The EQUITEST comes equipped with LED indications, delivering clear and concise measurement statuses. Its optimal functions include automatic and manual operating modes, an integrated WiFi connection for maximum convenience, and compatibility with the HTANALYSIS App. With a power supply measurement category, optical/USB serial port for PC connection, and a compact size (210 x 115 x 60mm (8 x 5 x 2in)), the EQUITEST is designed to offer a seamless user experience.

Additionally, the EQUITEST boasts a robust mechanical protection and an input protection fuse, ensuring longevity and durability even in challenging conditions. Opt for either a 110V ±10% or 230V ±10% mains voltage, depending on your specific needs. The EQUITEST connects to its master unit via the C2050 cable and to the mains for power supply, guaranteeing easy setup and usage.

Adhering to numerous guidelines including EMC: IEC/EN61326, IEC/EN60204-1, IEC/EN61010-1, IEC/EN61010-2-030, IEC/EN61326-1, IEC/EN61439-1, and IEC/EN61557-1, the EQUITEST ensures safety and compliance at every step.

Please check the user manual of your HT installation safety tester for compatibility with EQUITEST. Perfectly compatible with the EASYTEST Multifunction tester for electrical installation safety tests, EQUITEST is the ideal choice for professionals seeking precision and efficiency.

Opt for HT Italia EQUITEST Adaptor and experience the harmonious blend of innovation, safety, and practicality.

EQUITEST Features:

• Continuity of protective and equipotential conductors with current >10A AC and open-circuit voltage <24V AC
• LED indications displaying measurement status
• Recognition of Manual and Automatic operating modes
• Input protection fuse EQUITEST is available for mains voltages of either 110V ±10% or 230V ±10%

The post HT Italia EQUITEST Adaptor |- High Precision 10A Continuity Measurement Accessory with Integrated WiFi & HTANALYSIS App Compatibility appeared first on rapid-tech.

The instrument is provided with the innovative AUTO function: by selecting this function and only setting the value of RCD current, EASYTEST carries out tests of overall earth resistance, RCD tripping time and insulation resistance in a sequence. At the end of the test, the device shows all results with the indication of compliance or non-compliance with the standards with simple symbols OK or NOT OK.

The internal memory allows saving the measures and subsequently transfer them onto the PC through the optical/USB connection.

The post Multifunctional Meter for Safety Test on Installations | HT Instruments EASYTEST appeared first on rapid-tech.

The instrument is provided with the innovative AUTO function: by selecting this function and only setting the value of RCD current, COMBI519 carries out tests of overall earth resistance, RCD tripping time and insulation resistance in a sequence. At the end of the test, the device shows all results with the indication of compliance or non-compliance with the standards with simple symbols OK or NOT OK.

The internal memory allows saving the measures and subsequently transfer them onto the PC through the optical/USB connection.

The post Multifunctional Meter for Safety Test on Installations | HT Instruments COMBI519 appeared first on rapid-tech.

The post Multifunction Electrical Installation and EVSE Tester | HT Instruments COMBI521 appeared first on rapid-tech.

The GSC60 MEASURES:

›    Earth Resistance with 2- or 3-pole volt-ampere method in TT, TN and IT systems, non-trip earth loop impedance measurement, stackless earth ground resistance measurement  with T2100 (optional).

›    Soil Resistivity with 4 pole Wenner method.

›    RCD Testing type A, AC, B with test current up to 10A.**

›    Insulation Resistance measurement with test voltage up to 1000V.

›    Continuity measurement of protective conductors with test current up to 200mA.

›    Advanced Loop Testing of MCBs, fuses and cable sizing.

›    Measurement of phase sequence (SEQ).

›    Measurement and recording of environment parameters and leakage currents through external probes.

HT INSTRUMENTS GSC60 for the Analysis of Power Quality and Energy Consumption.

›    9 types of electrical systems: 1Φ-2wires, 1Φ-split phase, 3Φ-3 wires, 3Φ-Aron, 3Φ-Open Δ, 3Φ-Open Y, 3Φ-2 el. 1/2, 3Φ-4 wires Y, 3Φ-High Leg.

›    632 parameters can be recorded for over two months.

›    Real Time. Real-time display of all waveforms, harmonics, vector diagrams as well as summary function on phases for a quick reading of the most important parameters.

›    Voltage Anomalies. Detection of voltage anomalies with a resolution of 20ms.

