HVAC Tools Archives - rapid-tech https://rapid-tech.com.au/hvac-tools-fluke/ Test Equipment Supplier Mon, 23 Sep 2024 04:25:07 +0000 en-AU hourly 1 https://wordpress.org/?v=6.9.5 https://rapid-tech.com.au/wp-content/uploads/2023/11/cropped-Rapid-Tech-logo-blue-1-1-32x32.png HVAC Tools Archives - rapid-tech https://rapid-tech.com.au/hvac-tools-fluke/ 32 32 FLUKE 3000 FC HVAC System https://rapid-tech.com.au/fluke-3000-fc-hvac-system/ Sat, 18 Sep 2021 11:19:59 +0000 https://fluke-test.com.au/?post_type=product&p=1797

The Fluke 3000 FC HVAC System provides measurement of all common electrical parameters

Consists of:

The Fluke 3000 FC Series Wireless Multimeter with the Fluke Connect® app has all the essentials for convenient test and measurement troubleshooting:

  • AC and DC voltage measurements to 1000 V
  • AC and DC current with 0.01 mA resolution
  • Continuity, resistance, diode test, capacitance and frequency measurements
  • MIN/MAX recording
  • CAT III 1000 V, Cat IV 600 V; IP54

The Fluke a3000 FC Wireless AC Current Clamp Module has all the essentials for convenient test and measurement troubleshooting:

  • True-RMS AC clamp meter
  • Measure up to 400 AAC
  • Use as a standalone meter or as part of the system
  • Logging function for recording and saving up to 65,000 readings
  • Inrush function

With the Fluke t3000 FC Wireless K-Type Temperature Module you can:

  • Use as a standalone meter or as part of the system
  • Logging function for recording and saving up to 65,000 readings

 

    FLUKE 3000 FC Datasheet

The post FLUKE 3000 FC HVAC System appeared first on rapid-tech.

]]> Fluke 3000 FC HVAC System

The Fluke FC Wireless HVAC System lets you work on electrical panels faster, safer, easier with remote current and temperature modules

Connect your FC AC Wireless Current Clamp Module to your test point, and view the results up to 20 meters away on the FC Wireless Digital Multimeter. Plus, you can connect the t3000 FC Wireless K-Type wireless temperature module and view remote temperature measurements.

 

You’ll save time, with less run-around collecting multiple measurements. Use multiple modules for measurements on three-phase systems, as a stand-alone measurement tool or combine with other Fluke Connect™ modules as a system for multiple measurements.

From short distances, you can even view readings from modules through closed electrical panels. Plus no more writing down data as the Fluke Connect remote modules captures up to 65,000 sets of time stamped min/max/avg readings, using the optional PC adapter.

Fluke Connect wireless test tools also offer increased safety by letting you view readings in a separate location from the test point.

Now you can take readings on moving machinery, with only the measurement module in harm’s way.

 

Fluke 3000 FC HVAC System

Includes:

  • Fluke 3000 FC Series Wireless Multimeter
  • Fluke a3000 FC Wireless AC Current Clamp Module
  • Fluke t3000 Thermocouple Thermometer
  • TL175 Test Leads
  • AC175 Alligator Clips
  • 80PK-1 K-Type Bead Thermocouple
  • Magnetic hanging strap

The post FLUKE 3000 FC HVAC System appeared first on rapid-tech.

]]> Fluke 80PK-11 Type-K Flexible Cuff Thermocouple Temperature Probe https://rapid-tech.com.au/fluke-80pk-11-type-k-flexible-cuff-thermocouple-temperature-probe/ Sun, 30 May 2021 11:35:07 +0000 https://fluke-test.com.au/?post_type=product&p=1417

Fluke 80PK-11 Type-K Flexible Cuff Thermocouple Temperature Probe

Features:

    • Designed for hands free measurement of HVAC temperature measuring applications
    • Use multiple and leave in place for route based routine maintenance
    • Use with any temperature-measuring instrument designed to accept Type-K thermocouples

    Fluke 80pk-11 Instruction Sheet

 

The post Fluke 80PK-11 Type-K Flexible Cuff Thermocouple Temperature Probe appeared first on rapid-tech.

]]> The Fluke 80PK-11 Type-K Flexible Cuff Thermocouple Temperature Probe is designed for HVAC temperature measuring applications.

The 20 inch PVC cable terminates with a Type-K thermocouple inside a 19.5 inch nylon cuff. The 80PK-11 can be used with any temperature measuring instrument that is designed to accept Type-K thermocouples and has a miniature connector input.

