The Fluke FC Wireless HVAC System lets you work on electrical panels faster, safer, easier with remote current and temperature modules

Connect your FC AC Wireless Current Clamp Module to your test point, and view the results up to 20 meters away on the FC Wireless Digital Multimeter. Plus, you can connect the t3000 FC Wireless K-Type wireless temperature module and view remote temperature measurements.

 

You’ll save time, with less run-around collecting multiple measurements. Use multiple modules for measurements on three-phase systems, as a stand-alone measurement tool or combine with other Fluke Connect™ modules as a system for multiple measurements.

From short distances, you can even view readings from modules through closed electrical panels. Plus no more writing down data as the Fluke Connect remote modules captures up to 65,000 sets of time stamped min/max/avg readings, using the optional PC adapter.

Fluke Connect wireless test tools also offer increased safety by letting you view readings in a separate location from the test point.

Now you can take readings on moving machinery, with only the measurement module in harm’s way.

Fluke 3000 FC HVAC System

A complete automotive diagnostic package with everything you need in an automotive multimeter.

The Fluke 88V has improved measurement functions, troubleshooting features and accuracy to solve more problems on conventional and hybrid vehicles. The 88V is made in the U.S.A. and carries the industry leading lifetime warranty.

The Fluke 88V operates very similar to the classic Fluke 88, but with more problem solving power, safety, convenience and impact protection.

The 88V is independently tested to comply with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V/CAT III 1000 V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes.

Other features:

• Lifetime warranty
• 6000 counts, 3-3/4 digits
• Measure up to 1000 V AC and DC
• Measure up to 10 A, 20 A for up to 30 seconds
• Built in thermometer lets you carry one less tool (temperature probe included)
• Frequency to 200 kHz and % duty cycle
• Resistance, continuity
• RPM measurements with inductive pickup
• Millisecond pulse width measurements for fuel injectors
• Magnet hanger to attach meter to the vehicle and free your hands for other tasks
• 10,000 µF capacitance range for components and motor caps
• Min/Max-Average recording with Min/Max Alert to capture variations automatically
• Peak capture to record transients as fast as 250 µs
• Relative mode to remove test lead interference from low ohms measurements
• Auto and manual ranging for maximum flexibility
• Touch Hold to capture stable readings avoiding noisy signals
• Large display digits and two-level bright white backlight for increased visibility
• Analog bargraph for fast changing or unstable signals
• Input Alert provides audible warning against wrong use of input jacks
• Improved selectable sleep mode for long battery life
• Access door for fast battery changes without opening up the case
• “Classic” design with new removable holster with built in test lead and probe storage
• 10 meg ohm input impedance wont load circuits
• 0.1% DC accuracy

Position the meter in the most usable location with the magnetic hanger

The holster on the new Fluke 88V accepts a small but extremely powerful magnet (Fluke Tpak) that holds the meter firmly to most steel surfaces. This allows you to focus on taking measurements instead of holding the meter in your hand.

Electrical safety

All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges

The Fluke 376 FC True-RMS Clamp Meter combined with the insulated hand tools starter kit, the most often used screwdrivers, pliers and cutters.

Fluke 376 FC Clamp Meter

• 1000 A ac and dc current measurement, 2500 A ac current measurement with iFlex flexible current probe
• 1000 V ac and dc voltage measurement
• True-RMS voltage and current for accurate measurements on non-linear signals
• Log and trend measurements to pinpoint intermittent faults
• Transmit results wirelessly via Fluke Connect® Measurements app
• Create and send reports right from the field
• Stay safely away from the arc flash zone through Bluetooth connectivity to Apple and Android devices

Slotted screwdrivers

• Three different bladeforms
• Three handle lengths
• Phillips screwdrivers, #1 and #2 tips
• Two handle lengths

Long nose pliers with side cutter and gripping zones

• Unique milled wave pattern gripping zones
• 4 gripping points for pulling round objects with superior grip that won’t slip
• Straight, half-round, long and slim knurled jaws, specially profiled
• Side cutting edge for wire cutting

Heavy duty, high leverage diagonal cutter

• Cuts hard materials including steel and piano wire
• Power joint and precision cutting edges

Heavy Duty Combination Pliers

• Secure hold by aggressive serrated jaws and 4-point gripping hole
• Slim shape for better access to wires in tight spaces
• Powerful gripping jaw, yet 20% lighter weight than other designs

Fluke’s T6-1000 Electrical Tester with integrated FieldSense technology lets you quickly and easily take measurements by sliding the open fork over a conductor to see the voltage level without the need for test leads.*

The Fluke T6-1000 comes with the insulated hand tools starter kit, the most often used screwdrivers, pliers and cutters. Three sizes of slot screwdrivers. #1 and #2 Phillips screwdrivers. Long nose pliers, heavy duty diagonal cutters and heavy duty lineman combination pliers. All forged from hardened, German chromium-molybdenum-vanadium (CMV) steel. All certified to 1000 volts AC and 1500V DC. All with a limited lifetime warranty.

* Voltage measurement requires capacitive path to ground, provided through user in most applications. Ground connection via test lead may be required in some situations.