›    Energy Saving. One click allows you to check all the electrical absorption of all the equipment connected to the main power supply and save on energy costs.

Live. Real Time Analysis.

Wi-Fi connection allows you to display wave forms, vector diagrams, harmonics and all electrical parameters for each phase on your tablet/smartphone/PC

GSC60 helps to dispel the myth that recording analysis is complex. App HTanalysis makes it simple and clear. Using ZOOM Functions you can display all the recorded quantities. JUMP Function displays harmonics in any recording step just by clicking on the quantity.

HT INSTRUMENTS GSC60 Functions:

The post HT INSTRUMENTS GSC60 Multifunction Electrical Analyzer appeared first on rapid-tech.

The special remote probe (optional) and the auto internal function are useful when performing sequential measurements of earth resistance. A contextual help, selectable by the user, is available for each meter range function. The model can also save each test result inside memory and can transfer saved data to a PC through an optical/USB interface with dedicated Windows software (purchased as an option). Each measurement is saved with all sub-results including test parameters with up to two ID locators (selectable by user on meter) in order to reach the exact point where the measurement was performed.

Its features include: continuity test with 200 mA range; insulation measurement ranges 50, 100, 250, 500, and 1000 VDC; trip out time of RCDs type AC (automatic and manual modes); trip out current of RCDs (automatic and manual modes); loop impedance P-P, P-N, P-PE; loop impedance P-P, P-N, P-PE with high-resolution 0.1 MΩ using the IMP57 optional accessory; protective short circuit current; contact voltage; global earth resistance without tripping RCDs; phase sequence indication; auto function – automatic sequence test of global earth resistance + RCD test + Insulation and leakage current.

HT Italia Combi 419 Functions:

The post HT Italia Combi 419 Multifunction Installation Tester – Discontinued appeared first on rapid-tech.

The special remote probe (optional) and the auto internal function are useful when performing sequential measurements of earth resistance. A contextual help, selectable by the user, is available for each meter range function. The model can also save each test result inside memory and can transfer saved data to a PC through an optical/USB interface with dedicated Windows software (purchased as an option). Each measurement is saved with all sub-results including test parameters with up to two ID locators (selectable by user on meter) in order to reach the exact point where the measurement was performed.

Its features include: continuity test with 200 mA range; insulation measurement ranges 50, 100, 250, 500, and 1000 VDC; trip out time of RCDs type AC (automatic and manual modes); trip out current of RCDs (automatic and manual modes); loop impedance P-P, P-N, P-PE; loop impedance P-P, P-N, P-PE with high-resolution 0.1 MΩ using the IMP57 optional accessory; protective short circuit current; contact voltage; global earth resistance without tripping RCDs; phase sequence indication; auto function – automatic sequence test of global earth resistance + RCD test + Insulation and leakage current.

HT Italia Combi 420 Features:

• Continuity test with 200mA
• Insulation with 50, 100, 250, 500, 1000VDC
• Trip out time of RCDs type AC, A Standard and Selective
• Trip out current of RCDs type AC, A Standard and Selective (up to 1A)
• Loop Impedance P-P, P-N, P-PE
• Loop Impedance with high accuracy (with IMP57 optional accessory)
• Prospective short circuit current
• Contact voltage
• Global Earth Resistance without RCD tripping
• Phase sequence indication
• AUTO function (Ra + RCDtest + Insulation) on plug
• AC TRMS voltage and current
• Active, Reactive, Apparent power and power factor on single phase system
• Harmonics voltage/current up the 49th and THD% on single phase system
• Environmental parameters measure (°C, °F, %RH, Lux, sound level)
• Measure with remote probe (PR400 optional accessory)
• Leakage current
• Data HOLD
• Contextual help at display
• Optical-USB interface with PC connection
• Internal memory

The post HT Italia Combi 420 Multifunction Installation Tester – Discontinued appeared first on rapid-tech.

The HT Italia Combi G2 comes equipped with an inbuilt Wi-Fi, allowing easy data transfer to iOS/Android device of your choice, and USB cable for PC. This way report printing can be done either on site, or from the comfort of your office.

The HT Italia Combi G2 comes with no shortage of accessories, like HT96U, that allows to measure the leakage current. Or IMP57, capable of carrying out high resolution (0.1mOhm) loop/line impedance measurements with prospective short-circuit current calculation. So even when close to power stations, the user will be able to correctly size the protection devices in any system.

