With an ergonomic and drop-tested design, the FLIR VP52-2 is the right choice for professionals performing field troubleshooting and verification of electrical installations within residential, commercial, and industrial buildings.

The FLIR VP52-2 Non-Contact Voltage Detector detects the presence of AC voltage at electrical outlets, junction strips, electrical circuits, and other devices without having to contact the device physically.  The VP52-2 has a minimum excitation voltage of 190 V AC (this is its normal, or low sensitivity, mode) and a high sensitivity mode allowing detection down to 24 V AC. Tactile vibration, audible beeper, and visual cues alert the user when AC voltage is present.

FLIR VP52-2 Features:

• Beeper sound
• Vibration feedback alarms
• Optimized High/Low sensitivity ranges
• Multi-color LED alarm indicators
• Bright flashlight
• Dual LED illuminator at probe tip
• ON/OFF button with auto power off (APO)
• CAT IV 1000 V safety rated
• Low battery indication (status LED flashing amber)
• Robust pocket clip
• Limited Three-Year Warranty
• 3 metre drop-tested

Description

1. AC Voltage sensor
2. Tip lighting
3. Alarm indicator
4. Status indicator
5. Power button: ON (short press); OFF (long press); Low/high sensitivity toggle (short press with meter ON)
6. Pocket clip
7. Flashlight ON/OFF button (long press)
8. Battery compartment access cap
9. Flashlight

The post FLIR VP52-2 Non-Contact Voltage Detector with Triple Alarm – CAT IV appeared first on rapid-tech.

The Flir VP42  is east to use and avoids touching live wires with NCV (Non-Contact) technology, and reduce risk of dropping the VP42 with it’s double moulded slip-resistant grip and an anti-roll case.  The Flir VP42 has a bright inbuilt flashlight, auto power off, and low-battery indication.

• Execute tasks efficiently with the bright flashlight and tip light to see target area
• Eliminate interruption from a dead battery with the low-battery indication featur
• Maximize battery life with the ‘auto power off’feature
• Detect voltage in electrical systems in large industrial facilities and residential low-voltage installations
• Never miss voltage presence with the tactile vibration and LED alarms – even in dark or noisy areas
• Durable to withstand a 3 metre drop
• Work safely with the CAT IV category safety rating

FLIR VP42 Non-Contact Voltage Detector Specifications:

The post FLIR VP42 Non-Contact Voltage Detector + Flashlight appeared first on rapid-tech.

The FLIR  VT8 Volt-Continuity-Amp electrical tester with it’s optimized Jaw design allows it to fit into tight spaces while at the same time measuring large diameter cables. Compact design and extensive measurement features makes the VT8 your ‘go to’ meter; carry it in your pocket and be ready to troubleshoot a wide range of systems and problems in your facility.

Two models to choose from, the VT8-600 has a CAT III-600V/ CAT IV-300V safety rating and the VT8-1000V is CAT III-1000V/ CAT IV600V rated.

The VT8-600/1000 is the right choice for electricians and service techs performing troubleshooting and verification of electrical installations and systems within commercial and light/industrial facilities.

RUGGED AND SAFE
Made with the quality and reliability you have come to expect from FLIR test and measurement tools

• Work more safely with the CAT IV safety ratings
• Safely store test leads when not in use with the built-in test lead holder
• Keep the test leads out of your way when you’re not using them – the length is short enough to minimize interference, yet long enough to get the job done.

RICH FEATURES
Equipped with the capabilities you need including True RMS, AC/DC voltage and current, continuity, resistance, and capacitance

• Measure AC/DC voltage and current, continuity, resistance, and capacitance
• DCA zero, relative mode (AC/DC voltage, AC current, and capacitance), data hold
• Work efficiently in dimly lit areas using the bright LED worklight and backlit display
• Uses standard Shielded Banana Test Leads
• Detect live AC voltages with the built-in non-contact voltage (NCV) detector
• Improve accuracy of readings with True RMS measurements
• The VT8-600 has a CAT III-600 V/CAT IV-300 V safety rating and a 100A/600V measuring range.
• The VT8-1000 has a CAT III-1000 V/CAT IV-600 V safety rating and a 200A/1000V measuring range.

FLEXIBLE, EASY TO USE
Designed for long, trouble-free operation so you can focus on the task at hand

• Take measurements in tight spaces with the optimized jaw design, and measure large-diameter cables with the wide jaw opening
• Operate the meter with one hand thanks to the compact, ergonomic design
• View information easily at any distance on the large multi-function LCD display

FLIR VT8-600 & FLIR VT8-1000 Specifications:

The post FLIR VT8 Voltage-Current-Continuity Open Jaw Tester appeared first on rapid-tech.

FLIR VP50 Non-Contact Voltage Detector Feature:

Enhanced Detection:

The FLIR VP50 Non-Contact Voltage Detector uses a low-profile probe tip that gets the sensor closer to electrical sources and enhanced sensitivity to help detect voltage in the latest safety outlets.

Powerful Worklights:

Intense (60-lumen) LED light source illuminates dimly lit locations – dual-LED convenience light at the probe tip lights up inspection targets.

Tactile Alarms:

Multi-color flashing LEDs and vibration alarms make it harder to miss the presence of voltage (up to 1000V) in noisy environments.