The 80PK-11 is not suitable for liquid immersion but can work in humid to wet environments.

The post Fluke 80PK-11 Type-K Flexible Cuff Thermocouple Temperature Probe appeared first on rapid-tech.

]]> Fluke 80PK-8 Pipe Clamp Temperature Probe https://rapid-tech.com.au/fluke-80pk-8-pipe-clamp-temperature-probe/ Sun, 30 May 2021 10:38:25 +0000 https://fluke-test.com.au/?post_type=product&p=1410

Fluke 80PK-8 Pipe Clamp Temperature Probe

The 80PK-8 Type K Thermocouple Pipe Clamp Temperature Probe is designed to reliably measure the temperature of pipes ¼-inch (6 mm) to 1 3/8-inch (35 mm) in diameter, at temperatures between -29 °C and 149 °C

Features:

  • Durable ribbon sensor
  • Measurement range: -29 to 149 °C for pipe diameters from 6.4 to 34.9 mm
  • One year warranty

    Fluke 80PK-8 Instruction Sheet

The post Fluke 80PK-8 Pipe Clamp Temperature Probe appeared first on rapid-tech.

]]> The Fluke 80PK-8 Pipe Clamp Temperature Probe uses Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces.

The 80PK-8 Type K Thermocouple Pipe Clamp Temperature Probe is designed to reliably measure the temperature of pipes ¼-inch (6 mm) to 1 3/8-inch (35 mm) in diameter, at temperatures between -29 °C and 149 °C (-20 °F and 300 °F), while retaining a long service life.

The Fluke 80PK-8 is designed to be compatible with any temperature-measuring instrument that accepts miniature Type K thermocouples with cold reference junction compensation. The accuracy of the temperature-measurement is a factor of the combined accuracy of the temperature measuring instrument and the 80PK-8.

 

The post Fluke 80PK-8 Pipe Clamp Temperature Probe appeared first on rapid-tech.

]]> Fluke 80AK-A Thermocouple Adapter https://rapid-tech.com.au/fluke-80ak-a-thermocouple-adapter/ Sun, 30 May 2021 07:48:08 +0000 https://fluke-test.com.au/?post_type=product&p=1407

Fluke 80AK-A Thermocouple Adapter

Features

  • Adapts Type-K thermocouple mini-connector to dual shrouded banana plug inputs
  • Measurement range and accuracy: probe dependent
  • Suitable for low voltage applications (below 30 V AC, 60 V DC)
  • One year warranty

The post Fluke 80AK-A Thermocouple Adapter appeared first on rapid-tech.

]]> The Fluke 80AK-A Thermocouple Adapter is designed to adapt K type thermocouples mini-connector to dual shrouded banana plug inputs.

Additionally, it is ideal for low voltage applications below 30 V AC and 60 V DC.

Compatible with

  • Fluke 116 HVAC Digital Multimeter
  • Fluke 179 True RMS Digital Multimeter
  • Fluke 179 IMSK Industrial Multimeter Service Kit
  • Fluke 233 Remote Display Digital Multimeter
  • Fluke 233/A Remote Display Automotive Digital Multimeter Kit
  • Fluke 27 II Rugged Digital Multimeter
  • Fluke 28 II Rugged Digital Multimeter
  • Fluke 287 True RMS Electronics Logging Multimeter
  • Fluke 289 True RMS Data Logging Multimeter
  • Fluke 83V Average Responding Industrial Multimeter
  • Fluke 28 II Ex Intrinsically Safe True RMS Digital Multimeter

The post Fluke 80AK-A Thermocouple Adapter appeared first on rapid-tech.

]]> Fluke 80PK-10 Pipe Clamp Temperature Probe https://rapid-tech.com.au/fluke-80pk-10-pipe-clamp-temperature-probe/ Sun, 30 May 2021 07:19:53 +0000 https://fluke-test.com.au/?post_type=product&p=1400

Fluke 80PK-10 Pipe Clamp Temperature Probe

This type K, extra large thermocouple probe clamps securely to larger pipes for fast temperature and superheat measurement.

Features:

    • Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces
    • For pipe diameters: 32 mm to 64 mm 
    • Measurement range: -29 °C to 149 °C 
    • Measurements are repeatable to 0.56 °C (1 °F)
    • Durable ribbon sensor
    • 1 metre lead
    • One year warranty

    Fluke 80PK-10 Instruction Sheet

The post Fluke 80PK-10 Pipe Clamp Temperature Probe appeared first on rapid-tech.

