There’s a particular kind of frustration that comes with knowing something’s wrong inside a system you can’t get eyes on. A gurgling drain that won’t clear with a standard snake. An engine that’s making a noise nobody can diagnose from the outside. A duct run that might be clogged with years of dust, or might not be — and the only way to find out used to mean cutting a hole, pulling a panel, or calling in a specialist just to have a look.

For electricians, mechanics, HVAC techs, and maintenance crews across Australia, that kind of guesswork costs time and money. Every unnecessary teardown is billable hours lost to a job that a five-minute camera inspection could have avoided. And when the fault genuinely is buried deep in a pipe, a bore, or a piece of machinery, the wrong tool means you’re back to square one — probe too thick to fit, cable too short to reach, image too dark or too blurry to actually tell you anything useful.

This is exactly the gap the Coantec M40 videoscope is built to close.

A Purpose-Built Tool for Confined-Space Inspection

The M40 is an industrial-grade videoscope — sometimes called a borescope or inspection camera — designed around a 6mm-diameter probe that’s slim enough to slip into narrow bores, pipework, and mechanical assemblies most standard cameras can’t reach. Rather than being a single fixed unit, the M40 uses a modular probe system, which is why it’s sold as a variable product across four cable lengths: 1.5m, 3m, 5m, and 10m. You choose the reach your job actually needs, without paying for cable length that’s just going to sit coiled on the bench.

At the core of every M40-60 series probe is a 2-megapixel (1920×1080) image sensor paired with 10–100mm short-focus optics and an 85° field of view — Coantec’s 6mm tube is also offered with a longer 15mm-to-infinity focus range and a wider 120° FOV, but the M40-6015/6030/6050/6100 SKUs are specifically the short-focus, 85° configuration, tuned for close-in work. That’s the kind of inspection where the probe tip is going to be sitting just centimetres from the surface you’re examining, whether that’s the inside wall of a pipe, a weld seam, or an internal engine component — and the 85° field of view means you’re not just seeing a pinhole of detail directly ahead, but enough context around the point of interest to orient yourself inside the cavity. A fixed LED at the probe tip lights the inspection point directly, so you’re not relying on ambient light inside a dark pipe or cavity.

All of that image data feeds back to a handheld unit built around a 5-inch HD touchscreen (800×480 resolution), so you’re reviewing footage on a proper screen in real time — not squinting at a phone held awkwardly next to a pipe opening. The controller supports 4× digital zoom during live inspection, with still images able to be zoomed up to 5× afterwards to check fine detail, plus 90°/180°/270° image flip. A built-in tracking cross-cursor with scale also lets you take rough on-screen measurements of what you’re looking at, rather than just eyeballing it. None of that sounds dramatic until you’re on a job where the inspection point doesn’t present itself “the right way up” — being able to flip the image and measure a gap or a crack on the spot saves you repositioning the probe just to get your bearings.

Built for the Conditions You Actually Work In

Confined-space inspection rarely happens in clean, dry conditions. Pipes are wet. Engine bays are oily. Drains are, well, drains. The M40’s probe carries an IP67 ingress protection rating, so it’s built to shrug off moisture, dust, and oil contamination, and to tolerate brief accidental immersion — the kind of wet, grimy conditions plumbing, drainage, and mechanical inspection work actually involves. The tube itself is a tungsten-wire-braided, wear-resisting sheath, so it’s built to be dragged through rough bores and tight bends repeatedly without the outer casing giving out. The probe tip is also rated to handle temperatures from -20°C to 70°C, so it copes with genuinely hot inspection points — a warm engine bay or duct run — not just room-temperature pipework.

On the handheld unit itself, a high-strength aluminium alloy quick-release probe connector is engineered for improved heat dissipation — Coantec states roughly triple the heat dissipation efficiency of a standard connector — which supports more stable performance if you’re running the unit continuously across a full day of inspections rather than short bursts. The main unit weighs approximately 0.89kg including base and battery, which keeps it manageable for one-handed operation and extended handheld use without the fatigue that comes from a heavier, bulkier inspection camera. The handheld unit itself is designed for a -10°C to 50°C operating range, with 15–90% relative humidity tolerance — comfortable across most Australian workshop and site conditions.