High/Low Sensitivity:

Detect voltage in electrical systems in large industrial facilities, residential low voltage installations, and systems located behind obstructions (using High Sensitivity mode).

Rugged & Durable:

Robust battery door and pocket clip design is engineered for long product life cycles, and the low profile detection tip bolsters a common weak point.

Technical Summary

Voltage Ranges 90 to 1000V
24 to 1000V
Category Rating CAT IV-1000V
Frequency Range 45 – 65Hz
Drop Test 3m (9.8’)
Built-in Flashlight Yes
Vibrating Indication Yes
On/Off Switch Yes
Warranty Limited Lifetime*

The post FLIR VP50 Non-Contact Voltage Detector + Worklight appeared first on rapid-tech.

The FLIR IM75 is both an advanced multifunction digital multimeter and premier handheld insulation tester for installation, troubleshooting and maintenance professionals. The IM75 includes several specialty insulation modes including: Polarization Index, Dielectric Absorption and Earth Bond Resistance. Insulation tests can be performed instantly, continuously and over a timed duration for in-depth assessment.

Next Generation Combo Insulation Tester & Multimeter Tackles Every Challenge Improve Best Practices for Insulation Testing

By adding insulation testing capabilities to the ubiquitous digital multimeter, electricians are always equipped for insulation testing, making it a more routine part of their predictive maintenance routine. The FLIR IM75 helps you do faster troubleshooting and repairs without the need for additional tools.

For Insulation Resistance Testing:

The combination meter is rugged: 2 meter drop-tested and IP-54-rated. It includes a digital insulation resistance tester (or megohmmeter) with 5 different test voltages (50V, 100V, 250V, 500V, 1000V) for measuring resistance (or ‘megging’) from 4MΩ to 20 GΩ with a resolution as low as 0.001MΩ and accuracy down to ±1.5%.

To make at-a-glance go or no-go testing easier, a 2-color LED indicator with Compare Mode makes pass/fail determinations easy to perform and easy to notice with a green/red Pass/Fail LED indicator on the face of the meter. The IM75 features several test modes not typically found in compact, handheld insulation testers including: Polarization Index, Dielectric Absorption and Earth Bond Resistance.

The IM75 allows users to add a variety of insulation tests to routine diagnostics performed either instantly, continuously or over a timed duration for in-depth assessment.

DMM Always Ready:

This full-function, True RMS 1000V-range digital multimeter measures AC and DC voltage, capacitance, frequency (ACV), and has VFD mode, diode-test, and continuity check capabilities. Designed rugged to handle daily use, the FLIR IM75 digital multimeter offers both safety and versatility—without compromising high performance.

VFD Mode: The FLIR IM75 is engineered to deliver accurate readings and diagnostics, no matter the environmental conditions. In industrial environments where motors, pumps and other processing equipment are controlled by switching electronics and variable frequency drives (VFDs), it can be difficult to test accurately when distorted waveforms exist on electronic loads. The IM75’s VFD Mode uses a low-pass filter to ensure precision readings even when signals are noisy.

Data Recording and Bluetooth Connectivity: When extended testing is required for trending and analysis, up to 99 readings can be recorded in the IM75’s internal memory. For extended data monitoring and remote viewing, the FLIR IM75 connects via Bluetooth to compatible smartphones and tablets using the FLIR Tools Mobile app.

Now, you can monitor electrical readings on equipment in closed cabinets, with dangerous moving components, or with extreme temperatures – all from a safe distance. Use the app to share diagnostic results with colleagues or customers on-site or remotely—share as primary readings or within professional-looking reports that are easily created. As part of the FLIR family, this innovative meter also communicates with METERLiNK-enabled FLIR IR cameras, helping you record electrical readings on thermal images in real time. Whether you’re working on complex electrical, mechanical or pump systems, you want tools that can work together to gather and record all the relevant data—temperature and electrical together on one thermal image. This not only means you save time, it also ensures accurate, coordinated documentation for PdM inspection reports.

The IM75 ’s super-bright LED worklights illuminate poorly-lit work areas without the use of a flashlight. These built-in flood-pattern lights free up a hand, adds confidence when performing visual inspections (for wear, pitting, dirt, corrosion and dust) and makes it easier to read faded labels and other markings, especially at unfamiliar job sites. The 4,000-count dual display with analog bargraph is LED-illuminated making it bright and easy to read anywhere. In addition to recording up to 99 manually entered readings, versatile data functions including auto and standard hold. For peace of mind, FLIR backs up its durable combo insulation tester / multimeters with a limited lifetime warranty.

Recommended Accessories

The FLIR TA50 Universal Magnetic Hanging Strap enables technicians to hang their FLIR test and measurement meters on metal electrical cabinets while testing.

The durable nylon strap on the FLIR TA50 securely fastens to test meters with an integrated mounting tab.

The FLIR TA10 Protective case is made from durable EVA rubber and is suitable for the Flir DM92 & DM93 Multimeters and the IM75 Multimeter/Insulation Tester.

It features form-fitting instrument compartments, a concealed zipper to resist dirt, resilient nylon strap and a rugged, non-slip finish.

The post FLIR IM75-2 Insulation & DMM Combo with Meterlink® appeared first on rapid-tech.