emission
• High Power Output: 130 dB @ 40KHz
• Low Power Output:  100 dB @ 40KHz
• On/Off Control
• Built-in magnets for attaching to steel panelling or tripod
• Power Supply: 6 x AA alkaline batteries
• Battery Life:  25 hours of operation
• Dimensions: 190 x 100 x 60mm (max) & in leather case 220 x 120 x 80mm (max)
• Storm proof leather case to IP66, designed to protect if dropped
• Neck strap for hands-free use
• Weight: 475g

The post Synergys LKSDOME Ultrasonic generator appeared first on rapid-tech.

Also available is the
Synergys LeakShooter LKS1000-V3+ Ultrasonic Leak Detector
with inbuilt Thermal Imager and special Steam Trap Software.

Compressed air is a costly form of energy and 20 to 40 % of it is lost through leak. Systematically checking for and eliminating leaks can therefore bring considerable energy savings. With Synergys LEAKSHOOTER acoustic imager  it is extremely simple and easy to locate rapidly leaks because they are immediately visible on the screen while you’re hearing at them.

Each photo is numbered, dated and timed, and shows the dB RMS level of the leak with the level of the gain setting. The photos can be uploaded directly onto a PC via a USB cable (supplied).

It is still possible, whilst visually searching for a leak,  to listen to the hissing sound of the leak using the professional headphones supplied with the device. The leak detection becomes then extremely user-friendly since you see what you’re listening to.

Top reasons why the LEAKSHOOTER / LKS 1000

Is the ideal compressed air leaks detector

It is a very sensitive acoustic imager capable of detecting a leak of 0,1mm under 3 bars at 20 meters

Top reasons why the LeakShooter / LKS 1000 Is the ideal compressed air leaks detector

• Very sensitive acoustic imager, Detects a leak of 0,1mm under 3 bars at 20 meters
• High resolution 340*680 pixel colour camera
• Large 3,5″ LCD colour display
• Precise leak detection and location by mean of a dynamic target changing in size and colour from yellow to red according to leak severity
• Able to take a picture of the leak location, JPEG format, and transfer to the PC into the LEAKVIEWER report software. Each scene picture with date, time and number, dB RMS and Max values are continuously measured and displayed on a colour and digital bargraph.
• Able to listen simultaneously to the leak noise with high quality headphones
• Able to locate leaks even without headphones
• Adjustable gain from 50dB to 110 dB
• Adjustable frequency with electronic mixer from 34kHz to 46 KHz
• Lithium-ion rechargeable battery
• Six hours autonomy with full charge

The post Ultrasonic Leak Detector | Synergys LeakShooter LKS-1000V2+ (New V2T+) appeared first on rapid-tech.

STRAPSHOOTER® Steam Trap Software

STRAPSHOOTER® is the first automatic stream trap analyzer which uses an embedded infrared pyrometer to measure pipe temperature T° IN & T° OUT. Easy to use, the LeakShooter LKS1000-V3+ and STRAPSHOOTER® software require no setup time and is ready to use right out of the box. The STRAPSHOOTER® software will automatically diagnose your steam trap’s operating condition and allows you to see, hear, analyze and report your steam trap’s current state.

The LEAKSHOOTER® LKS1000-V3 is used like a camera.

When it comes near a leak, a dynamic yellow target appears on the large colour screen. The target turns red and shrinks as it approaches the source of the leak. A bar graph at the bottom of the screen accompanies and facilitates the search.

When the device is facing the leak, a cross appears in the centre of the target. It is then possible to photograph and save the precise location of the leak.

Each photo is numbered, dated and timed and shows the dB RMS level of the leak. The photos can be uploaded directly onto a PC via a USB cable (supplied), ready to be attached to inspection reports.

It is still possible, whilst visually searching for a leak, to use the traditional method of leak detection, listening for the hissing sound of the leak using the professional headphones also supplied, which can be plugged directly into the device.

Top reasons why the LEAKSHOOTER / LKS 1000 Is the ideal compressed air leaks detector

• Very sensitive ultrasonic detector. Detects a leak of 0,1mm under 3 bars at 20 meters
• High resolution 340*680 pixel colour camera
• Large 3,5″ LCD colour display
• The Leakshooter allows precise leak detection and location by mean of a dynamic target changing in size and colour from yellow to red according to leak severity
• Able to take a picture of the leak location, JPEG format, and transfer to the PC into the LEAKVIEWER report software. Each scene picture with date, time and number, dB RMS and Max values are continuously measured and displayed on a colour and digital bargraph.
• Able to listen simultaneously to the leak noise with high quality headphones
• Able to locate leaks even without headphones
• Adjustable gain from 50dB to 110 dB
• Adjustable frequency with electronic mixer from 34kHz to 46 KHz
• Lithium-ion rechargeable battery
• Six hours autonomy with full charge

LeakShooter V3+ is an alternative product to the Fluke ii900

Synergys LeakShooter LKS1000-V3 Specifications:

The post Ultrasonic Leak Detector | Synergys LeakShooter LKS1000-V3+ appeared first on rapid-tech.