]]> The Fluke 80PK-10 Pipe Clamp Temperature Probe is a K type thermocouple probe designed to reliably measure the temperature of pipes 1.25-inch (32 mm) to 2.5-inch (64 mm) in diameter, at temperatures between -29 °C and 149 °C (-20 °F and 300 °F), while retaining a long service life.

The post Fluke 80PK-10 Pipe Clamp Temperature Probe appeared first on rapid-tech.

]]> Fluke 80PK-24 SureGrip Air Temperature Probe https://rapid-tech.com.au/fluke-80pk-24-suregrip-air-temperature-probe/ Sun, 30 May 2021 00:25:18 +0000 https://fluke-test.com.au/?post_type=product&p=1394

Fluke 80PK-24 SureGrip Air Temperature Probe

The Fluke 80PK-24 SureGrip Air Temperature Probe is a K type thermocouple probe ideal for use in air and non-caustic gas measurements.

Additionally, this air temperature probe features a bead protected by perforated baffle.

Features:

    • Bead protected by perforated baffle
    • Measurement range: -40 to 816ºC
    • One year warranty

    Fluke 80PK-24 Instruction Sheet

The post Fluke 80PK-24 SureGrip Air Temperature Probe appeared first on rapid-tech.

]]> The Fluke 80PK-24 SureGrip Air Temperature Probe is designed for measuring the temperature of air or gases.

The measuring bead of the probe is protected by a perforated 304 Stainless Steel baffle to prevent accidental damage. The sheath material is 300 Stainless Steel.

The 1 metre cable is terminated with a Type K miniature thermocouple connector with 0.792-mm (.312-in) pin spacing. The 80PK-24 can be used with any temperature-measuring instrument that is designed to accept Type K thermocouples and has a miniature connector input.

Compatible with

  • Fluke 51 II Handheld Digital Probe Thermometer
  • Fluke 52 II Dual Probe Digital Thermometer
  • Fluke 53 II Temperature Logging Digital Thermometer
  • Fluke 54 II B Data Logging Thermometer with Dual Input
  • Fluke 787 ProcessMeter Digital Multimeter (with 80AK)
  • Fluke 179 True RMS Digital Multimeter (with 80AK)
  • Fluke 568 Contact and Infrared Temperature Gun
  • Fluke 568 Ex Intrinsically Safe Mini Infrared Thermometer

The post Fluke 80PK-24 SureGrip Air Temperature Probe appeared first on rapid-tech.

]]> Fluke 80BK-A Integrated DMM Temperature Probe https://rapid-tech.com.au/fluke-80bk-a-integrated-dmm-temperature-probe/ Sat, 29 May 2021 08:34:57 +0000 https://fluke-test.com.au/?post_type=product&p=1392

Fluke 80BK-A Integrated DMM Temperature Probe

Features

  • Type-K thermocouple with standard shrouded banana jack
  • Convenient one piece construction
  • Compatible with DMMs with temperature measurement functions
  • Measurement range: -40 to 260ºC
  • Accuracy: +/- 2.2 °C or 2% whichever is greater ((0 to 260 °C)
  • 1 metre lead
  • One year warranty

 

The post Fluke 80BK-A Integrated DMM Temperature Probe appeared first on rapid-tech.

]]> The Fluke 80BK-A Integrated DMM Temperature Probe is a K type thermocouple with a standard shrouded banana jack that is compatible with digital multimeters that feature temperature measurement functions.

Additionally, this integrated digital multimeter temperature probe comes in a convenient one-piece construction.

Compatible with

  • Fluke 179 IMSK Industrial Multimeter Service Kit
  • Fluke 179 True RMS Digital Multimeter
  • Fluke 287 True RMS Electronics Logging Multimeter
  • Fluke 289 True RMS Data Logging Multimeter
  • Fluke 28 II Ex Intrinsically Safe True RMS Digital Multimeter

Specification

Measurement Range -40 to 260°C
Accuracy ±2.2°C or 2%, whichever is greater
Lead 1 metre

The post Fluke 80BK-A Integrated DMM Temperature Probe appeared first on rapid-tech.

]]> Fluke 80PK-26 SureGrip Tapered Temperature Probe https://rapid-tech.com.au/fluke-80pk-26-suregrip-tapered-temperature-probe/ Sat, 29 May 2021 03:53:55 +0000 https://fluke-test.com.au/?post_type=product&p=1385

Fluke 80PK-26 SureGrip Tapered Temperature Probe

The Fluke 80PK-26 features a tapered tip, making this tapered temperature probe ideal for use in air, non-caustic gas, and surface applications.