HT Italia Combi G2 Function:

• Continuity of protection conductors with 200mA
• Insulation resistance with 50, 100, 250, 500,1000V DC
• Type A, AC, and B general, selective, and delayed RCDs up to 1000mA
• Test on earth leakage relay RCDs (with RCDX10 optional accessory)
• Line/fault impedance with prospective short circuit current calculation
• High resolution line/fault impedance (with IMP57 optional accessory)
• Curve B, C, D, and K MCBs and type gG and aM fuses
• Selection of length, type, and insulation of the cable under test
• Selection of tripping time of the protection device under test
• Non-trip earth loop impedance
• Phase sequence indication
• Voltage drop on main power lines
• Power Analysis, Harmonic analysis up to 25th
• Leakage current by means of the external transducer HT96U (optional)
• Environmental parameters (C/F, HR%, Lux) by means of optional probes
• TFT display with touch-screen
• Help on-line
• Internal memory
• USB interface to connect to the PC
• Built-in WiFi interface to connect to iOS and Android devices
• Rechargeable NiMH batteries (external battery charger)

The post HT Italia Combi G2 Multifunction Installation Tester appeared first on rapid-tech.

This instrument performs:

continuity measurements with 200mA, Line/Loop impedance with high resolution (0.1mOhm – with IMP57 optional accessory), global earth resistance without RCDs tripping and phase sequence indication.

Each test can be saved inside the internal memory and downloaded to PC by using supplied Windows software.

HT Italia EquiTest 5071 Features:

• Continuity on protective conductors with 200mA
• Continuity on protective conductors with 10A and voltage <12V
• Continuity with 10A in compliance with IEC/EN60204-1:2006
• 4 wires measurement method
• Line/Loop impedance with calculation of the prospective short circuit current
• Line/Loop impedance with high resolution (with IMP57 optional accessory)
• Global earth resistance without RCDs tripping
• Contact voltage
• Phase rotation with 3 wires method
• Save results inside memory
• Recall measured test at display
• Optical/USB interface for PC communication
• Auto Power OFF
• Backlight

Standard Accessories:

• C2033X : Cable 3 wires with Shuko plug
• UNIVERSALKIT : Set 3 cables + 3 alligator clips + 1 test lead
• C5700 : Power cord for test 10A
• C7000 : Set of cables for 10A test, lenght 3m
• BORSA2051 : Soft carrying bag
• TOPVIEW2006 : Windows software + optical/USB cable C2006
• ISO9000 calibration certificate
• User manual on CD-ROM
• Quick reference guide

Optional Accessories:

• C7000/05 : Set cables for 10A test, 5m length
• C7000/10 : Set cables for test 10A, 10m length
• IMP57 : Accessory for high resolution Loop/Line Impedance
• CN0050 : Set of straps for use of meter on neck
• 1066-IECN : Connector for banana cables, black colour

The post HT Italia EquiTest 5071 Multifunction installation tester for continuity of earth conductor with 10A and Line/Loop impedance. appeared first on rapid-tech.

The MACROTEST G1 installation tester allows saving all measures into an internal memory so transferring the saved data to a PC by means of USB (provided as standard) or built in Wi-Fi interfaces with an iOS and Android smartphones or tablets.The software supplied among standard accessories allows printing testing reports.The multifunction installation tester MACROTEST G1 has as Optional clamp T2100 permits to quickly check the resistance of earth probes without disconnection from earth system.

More than one earth
The Macrotest Series easily measures earth ground resistance (2 and 3 Point Method) and soil resistivity (4 Point Method) with an easy to understand graphical user interface and color touchscreen. The meter can store internally up to 999 measurements. The included software enables easy data transfer to a computer, tablet or phone via built-in Wi-Fi or USB connection where it can be archived or used to generate reports.In addition to volt ampere method other testing modes can be adopted as follows:

• Stackless earth ground resistance measurement with T2100 (optional)
  HT Macrotest Series adopts an innovative method for earth resistance measurement eliminating the worry of finding a place for auxiliary earth rods. Earth resistance measurement will be easier thanks to an algorithm HTEarth storing all measurements effected with clamp T2100 and calculating earth resistance value without disconnecting rods.
• Soil resistivity
  It measures soil resistivity ( ) with 4-pole Wenner method.

