The Extech IR200 measures temperature from 89.6°F to 108.5°F (32.0°C to 42.5°C) without contact. Accurate to 0.5°F (0.3°C) with 0.1°F/°C resolution.

The Extech IR200 is FDA 501K (USA) certified.

Adjustable alarm alerts user visually and audibly when temperature exceeds programmed limit. Optimum measurement distance of 1.9 in. to 5.9-in. (5 to 15 cm). Move the Body/Surface function switch to the Surface position for non-contact surface temperature measurements from 32°F to 140°F (0.0°C to 60.0°C). Fast response (0.5 seconds).

Simply press the trigger and read temperature on the large backlit LCD display. Memory stores up to 32 readings for easy recall.

Note: This thermometer is intended for scanning or monitoring an individuals temperature. It is not a substitute for a clinical thermometer. Always use a clinical thermometer when high accuracy body temperature measurements are required.

IR Thermometers that detect elevated temperature will vary with various factors and should not be relied upon as the sole determinant of a person’s body temperature. Use of additional medical devices and/or healthcare professionals will be needed to properly diagnose the condition of persons in any health screening assessment to identify elevated body temperature for any person.

Extech IR200 Specifications

The post Extech IR200 Non-Contact InfraRed Thermometer appeared first on rapid-tech.

The EXTECH IR320 Dual Laser Infrared Thermometer is designed to tackle tough jobs indoors and out. The IR320 is designed for electrical contractors and plant maintenance technicians who face an array of temperature diagnostic challenges from overheating motors and pumps, to corroded electrical connections, failed steam traps, premature wear on processing equipment, as well as faulty HVAC and refrigeration systems.

The Extech IR320 survives falls off a ladder from heights up to nearly 10 feet (3m). With an ingress protection rating of IP65, the meter is dustproof and easily handles wet environments, from rainy outdoors to water-intensive manufacturing processes.

For improved accuracy, the IR320 features two laser pointers to visually show a 25mm measurement spot at the optimal 30.48cm distance. The 12:1 distance to spot ratio adds a layer of safety for technicians by permitting non-contact temperature readings at a safe distance from dangerous energized or moving equipment. To expand its testing versatility across a much wider range of plant and electrical equipment, Extech added a higher temperature range spanning to 650°C and adjustable emissivity for different surfaces.

To make it easier to scan equipment at job sites for trouble, maintenance professionals can set up high and low alarm thresholds to trigger when abnormal conditions are detected. The IR320’s innovative alert system flashes a bright blue LED for low temperature alarms and a red LED for high temperature alarms. The fast-responding thermometer and color-coded functionality allows a user to quickly scan electrical and plant components and focus on identifying anomalies without constantly evaluating specific temperature values on the display.

Other useful features include a bright backlight for easy viewing of the multifunction display, trigger lock for continuous measurements without trigger fatigue and a tripod mount for more extended, fixed location measurements (using the TR100 tripod available separately). Useful data features like data hold, minimum, maximum, average and differential values (T2-T1) yield added insights to identify trends or unusual conditions while conducting equipment inspections.

EXTECH IR320 Features:

• Measure non-contact temperature up to 1202°F/650°C
• High basic accuracy with adjustable emissivity
• 12:1 distance to spot (target) ratio
• Dual laser pointer identifies target area between the two points (~1″/25mm diameter of measured area)
• Programmable alarm with visual alert — LCD displays LO with Blue LED flashing when reading falls below Low alarm set point; LCD displays HI with Red LED flashing when reading exceeds High alarm set point
• Automatic Data Hold when trigger is released
• MAX/MIN/AVG/DIF functions
• Waterproof (IP65 rating) with 3m drop-proof protection
• Bright backlighting illuminates display for taking measurements at night or in areas with low background light levels
• Lock function for continuous temperature measurement without pressing the trigger
• Tripod mount (1/4″-20 UNC) for hands-free operation
• Auto power off
• Low battery indicator
• Complete with 9V battery and soft case

EXTECH IR320 Dual Laser IR Thermometer Specifications:

The post EXTECH IR320 Dual Laser Infrared Thermometer appeared first on rapid-tech.