Power comes from a built-in, replaceable 5000mAh lithium battery rated for 4+ hours of continuous use — enough to get through a typical inspection run without a mid-job recharge, and with the option to carry a spare battery for back-to-back jobs. Charging is via Type-C (which also handles data transfer to a PC), and the unit also outputs to Mini-HDMI if you want to run footage to an external monitor for a client or a larger crew to see. A quick-release magnetic base is also included, letting you set the handheld unit down on any ferrous surface — a vehicle chassis, a steel frame, a machine housing — so you’ve got both hands free to manoeuvre the probe itself, which matters a lot more than it might sound like on paper once you’re actually threading a probe through a tight bend.

Documentation That Actually Holds Up

An inspection is only as useful as the record you can produce afterwards. The M40 captures photos and video in JPEG, BMP, and MP4 formats, with support for on-screen annotation and time stamps, and switchable colour, black-and-white, or negative-film display modes plus 0–9 level brightness adjustment for awkward lighting inside a cavity. Footage is saved to 32GB of internal storage, backed up by an 8GB TF card supplied in the box (32GB cards available as an optional upgrade), so you’re not stuck juggling files off a nearly-full memory card mid-job. That means you can mark up exactly where a defect sits, note the time of capture, and hand over footage or stills that stand up as evidence — whether that’s for a compliance report, a warranty claim, an insurance assessment, or simply proving to a customer that the blockage really was as bad as you said it was. More than ten system languages are supported on the interface, which is a practical plus for multi-technician teams or training environments where not everyone’s first language is English.

What’s in the Box

Every M40-60 series unit ships as a complete kit, not just a bare probe: a standard hard instrument case, the handheld unit with battery installed, the quick-release magnetic base, an 8GB TF card, a card reader, and a Type-C charging cable with adaptor for direct charging. If your job calls for it, a non-magnetic base, an HDMI cable, and a 32GB TF card upgrade are all available as optional extras — worth asking about at the time of quote if you know you’ll need them.

Choosing Your Cable Length

Because the M40-60 series is built around a common 6mm probe head, 2MP sensor, and 85° field of view, the decision that actually matters is reach:

• M40-6015 (1.5m cable) — suited to shorter-run inspections: small appliance internals, compact machinery, shallow drain runs, and bench-based diagnostic work where you don’t need a long lead getting in your way.
• M40-6030 (3m cable) — a practical mid-length option for general trade use: engine bays, HVAC ducting sections, standard domestic and light commercial plumbing runs.
• M40-6050 (5m cable) — built for longer horizontal runs and multi-storey access, such as extended drainage lines, longer HVAC duct sections, and larger plant or vessel inspections.
• M40-6100 (10m cable) — the long-reach option for extended pipeline runs, deep bore inspection, underground drainage, and industrial plant work where the inspection point is simply a long way from where you can stand.

All four share the same 10–100mm short-focus optics, 85° FOV, and 2-megapixel imaging, so the footage quality and close-up detail is consistent regardless of which cable length the job calls for — you’re only trading off on reach, not image performance.

Where the M40 Earns Its Keep

Coantec’s own application notes for the M40 series span aerospace component inspection, automotive engine and transmission diagnostics, power generation (boiler pipelines, heat exchangers, transformer oil tanks, wind turbine gearboxes), petrochemical pipeline and tank inspection, rail transit component checks, construction inspection of drainage and ventilation systems, pressure vessel and boiler safety assessment, and technical education and training use. For most Australian trade and maintenance customers, that translates to more everyday jobs: drain and plumbing diagnostics, HVAC duct inspection, automotive and small engine diagnostics, and general mechanical or structural inspection where getting eyes inside a cavity beats guessing from the outside.

Backed by Rapid-Tech

Buying an inspection camera sight-unseen from an overseas marketplace listing means you’re on your own if something doesn’t work as expected, or if you’re not sure which cable length actually suits your job. Rapid-Tech stocks the M40-60 series locally, can talk you through which variant fits your application before you commit, and is on hand for support after the sale — not just at the point of purchase. If you need a quote, or you’re not sure whether the 3m or 5m cable is the right call for your job, get in touch and we’ll help you get the right kit sorted the first time.