Fluke T6-1000 Electrical Tester

• Measure voltage to 1000 V ac through the open fork, without test leads
• No need to open covers or remove wire nuts
• Simultaneously measure voltage and current
• 17.8 mm open fork is widest in the industry; measure up to 200 A on 4/0 wires (120 mm2)
• Go beyond simple detection. Actually measure ac voltage and current values without test leads.

Slotted screwdrivers

• Three different bladeforms
• Three handle lengths

Phillips screwdrivers

• #1 and #2 tips
• Two handle lengths

Long nose pliers with side cutter and gripping zones

• Unique milled wave pattern gripping zones
• 4 gripping points for pulling round objects with superior grip that won’t slip
• Straight, half-round, long and slim knurled jaws, specially profiled
• Side cutting edge for wire cutting

Heavy duty, high leverage diagonal cutter

• Cuts hard materials including steel and piano wire
• Power joint and precision cutting edges

Heavy Duty Combination Pliers

• Secure hold by aggressive serrated jaws and 4-point gripping hole
• Slim shape for better access to wires in tight spaces
• Powerful gripping jaw, yet 20% lighter weight than other designs

The Fluke 87V Industrial Multimeter combined with the insulated hand tools starter kit, the most often used screwdrivers, pliers and cutters.

The 87V provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment even in loud, high energy, and high altitude locations. A low pass filter supports accurate frequency measurements on VFDs and captures intermittents as fast 250 µS.

The insulated hand tools starter kit has three sizes of slot screwdrivers. #1 and #2 Phillips screwdrivers. Long nose pliers, heavy duty diagonal cutters and heavy duty lineman combination pliers. All made from hardened chromium-molybdenum-vanadium (CMV) steel. All certified to 1000 volts AC and 1500V DC. All with a limited lifetime warranty.

Fluke 87V Industrial Multimeter

• Rugged, high accuracy industrial multimeter to measure current, voltage and frequency on complex variable frequency drive (VFD) signals
• Offers true-RMS AC voltage and current for measuring non-linear signals
• Captures intermittents as short as 250 µS
• Safety rated CAT III 1000 V, CAT IV 600 V
• Includes a built-in thermometer and temperature probe

Slotted screwdrivers

• Three different bladeforms
• Three handle lengths

Phillips screwdrivers

• #1 and #2 tips
• Two handle lengths

Long nose pliers with side cutter and gripping zones

• Unique milled wave pattern gripping zones
• 4 gripping points for pulling round objects with superior grip that won’t slip
• Straight, half-round, long and slim knurled jaws, specially profiled
• Side cutting edge for wire cutting

Heavy duty, high leverage diagonal cutter

• Cuts hard materials including steel and piano wire
• Power joint and precision cutting edges

Heavy Duty Combination Pliers

• Secure hold by aggressive serrated jaws and 4-point gripping hole
• Slim shape for better access to wires in tight spaces
• Powerful gripping jaw, yet 20% lighter weight than other designs

Ideal for electricians, this combo kit is built around the Fluke 87V, the most widely used industrial digital multimeter in the world and includes essential accessories to make you even more productive.

Assembled in the USA. Lifetime warranty.

The Fluke 87V/E2 Industrial Electrician Combo Kit is designed and assembled in the USA. The 87V multimeter is backed by a limited lifetime warranty, so you can rely on your DMM every time you take it out of your tool box.

Solve the difficult problems

Working on VSDs/VFDs: Take accurate voltage, current and frequency measurements on the output side of the drive at either the drive itself or at the motor terminals.

Industrial troubleshooting: Get the resolution and accuracy you need to solve more problems on motor drives, in-plant automation, power distribution, and electromechanical equipment.

Checking power quality: Capture glitches and spikes as short as 250 μs. Identify irregular signals.

Advanced measurement functions

• True-RMS ac measurements
• 0.05% dc accuracy
• 6,000 counts, 3-3/4 digit resolution, or 20,000 counts, 4-1/2 digit—resolution
• 10 A ac or dc (with test leads and current jacks) with 0.1 μA resolution
• Temperature measurements up to 1090 °C with included thermocouple probe
• Provides 10,000 µF capacitance range for components and motor caps
• Provides peak capture and Min/Max/Avg recording to capture intermittent as short as 250 µS
• Easy access door for fast battery changes without breaking the calibration seal
• Fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
• Presents a large digit display with bright, two-level backlight for easier reading in low light
• Includes an analogue bar graph for fast changing or unstable signals
• Auto and manual ranging for maximum flexibility
• Relative mode to calculate and display difference between two readings
• Holds readings on display for safe viewing after removing probes using Touch Hold technology

Electrical Safety

All inputs are protected to CAT IV 600 V, CAT III 1000 V.
They can withstand impulses in excess of 8.000 V and reduce risks related to surges and spikes.

This kit combines the Fluke 179 True-RMS DMM and the Fluke 323 True-RMS clamp meter. Both tools are rugged, reliable and accurate, as well as extremely easy to operate.