The HD500 Psychrometer with Infrared Thermometer combines 3 in 1 with humidity meter, type K thermometer and 30:1 infrared thermometer functions.

The HD500 features a large triple LCD backlit display, built in USB port, minimum/maximum, data hold and auto power off functions.

Built-in InfraRed Thermometer for non-contact temperature measurement to 500°C. Includes a 3 year warranty, Windows compatible software with USB cable, Type K bead wire probe, carrying case and 9-volt battery.

The Extech HD500 is ideally suited for measuring humidity, dew point, wet bulb, and temperature (non-contact/IR, air and type K probe) in laboratories, cleanrooms & storage areas. The HD500’s rugged double molded housing ideal for use in harsh environments and it’s large triple digit backlit display is easy to read in low light areas. The built-in infrared thermometer provides non-contact temperature measurement with a 30:1 distance to spot (DS) ratio.

The HD500 accepts all K type mini-connection probes for contact temperature readings & with it’s  MIN/MAX function you can recall the highest and lowest readings.

The HD500 has a USB interface and comes with Windows® compatible software as standard.

 Extech HD500 Psychrometer with InfraRed Thermometer Specifications:

The post Extech HD500 Psychrometer with InfraRed Thermometer appeared first on rapid-tech.

2.2″ Colour TFT LCD and Built-in 640 x 480 Camera With a microSD card for capturing images (JPEG) and video (3GP) for viewing on your PC

This meter is capable of making non-contact (infrared) and contact (thermocouple) temperature measurements. The built-in camera offers still image and video capturing functionality for documenting measurement locations. The meter includes a micro SD card slot for offloading still images and video. The built-in laser pointer increases target accuracy while the backlit LCD and handy push-buttons combine for convenient, ergonomic operation. This meter is shipped fully tested and calibrated and, with proper use, will provide years of reliable service.

Features:

• Non-contact IR Temperature measurement from -58 to 3992°F (-50 to 2200°C) with 50:1 distance to target ratio
• Built-in VGA (640 x 480) Camera
• MicroSD card for capturing images (JPEG) and video (3GP) for viewing on your PC
• Dual laser indicates ideal measuring distance where the two laser points converge to a 1″ target spot
• Fast 150 millisecond response time, colour LED bargraph for viewing trends
• Type K Thermocouple input, USB interface
• Air Temperature and Relative Humidity measurement
• Adjustable emissivity increases measurement accuracy for different surfaces
• Adjustable High/Low set points with audible alarm alerts user when temperature exceeds the programmed set points
• MAX/MIN/AVG/DIF functions, Auto Power Off
• Complete with microSD card, general purpose Type K bead wire probe, USB cable, rechargeable 3.7V battery, and carrying case

The post EXTECH VIR50 Dual Laser Infrared Video Thermometer appeared first on rapid-tech.

The high temperature Extech 42545 infrared thermometer has a temperature range of -50 to 1000°C. Non-contact temperature measurements are available at the touch of a button with the Extech 42545 infrared thermometer. The built-in laser pointer increases target accuracy while the handy pushbuttons provide convenient, ergonomic operation. The Extech 42545 infrared thermometer features a fixed 0.95 emissivity, which covers 90% of surface applications.

Infrared Temperature Measurement – Technology Explained:

Infrared thermometers measure temperature from a distance by detecting the amount of thermal electromagnetic radiation emitted from the object being measured. This allows users to accurately measure surface temperatures in hazardous or hard-to-reach places, or other situations in which non-contact temperature measurement is desirable. Infrared thermometer technology is useful in a wide range of applications – including industrial, laboratory, food service, fire fighting, hobby, and home use.

While the technology is relatively simple, the myriad of names given to these devices can be confusing. “Laser Thermometers” makes reference to the laser that helps aim the thermometer. “IR Sensors” and “IR Thermometers” make use of a common abbreviation for “infrared”. “Non-Contact Thermometers” is descriptive of the device’s ability to measure temperature from a distance. “Radiation Pyrometers” is a scientific/technical term for these devices.

Specifications

The post EXTECH 42545 High Temperature IR Thermometer, 50:1 appeared first on rapid-tech.