It is essentially a bead probe (80PK-1) with a handle.

    • Measurement range: -40 to 816ºC
    • One year warranty

    Fluke 80PK-26 Instruction Sheet

The post Fluke 80PK-26 SureGrip Tapered Temperature Probe appeared first on rapid-tech.

]]> Fluke 80PK-26 SureGrip Tapered Temperature Probe

The Fluke 80PK-26 SureGrip Tapered Temperature Probe is essentially a bead probe with a handle that can be used as a surface probe for measurements in the range of -40 to 816ºC

The stainless steel sheath allows the bead to measure temperatures higher than bead probes with flexible leads. The handle also allows you to apply more focused surface pressure without having your hand in close proximity to the source.

The 1-metre cable is terminated with a Type K miniature thermocouple connector with 0.792-mm (.312-in) pin spacing. The Fluke 80PK-26 can be used with any temperature-measuring instrument that is designed to accept Type K thermocouples and has miniature connector input.

Applications

    • Air
    • Non-caustic gas
    • Surface

Compatible with

    • Fluke 51 II Handheld Digital Probe Thermometer
    • Fluke 52 II Dual Probe Digital Thermometer
    • Fluke 53 II Temperature Logging Digital Thermometer
    • Fluke 54 II B Data Logging Thermometer with Dual Input
    • Fluke 787 ProcessMeter Digital Multimeter
    • Fluke 287 True-RMS Electronics Logging Multimeter
    • Fluke 289 True RMS Data Logging Multimeter
    • Fluke 83V Average Responding Industrial Multimeter
    • Fluke 572-2 High Temperature Infrared Thermometer
    • Fluke 568 Ex Intrinsically Safe Mini Infrared Thermometer
    • Fluke 80TK Module Thermocouple

The post Fluke 80PK-26 SureGrip Tapered Temperature Probe appeared first on rapid-tech.

]]> Fluke 80PK-22 SureGrip Immersion Temperature Probe https://rapid-tech.com.au/fluke-80pk-22-suregrip-immersion-temperature-probe/ Fri, 28 May 2021 11:13:04 +0000 https://fluke-test.com.au/?post_type=product&p=1382

Fluke 80PK-22 SureGrip Immersion Temperature Probe

The Fluke 80PK-22 SureGrip Immersion Temperature Probe is designed for use in liquids or gels. The probe can also be used as a general purpose temperature probe.

The 80PK-22 is not recommended for use in food or beverage preparation. Use the Fluke 80PK-25 for food preparation.

Features

  • Type-K thermocouple for use in liquids and gels
  • Measurement range: -40 to 1090 °C
  • One year warranty

    Fluke 80PK-22 Instruction Sheet

The post Fluke 80PK-22 SureGrip Immersion Temperature Probe appeared first on rapid-tech.

]]> Fluke 80PK-22 SureGrip Immersion Temperature Probe

Fluke 80PK-22 SureGrip Immersion Temperature Probe is designed for use in liquid and gels. It can also be used as a general purpose temperature probe.

The thermocouple junction is protected from tip to handle by an Inconel sheath. The 40-inch (1 meter) cable is terminated with a Type K miniature thermocouple connector with 0.792-mm (0.312-in) pin spacing. The 80PK-22 can be used with any temperature measuring instrument that is designed to accept Type K thermocouples and has a miniature connector input.

The 80PK-22 thermocouple junction is protected from tip to handle by an Inconel sheath.

 

The post Fluke 80PK-22 SureGrip Immersion Temperature Probe appeared first on rapid-tech.

]]> Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe https://rapid-tech.com.au/fluke-80pk-27-suregrip-industrial-surface-temperature-probe/ Fri, 28 May 2021 10:48:05 +0000 https://fluke-test.com.au/?post_type=product&p=1378

Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe

The Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe is designed for reliably measuring temperatures to 600 °C on flat or slightly convex surfaces, while retaining a long service life.

Features:

    • Durable ribbon sensor
    • Measurement range: -127 to 600 °C
    • One year warranty

    Fluke 80PK-27 Instruction Sheet

The post Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe appeared first on rapid-tech.

]]> Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe

The Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe is designed for measurement of -127 to 600 °C and is compatible with any temperature measuring instrument that accepts Type K thermocouples and has a miniature thermocouple connector.

Fluke 80PK-27 Sensor

The innovative SureGrip design makes it easier to hold the probe and focus on the measurement. Ideal for surfaces in rugged environments.

The post Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe appeared first on rapid-tech.

]]>