 Fluke 179 IMSK Includes:

Fluke 179 True-RMS Digital Multimeter

The Fluke 179 is the preferred solution for professional technicians around the world. It includes the features you need to troubleshoot and repair electrical and electronic systems:

• Delivers accurate True-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
• Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
• Includes a built-in thermometer to measure temperature without having to carry a separate instrument

Fluke 323 True-RMS Clamp Meter

The Fluke 323 clamp meter provides True-RMS measurements, optimized ergonomics, and large display for efficient troubleshooting. It’s designed to perform in the toughest environments and provide noise-free, reliable results, so you can confidently diagnose problems almost anywhere.

• Rugged, reliable basic True-RMS clamp meter for measuring current up to 400 A
• Measures AC current to 400 A
• Measures AC voltage and DC voltage to 600 V
• Provides True-RMS AC voltage and current for accurate measurements on non-linear signals
• Measures resistance to 4 kΩ with continuity detection
• Features a CAT III 600 V, CAT IV 300 V safety rating

Industrial electricians work in tough environments. That’s why the Fluke 179 True-RMS Digital Multimeter is combined with an industrial-strength test lead probe kit in a compact lightweight soft case.

Heavy-duty electrical service

The Fluke 179 True-RMS Digital Multimeter is the industry-standard troubleshooting tool for electrical and electronic systems. The included 80BK-A Integrated digital multimeter temperature probe eliminates the need to carry a separate thermometer.

You can hang your meter where it’s easy to see with the TPAK ToolPak™ Magnetic Meter Hanger, included in the kit. The C35 soft carry case that keeps everything ready to take with you includes three SureGrip™ accessories

• TL224 Insulated Test Leads
• AC280 Hook Clips
• TL910 Electronic Test Probes

The right measurement functions

The 179 is a True-RMS multimeter, providing accurate measurements up to:

• 1000 V AC/DC
• 10 A  AC/DC
• Resistance to 50 MΩ;
• Capacitance to 10,000 μF,
• Frequency to 100 kHz;
• Temperature from -40 °C to 400 °C (-40 °F to 752 °F).

The Fluke 179 offers both manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording. The large backlit digital display is easy to in dark areas and includes an analogue bar graph to view trending or unstable signals.

What’s included:

• Fluke 179 Multimeter
  • Installed 9V battery
  • 80BK-A Integrated DMM Temperature Probe
• AC280 SureGrip™ Hook Clips
• TL910 Electronic Test Probes
• TL224 SureGrip™ Insulated Test Leads
• TPAK ToolPak™ Magnetic Meter Hanger
• Soft carry case

Now compatible with Fluke Connect® Mobile App

Fluke’s 3000 FC Series Wireless Multimeter puts wireless test tools, not your body, near live electrical panels. Improve safety and efficiency with this tester.

All the facts, right in the field. The Fluke 3000 FC True-RMS Wireless Multimeter with the Fluke Connect app and ShareLive™ video call.

With its precision, reliability and ease of use, the Fluke 3000 FC Wireless Multimeter is the ideal solution for professional technicians. Independently tested for safe use in CAT IV 600V/ CAT III 1000 V environments, the Fluke 3000 FC has all the features you need to troubleshoot and repair many problems in electrical and electronic systems.

The Fluke 3000 FC gives you True-RMS voltage and current measurements, 6000-count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke 3000 FC provides higher 0.09% basic accuracy, a digital display showing up to three secondary measurements from remote modules, and a bright white backlight.

Work safely near electrical panels while wearing less PPE

The Fluke 3000 FC True-RMS Wireless Multimeter and Fluke Connect wireless test tools put tools, not your body, near live electrical panels. It’s simple. Just de-energize the cabinet, open the panel while wearing PPE and connect the remote modules, whether they are voltage modules, current clamps, flexible current loops or thermometers. Then read the results on the 3000 FC Wireless Multimeter from a safe distance. You can display the meter measurement, plus readings from up to 3 wireless modules, while reducing the risk of arc flash by separating yourself from hazardous measurement situations.

Better still, the Fluke 3000 FC Series Wireless Multimeter can send measurement data to your smartphone, so you can save and share measurements from the field with your team anytime, from anywhere.

Don’t get bogged down while chasing interrelated events

Timing is everything when trying to find the cause of a complex problem. Often you need to make a measurement in one place and see activity on a different part of the system at the same time. We’ve solved that problem with Fluke Connect – connect your remote modules in one location, then take your measurements up to 20 meters away with the Fluke 3000 FC multimeter. You’ll be able to see the interaction between your remote test points on one single screen, in real time. You can even download the data to a PC for further analysis.

Other capabilities of Fluke Connect and the 3000 FC Multimeter.

• Add your laptop and go from logging to analysis and diagnosis.
• Record over time using the Fluke Connect wireless modules and monitor circuit load changes for an hour, a shift or a week.
• Use the Fluke Connect wireless USB adapter to collect logged data from remote modules by walking past a working module and downloading logged data.
• Perform for analysis with your PC and share the results using Fluke Cloud™ storage and ShareLive™ video call. View data or graphs to get input from team members.
• To save you time, effort and energy, you can purchase the Fluke 3000FC True-RMS Digital Multimeter along with industrial-strength test lead sets plus a non-contact voltage detector – all in a sleek, durable carrying case.