TECHNICAL SPECIFICATIONS

Cable Length Variants

What is the Coantec M40 videoscope used for? The Coantec M40 is an industrial videoscope (borescope) used to visually inspect the inside of pipes, ducting, engine components, and other confined spaces that can’t be accessed directly. It’s used across plumbing and drainage, HVAC, automotive and small engine diagnostics, and industrial maintenance for tasks like locating blockages, checking weld seams, and diagnosing internal faults without dismantling equipment.

Is the Coantec M40 probe waterproof? The M40 probe carries an IP67 ingress protection rating, meaning it’s protected against dust and moisture and can tolerate brief accidental immersion — suitable for wet, oily, and dusty inspection environments such as drainage lines and damp pipework. It is not rated for continuous or deep underwater use.

What’s the difference between the M40-6015, M40-6030, M40-6050, and M40-6100? All four share the same 6mm probe diameter, 2-megapixel sensor, 10–100mm short-focus optics, and 85° field of view. The only difference is cable length: 1.5m, 3m, 5m, and 10m respectively. Choose based on how far the inspection point is from where you’ll be standing or operating the handheld unit.

How far can the M40 probe reach? Reach depends on the SKU selected. The M40-6015 offers 1.5m, the M40-6030 offers 3m, the M40-6050 offers 5m, and the M40-6100 offers 10m of probe cable — covering everything from short bench-based diagnostics to long pipeline and bore inspection runs.

Can the M40 probe bend around corners? Yes. The probe supports 360° omnidirectional articulation via mechanical control, allowing it to be manoeuvred around bends and through cavities rather than only travelling in a straight line.

Does the M40 record video and photos? Yes. It captures photos and video in JPEG, BMP, and MP4 formats, with on-screen time stamping and annotation support for documentation and reporting purposes.

How long does the M40 battery last? The built-in 5000mAh lithium battery provides 4 or more hours of continuous use per charge, and the battery is replaceable for extended field use.

What temperature range can the M40 probe handle? The probe tip is rated from -20°C to 70°C, so it can be used on genuinely hot inspection points such as an engine bay or duct run, not just room-temperature pipework. The handheld unit itself is rated for -10°C to 50°C operating conditions and 15–90% relative humidity.

What’s included when you buy the Coantec M40? Each unit ships as a complete kit: hard instrument case, handheld unit with battery, quick-release magnetic base, 8GB TF card, card reader, and a Type-C charging cable with adaptor. A non-magnetic base, HDMI cable, and 32GB TF card are available as optional extras.

The post Coantec M40 6mm Videoscope | IP68 Borescope Camera appeared first on rapid-tech.

The Coantec C68 Series Industrial Videoscope is a cutting-edge non-destructive visual inspection device designed to meet the demands of industries such as aviation, aerospace, energy, electric power, chemical, machinery, automotive, military, and specialized inspection fields. ​

With its advanced features and superior performance, this multifunctional videoscope ensures precise inspections, enhanced productivity, and improved safety. ​

Key Features

8-Inch IPS HD Touch Screen: ​ The C68 Series boasts a large 8-inch industrial-grade IPS full-view HD touch screen, offering exceptional image quality with true color reproduction. ​ Its wide viewing angle and responsive touchscreen reduce visual fatigue, making inspections more comfortable and efficient. ​

High-Resolution Camera: Equipped with a 1,000,000-pixel HD industrial camera, the videoscope delivers crystal-clear images and smooth video without delays or trailing. ​ Optional configurations include cameras with up to 2,000,000 pixels for even greater detail.

Electric Joystick & Virtual Joystick: ​ The electric joystick, combined with a touchscreen virtual joystick, provides precise control of the probe, allowing 360° articulation in any direction. ​ Users can also configure a mechanical joystick for added flexibility.

