PRESYS T-500PIR Infrared Calibrator

Mike — Tue, 21 Nov 2017 20:23:55 +0000

The PRESYS T-500PIR Infrared Calibrator generates temperature values in order to enable the calibration of infrared thermometers. The temperatures generated have high accuracy, in an area of uniform temperature and emissivity.

The PRESYS T-500PIR Infrared Calibrator also has input for thermocouples and resistance thermometers, as well as current meter function.

The T-500PIR generates temperature from ambient to 500 ºC.
Has input for thermocouples, RTDs and thermoswitches reading.
The use of external standard thermometer is not required*.
Carries out completely automatic calibrations with or without the use of a
Accuracy of up 0.4 ºC, stability of 0.2 °C and resolution of 0.01 ºC.
Documenting capabilities: communication with computer and ISOPLAN Calibration Software.
Portable and compact, has strap for easy

* For high performance calibration, it is possible to make use of an external sensor RTD read in the input of the calibrator, with adjustment of the Callendar-Van Dusen coefficients.

It has extensive programming capabilities, where the calibrator is programmed to generate pre-set temperature.

Compatible with automatic calibration and documenting software, with application of ISOPLAN software on PC / Windows platform, using the serial port for connection between the PC and the calibrator that communicate via RS-232 or RS-485. ISOPLAN software can register thermometers and factory instruments, generate work orders, produce and print calibration certificates and reports, that is, all the information of power is brought into the environment of calibrations.

T-500PIR has also many other features, such as:

The electric signal calibrator is independent from the blackbody target
Internal buzzer beeps when the temperature reaches the desired
Keypad that eases the operation and configuration of the
Vacuum Fluorescent Display to present big-size
Thermo-element reading scaled to ITS-90 or IPTS-68.
RTD reading configurable with Callendar-Van Dusen coefficients
Internal regulated 24Vdc power supply for 2-wire
Internal rechargeable battery and battery charger included in the electric signal calibrator.
Independent circuitry for over-temperature protection and

PRESYS T-500PIR Infrared Calibrator Specifications:

Operating Range	ambient to 500 °C
Power Supply	110 or 220 Vac, 50/60Hz
Target Size	80 mm
Resolution	± 0.01 °C
Accuracy (internal reference)	± (0.4 °C + 0.1% of reading)
(external reference)	± 0.2 ºC
Target Emissivity (e):	0.95 ± 0.01
Stability	± 0.2 °C
Electric Power	1000 W
Heating Time	35 minutes (50 ºC to 500 ºC)
Cooling Time	30 min (500 °C to 100 °C)
Units / temperature Scales	°C or °F / IPTS-68 or ITS-90, user selectable
Display	Graphic vacuum fluorescent with contrast adjustment
Target Uniformity	± 0.50 °C
Dimensions (HxWxD)	260 x 180 x 270 mm
Weight	5.2 kg
Warranty	One year

Input Ranges		Resolution	Accuracy	Notes
millivolt	-150 to 150 mV -500 to -150 mV 150 to 2450 mV	0.001 mV 0.01 mV 0.01 mV	± 0.01 % FS ± 0.02 % FS ± 0.02 % FS	R_input > 10 MW auto-range
mA	-5 to 24,5 mA	0.0001 mA	± 0.02 % FS	R_input < 160 W
Resistance	0 to 400 W 400 to 2500 W	0.01 W 0.01 W	± 0.01 % FS ± 0.03 % FS	excitation current 0.9mA
Pt-100	-200 to 850 ºC / -328 to 1562 ºF	0.01 ºC / 0.01 ºF	± 0.1 ºC / ± 0.2 ºF	IEC-60751
Pt-1000	-200 to 400 ºC / -328 to 752 ºF	0.1 ºC / 0.1 ºF	± 0.1 ºC / ± 0.2 ºF	IEC-60751
Cu-10	-200 to 260 ºC / -328 to 500 ºF	0.1 ºC / 0.1 ºF	± 2.0 ºC / ± 4.0 ºF	Minco 16-9
Ni-100	-60 to 250 ºC / -76 to 482 ºF	0.1 ºC / 0.1 ºF	± 0.2 ºC / ± 0.4 ºF	DIN-43760
TC-J	-210 to 1200 ºC / -346 to 2192 ºF	0.1 ºC / 0.1 ºF	± 0.2 ºC / ± 0.4 ºF	IEC-60584
TC-K	-270 to -150 ºC / -454 to -238 ºF -150 to 1370 ºC / -238 to 2498 ºF	0.1 ºC / 0.1 ºF 0.1 ºC / 0.1 ºF	± 0.5 ºC / ± 1.0 ºF ± 0.2 ºC / ± 0.4 ºF	IEC-60584
TC-T	-260 to -200 ºC / -436 to -328 ºF -200 to -75 ºC / -328 to -103 ºF -75 to 400 ºC / -103 to 752 ºF	0.1 ºC / 0.1 ºF 0.1 ºC / 0.1 ºF 0.1 ºC / 0.1 ºF	± 0.6 ºC / ± 1.2 ºF ± 0.4 ºC / ± 0.8 ºF ± 0.2 ºC / ± 0.4 ºF	IEC-60584
TC-E	-270 to -150 ºC / -454 to -238 ºF -150 to 1000 ºC / -238 to 1832 ºF	0.1 ºC / 0.1 ºF 0.1 ºC / 0.1 ºF	± 0.3 ºC / ± 0.6 ºF ± 0.1 ºC / ± 0.2 ºF	IEC-60584
TC-N	-260 to -200 ºC / -436 to -328 ºF -200 to -20 ºC / -328 to -4 ºF -20 to 1300 ºC / -4 to 2372 ºF	0.1 ºC / 0.1 ºF 0.1 ºC / 0.1 ºF 0.1 ºC / 0.1 ºF	± 1.0 ºC / ± 2.0 ºF ± 0.4 ºC / ± 0.8 ºF ± 0.2 ºC / ± 0.4 ºF	IEC-60584
TC-L	-200 to 900 ºC / -328 to 1652 ºF	0.1 ºC / 0.1 ºF	± 0.2 ºC / ± 0.4 ºF	DIN-43710

The post PRESYS T-500PIR Infrared Calibrator appeared first on rapid-tech.

PRESYS T-30NIR Infrared Calibrator

Mike — Tue, 21 Nov 2017 08:16:38 +0000

The PRESYS T-30NIR Infrared Calibrator is a high performance, rugged, portable calibrator for calibrating and verifying infrared thermometers.

New Feature !

And now using your cell phone or Android device with our Andromeda application, connected to the T-30NIR through Bluetooth, you can easily set-up the right compensated temperature of the T-30NIR black body following the Sakuma-Hattori equation.

If you need to calibrate an IR thermometer with a different emissivity, it will automatically set-up the right temperature of the black body source.

Features:

Generates temperatures from -30 °C to 150 °C.
Very practical to use, facilitates calibration.
It can be used with external reference thermometer.
Includes a front cover and a connection for dry air blowing on the target edges which prevents the ice formation.
Large target of 80 millimeters.
Ideal for the test and calibration of most infrared thermometers available in the industry.
High accuracy: 0.4 °C with internal sensor and 0.1°C with external sensor.
Excellent temperature uniformity on the whole target surface.
Emissivity of 0.95 ± 0.02 for a wave-length from 8 µm to 14 µm.
Quickly reaches the selected temperatures.
Temperature stability: 0.1 °C.
Configurable readings in °C or °F.

PRESYS T-30NIR-NEW Datasheet

The post PRESYS T-30NIR Infrared Calibrator appeared first on rapid-tech.