Power and Load Analysis

• Single Phase and Three Phase balanced systems
• Voltage,Current and frequency measurement
• Active power, reactive power and apparent power measurement
• Cosphi, power factor measurement
• THD% and Harmonics analysis up to 25 th

HT Italia Macrotest G1 Features:

• Earth resistance and soil resistivity with 2/3/4 pole method
• Stackless earth ground resistance (with T2100 optional accessory)
• Power Analysis, Harmonic analysis up to 25th
• Continuity of protection conductors with 200mA
• Built-in WiFi interface to connect to iOS and Android devices
• USB interface to connect to the PC
• Colour touch-screen display
• Help on-line
• Internal memory and Cloud Storage (trough iOS or Android device)
• Rechargeable NiMH batteries (external battery charger)

HT Italia MACROTEST G1 Specifications:

Functions	MACROTEST G1	MACROTEST G2
Insulation with 1000VDC test voltage
Insulation with 500VDC test voltage
Insulation with 250VDC test voltage
Insulation with 50, 100VDC test voltage
Continuity of earth conductors with 200mA
Earth resistance with 2-pole and 3-pole
Earth resistance with ring mode	**	**
Ground resistivity with 4-pole
Measurement of electrical parameters (V, A, W, VAR, VA, PF)	1	1
Harmonic analysis up to 25th order and THD% calculation	(25th)1	(25th)1
Help on line
Internal memory to save measures
Optical/USB port for PC connection
Built-in WiFi communication interface
Hard carrying case	Optional	Optional

Technical Specifications:
Continuity with 200mA
Measuring range		0,01Ω÷99.9Ω
Accuracy		±(5.0% reading + 3 digits)
Test current		> 200mA (R ≤ 2Ω)
Open circuit voltage		4V ≤ V0≤ 12V
Insulation resistance
Test voltage		50, 100, 250, 500, 1000VDC
Measuring range		0.01MΩ ÷ 99.9MΩ (50V) 0.01MΩ ÷ 199.9MΩ (100V) 0.01MΩ ÷ 499MΩ (250V) 0.01MΩ ÷ 999MΩ (500V) 0.01MΩ ÷ 1999MΩ (1000V)
Basic accuracy		±(2.0% reading + 2 digits)
Test current		> 1mA on 1kΩ x Vnom (50,100, 250, 1kV) > 2.2mA on 230kΩ @ 500V
Short circuit current		<6.0mA for each test voltage
Line/Loop Impedance (L-L, L-N, L-PE)
Measuring range		0.01Ω ÷ 199.9Ω
Resolution		0.01Ω min (0.1mΩ with optional accessory IMP57)
Accuracy		±(5.0% reading + 3 digits)
Test voltage		100÷265V (L-N) / 100÷460V (L-L), 50/60Hz
Maximum test current		5.81A (@265V); 10.10A (@457V)
Selectable MCB protections		curves B, C, D, K
Selectable fuse protections		type aM and gG
Insulating material (test I2t)		PVC, butyl rubber, EPR, XLPE
Earth resistance and ground resistivity
Measuring range R		0.01Ω ÷ 49.99kΩ
Measuring range		0.60Ωm÷3.14MΩm
Accuracy		±(5.0%reading + 3digits)
Test current		10mA, 77.5Hz
Open circuit voltage		<20Vrms
Measurement of environmental parameters (with optional probes)
Air temperature (°C/°F)		-20.0 ÷ 60.0 °C / -4.0 ÷ 140.0 °F
Relative humidity		0% ÷ 100%RH
Illuminance (Lux)		0.001lux ÷ 20klux
Accuracy		±(2.0% reading + 2 digits)

General Specifications
Power supply	6×1.2V rechargeable type AA NiMH or 6×1.5V type AA alkaline
Battery life	> 550 test (alKaline)
Display	320×240 resistive color LCD with touch screen
Memory	999 locations, 3 marker levels
PC interface	optical/USB and Wi-Fi (with optional accessory C2013)
Dimensions (L x D x H)	225 x 165 x 75 mm / 8.8 x 6.5 x 2.9 in
Weight (including batteries)	1.2 kg / 2.5 lb
Safety	IEC/EN61010-1, double insulation
Pollution degree	2
Mechanical protection	CAT III 240V, max 415V among inputs
Reference standards	IEC/EN61557-1-2-3-4-5-6-7
Working temperature	0°÷ 40°C / 32°÷104°F
Working humidity	<80%RH
Storage temp.	-10°÷ 60°C / 14°÷140°F
Storage humidity	<80%RH

The post HT Italia Macrotest G1 Multifunction Earth Tester appeared first on rapid-tech.