Expandable Storage: ​ The device comes with 16GB of standard storage, expandable up to 128GB, ensuring ample space for storing inspection data. ​ Dual USB ports allow for easy data transfer via external USB drives. ​

3D Measurement Function (Premium Version): ​ The premium version includes a binocular stereo imaging measurement system capable of measuring length, depth, area, and more with an accuracy of 0.01mm and an error margin of ±5%. ​ This feature is ideal for identifying subtle defects and conducting precise measurements. ​

LAN Live Streaming: ​ The LAN live streaming function enables real-time image sharing with mobile devices via QR code scanning, making it perfect for expert consultations and collaborative inspections. ​

Durable Design: ​ The host is protected by TPU rubber-coated anti-collision corners, ensuring shock and fall resistance. ​ The insertion tube is made of tungsten wire wear-resistant braided material, with an IP67 ingress protection rating for durability in harsh environments. ​

Long Battery Life: ​ Powered by a replaceable high-capacity rechargeable lithium battery, the C68 Series offers up to 6 hours of continuous operation with a mechanical joystick and 4 hours with a motor-control joystick. ​

Technical Specifications

• Host Size: 245mm x 195mm x 95mm ​
• Host Weight (Including Battery): 2.85kg ​
• Operating Temperature: -20°C to 60°C ​
• Storage Temperature: -40°C to 60°C ​
• Relative Humidity: 15%-90% ​

Applications

The Coantec C68 Series is ideal for inspecting hard-to-reach areas, ensuring better product quality and safe equipment operation. ​ Its versatility makes it suitable for industries such as aviation, automotive, energy, and more. ​

Why Choose Coantec C68 Series?

With its innovative features, robust design, and high-performance capabilities, the Coantec C68 Series Industrial Videoscope is the ultimate solution for professionals seeking reliable and precise inspection tools. ​ Whether you need detailed imaging, 3D measurements, or collaborative live streaming, this device delivers unmatched functionality and efficiency.

The post Coantec C68 Series Industrial Videoscope – 8-Inch HD Touch Screen, 3D Measurement, High-Resolution Camera, Durable Design, LAN Live Streaming appeared first on rapid-tech.

The Coantec C60 Series Industrial Videoscope is an advanced visual inspection device designed for industries like aerospace, energy, petrochemicals, automotive, machinery manufacturing, food processing, and more. With state-of-the-art features and durable construction, this tool ensures precise inspections, improved quality control, and safer equipment operations.

Top Features of the Coantec C60 Series Videoscope

Ultra HD Industrial Camera for Clear Visuals

The Coantec C60 is equipped with an ultra HD camera, delivering sharp, detailed images with vibrant colors. Paired with a 7-inch or 12-inch HD display screen, it provides a large viewing area for real-time monitoring of internal surfaces and structures. The rear-mounted fiber optic lens enhances image quality, making it ideal for high-precision tasks like turbine inspections.

Customizable Replaceable Insertion Tube

The replaceable insertion tube system offers flexibility with options for varying tube lengths, diameters, and materials. The tungsten alloy wire tube is wear-resistant, waterproof, and corrosion-proof, while the alloy spring tube provides flexibility and heat resistance for challenging inspections.

Ergonomic Design for Easy Handling

The ergonomic handle ensures comfortable, efficient operation. Choose between a mechanical joystick for manual control or an electric handle for smooth probe articulation. The 360° all-way articulation allows access to tight or hard-to-reach spaces, perfect for comprehensive inspections.

Durable Anti-Collision Host Design

The 7-inch host is built with an anti-collision design, including high-density silicone cushioning. This ensures long-term durability, protecting the device during transportation and rigorous use.

Extended Battery Life for Uninterrupted Inspections

With a 3200mAh lithium battery, the Coantec C60 offers over 4 hours of continuous operation. It also supports online charging, making it perfect for extended industrial inspections without downtime.

IP67 Waterproof and Dustproof Ratings

The insertion tube is rated IP67 for water and dust resistance, making it reliable in tough environments. An oil-resistant option is available for applications like wind turbine gearbox inspections and power equipment maintenance.

Technical Specifications

• Display Resolution: 1024×600 (7-inch) / 1024×768 (12-inch)
• Camera Resolution: Up to 1,000,000 pixels
• Tube Length: 1-10 meters
• Probe Diameter: Φ2.0 to Φ8.0
• Storage: 8GB SD card (expandable to 32GB)
• Operating Temperature: -10°C to 50°C (device) / -20°C to 60°C (probe)

Applications

The Coantec C60 Series is perfect for detecting pipeline weld defects, casting imperfections, machining flaws, and equipment malfunctions. Its user-friendly interface and customizable features make it suitable for both beginners and professionals.

Why the Coantec C60 is the Best Industrial Videoscope

• Customizable Options: Tailor tube length, diameter, lighting modes, and software functions to your needs.
• User-Friendly: Intuitive menus and simple controls make operation easy.
• Durable Build: Anti-collision design and wear-resistant tubes ensure long-term reliability.

What’s Included in the Standard Package

• Coantec C60 Videoscope
• Protective instrument case with tube storage tray
• Two lithium batteries
• Power adapter and charger
• 8GB SD card with card reader
• User manual and safety guide

Optional accessories: HDMI cables, handheld casing, and pipe centralizers for enhanced functionality.

Upgrade Your Inspections with the Coantec C60 Series

Whether you’re in aerospace, automotive, or energy equipment maintenance, the Coantec C60 Series Industrial Videoscope is the ultimate tool for precise, reliable inspections. Its customizable features, durable design, and user-friendly controls make it an asset for any industry.

Optimize your visual inspections today with the Coantec C60 Series – a trusted solution for professionals worldwide!

The post Coantec C60 Series Industrial Videoscope | HD Camera, Customisable Insertion Tube, 360° Articulation, Waterproof & Durable appeared first on rapid-tech.

Introducing the Coantec X3 Intrinsically Safe Camera, a reliable and advanced tool designed to meet your inspection needs in various industries. With a focus on safety and precision, the Coantec X3 offers exceptional features that make it the ideal choice for professionals seeking an intrinsically safe camera solution.

Intrinsically Safe Design for Hazardous Environments

The Coantec X3 is specially engineered to operate safely in hazardous environments, making it suitable for a wide range of applications. Whether you’re working in oil and gas, chemical, or other industries with potentially explosive atmospheres, the Coantec X3 provides peace of mind with its intrinsically safe design.

Advanced Camera Capabilities for Clear Imaging

Equipped with a high-resolution camera, the Coantec X3 delivers clear and detailed imaging for accurate inspections. Its diverse camera options, including focus, wide angle, telephoto, and measurement cameras, allow you to inspect targets at different distances and capture clearer images. No matter the inspection task, the Coantec X3’s advanced camera capabilities ensure exceptional visual clarity.

Dual Engine Power Supply for Long Battery Life

To support your demanding inspection needs, the Coantec X3 features a dual-engine power supply mode. The display screen comes with a built-in high-capacity lithium polymer battery, while the handle is equipped with a replaceable backup battery. These two power sources can be charged with each other, providing a long battery life of over 5 hours of continuous working time.

High Precision 3D Measurement Function (Optional)

For those requiring advanced measurement capabilities, the Coantec X3 offers an optional 3D measurement system. With the option to upgrade to the 3D measurement system, you can measure length, vertical, multisegment, and depth with an impressive accuracy of 0.01 mm and an error rate of ≤ 5%. This feature ensures precise and reliable measurements for your critical inspection tasks.

Ample Storage Space for Efficient Data Management

Data storage is essential for inspection professionals, and the Coantec X3 addresses this need with its large capacity storage space. With a standard 16GB built-in storage (option for 32GB or 64GB), you have ample space to store inspection data. Additionally, two USB ports are available for external U disks, allowing for convenient and quick data access, ensuring efficient data management.

Experience the power and reliability of the Coantec X3 Intrinsically Safe Camera. With its advanced features, intrinsically safe design, and exceptional performance, the Coantec X3 is the ultimate inspection companion for professionals working in hazardous environments. Invest in the Coantec X3 today and elevate your inspection capabilities to new heights.

The post Videoscope Coantec X3 Intrinsically Safe Camera appeared first on rapid-tech.

It allows you to connect your smartphone and use the operating handle to control the camera tube for clearer, detailed views of any potential issues in hard-to-reach places.

You can utilize your smartphone to view, store, and share video files with clients while also adjusting the settings.

Its ultra high definition camera has 1,000,000 pixels and a view angle of 120° which lets it capture vivid images or videos from 8mm to 80mm depths with front LED lighting or optional optical fiber lighting.

The 6.6mm diameter probe makes it easy and practical to use while its strong adaptability avoids corrosion or oil damage. This economical tool is perfect for quick and accurate diagnoses for all types of automotive repairs!

The post Coantec Videoscope X1 Automotive Endoscope appeared first on rapid-tech.

• Clear images, vivid colors
• Compact, light and flexible
• Comfortable hand feeling, simple operation
• Present real inspection details anytime, anywhere
• Large storage capacity, long-life battery

Present real inspection details anytime

This exceptional borescope is customizable with either super fine rigid tube or flexible tube, and thanks to its universal Type-C interface connection it can be easily swapped out for different scenarios. Plus, weighing just 0.2kg along with a handy portable case, you’ll be able to take your inspections on the go whenever necessary in order make them easier and more efficient.

Large storage capacity, long-life battery

Outfitted with an 8G memory card, you can store up to 20,000 photos in this device. It is powered by a rechargeable lithium battery that provides reliable and long-lasting energy of over six hours for extended work sessions. The battery is easy to replace and the operation is flexible.

Clear images, Vivid colors anywhere

High-definition camera, with clear and delicate picture quality, bright colors, truly restores the different color levels of inspected objects, and more intuitively presents the internal cavity of the workpieces or the internal details of the equipments.

Compact, light and flexible

Simple and lightweight, sleek and compact shape, and internal defects,are in your control.One button to take images, shoot and record arbitrary switch, more flexible operation.

Comfortable hand feeling and simple operation

With an ergonomic design, the arc curve fits the palm, making it more comfortable to hold. More tactile physical buttons, simple and clear menu interface, simple and practical functions, easy operation, and convenient maintenance.

The post Coantec Toolscope C-ONE Videoscope Borescope appeared first on rapid-tech.

Coantec ME+ automotive endoscope uses a 3.5-inch high-definition display screen, megapixel high-definition industrial camera, which gives a more vivid and clear image. The image is stored in BMP lossless format, so the quality of the image is not affected. By taking photos and recording videos, users can obtain high-quality static images and dynamic video clips.

    It is easy to use, economical, and practical

The post Automotive Endoscopes of Coantec ME+ series appeared first on rapid-tech.

The Coantec C65 is an industrial video endoscope with high resolution that can perform 3D measurements. The product uses a large 6.5-inch touchscreen coupled with a high-resolution 720P industrial camera to create an image with greater clarity and color. The device can perform the precise functions of point-to-point, point-to-line, point-to-surface, depth, and area measurement. The joystick utilizes a single-touch electric control method that greatly enhances the probe’s positioning capability. This handheld unit can be used in many fields such as aerospace, automobile manufacturing, precision casting, railway, shipbuilding, energy, electricity and so on.

3D Measurement Function

The user can measure the appearance size of the object in many ways, such as point-topoint, point-to-line, point-to-surface, multiline segment, and area. The measurement resolution is 0.01mm and the measurement error is less than 5%.

High Quality Image

It adopts 6.5-inch high-definition touch screen,megapixel highdefinition industrial camera and high color reproduction,which makes the image quality clear and delicate, effectively observing the subtle defects inside the object.

Replaceable Insertion Tube System

Users can quickly replace insertion tubes of different diameters, lengths and depths of field according to the situation, realizing multiple functions in one machine and meeting more field needs.

360°All-way Articulation Probe

The probe is made of alloy material,360° all-way articulation, dustproof and waterproof grade up to IP67, strong corrosion resistance, more wear-resistant, custom-made oil-proof series, suitable for more severe testing environments.

Rear-mounted LED Optical Fiber Light Guide

The use of rear-mounted LED optical fiber light guide lighting has higher brightness and better sealing performance, which effectively extends the service life of the probe.

C Gesture Image Auto Flip Function

Equipped with G-sensor, the picture can be automatically flipped through the C gesture, so that the image is always at the best viewing angle of the inspector.

Image File Processing Function

Users can zoom in, zoom out, restore, delete, rename files, add watermarks, do graffiti and other operations on the picture.In the graffiti interface, you can set the brush and character format, add text and graphic notes.

Easy Operation, Improved Efficiency

Adopting a new humanized user interface design, more tactile physical buttons and sensitive touch buttons, with a zero-delay electric control joystick, which makes it smooth movement, precise positioning, laborsaving operation, and effectively improve detection efficiency.

Lightweight, Portable and Durable

The host adopts a lighter design and is equipped with a quick-release special shoulder strap, which is more convenient to carry and operate, and fully reduces the burden on the inspectors.The ergonomically designed handle is easy to hold and manipulate. Equipped with a dedicated instrument case, shockproof and impact resistant, more robust and durable.

The post Coantec C65 High Definition Industrial Videoscope | 3D Measuring Videoscope appeared first on rapid-tech.

Hand-held design, 5 inch LCD daylight display, and high definition image sensor technology all make this product stand out in the market.

The image is much clearer and can be recorded or photographed. 

The probe is corrosion-resistant, wearable, dust-proof, and waterproof, and meets IP67 requirements.

Bright daylight display with new intelligent software system

The COANTEC C50 industrial videoscope features an LCD daylight display that is easily visible even in the sun. The new interaction software is more human, scientific, more powerful and more efficient and very user friendly.

HD camera with millions of pixels, excellent image processing technology

Miniature 720P HD image sensor makes the image more delicate and the color more realistic, the image is uncompressed, the resolution is up to 1280*720, and every real detail is restored.

HDMI HD video output

Equipped with HDMI video output interface, connected to the PC through a dedicated data cable, suitable for expert consultation, helping to quickly find the defect of the detected object.

100,000 Lx super light + Large field of view

Illumination is 50 times higher than that of ordinary endoscopes. It is suitable for dark and harsh environments. It has 8 levels of brightness adjustment function. The light source can be adjusted according to the environment during the testing.With a larger depth of field and a larger angle of view, even first-time users can get good visual effects.

Double tungsten alloy braided insert tube of 4 layers Oilproof, waterproof, wearable and durable Stable and reliable laser welding process

The insertion tube is woven with tungsten alloy wire, which has a tighter braiding layer than the stainless steel wire insertion tube, which improves the wear resistance of the insertion tube by 20 times and effectively prolongs its service life. The C50 Series camera uses sapphire protection lenses to effectively prevent the lens from being damaged twice.

Intelligent Navigation Menu

The navigation menu design is simple and clear, easy to understand and easy to use, novices can get started without training. Support ten languages: Simplified Chinese,Traditional Chinese,English, Japanese, Korean, German, French, Portuguese, Spanish, Russian. 0.1 second automatic exposure, automatic noise reduction, fast capture of the real details of the detected object, and feedback through highdefinition pictures.

Intelligent and Humanized Design Multi-function Joystick

The unique rocker closed-loop control technology enhances the bending sensitivity and steering control of the probe for more precise operation. The multi-function joystick has one-key lock, step-by-step fine adjustment, fast and slow adjustment, automatic reset, OK confirmation, menu navigation function, making inspection work easier.

Complete accessories, long-lasting battery life

One hand-held design,the whole machine (with battery) weighs only 1.35kgs, optional leather shoulder bag, safe and portable, Whether it’s checking the fan gearbox on a 100-meter tower or a complex large machine, the C50 Industrial Videoscope is designed to make it easier to use. The outer packaging is made of industrial grade anti-drop design. It is light and easy to carry. It can be easily placed in the luggage racks such as airplanes, high-speed rails and trains during business trips. The internal design is compact and sturdy, with both solid and solid protection. The C50 Videoscope guarantees endurance from multiple angles. It uses low-energy technology in product design to achieve a battery life of 4 hours and is equipped with a set of spare batteries to support long-term inspection.

For more detailed information about the GB3836 and IECEx standards, please visit this link. This page explains how the Chinese Standard GB3836 is basically adopted from the IECEx standard. By selecting the Coantec C50, users are choosing a product that prioritises safety and robustness, built to international standards.

The post Coantec C50 Intrinsically Safe Videoscope | Industrial borescope with illumination 4x magnification appeared first on rapid-tech.

An easy to operate lightweight, portable Flexible Videoscope with robust construction built specifically for police, military, security, fire control, customs and other Institutions that carry out work such as law enforcement, criminal investigation, explosive disposal, security inspection, anti-smuggling, search & rescue to name just a few. The Coantec CP36 Flexible Videoscope has both white light and infrared light capability which can easily be switched with one key on the intuitive integrated hand-held control module. Live previews, photography, video recording and playback functions are all included as standard with an optional Wi-Fi module allowing real-time output to compatible devices to enable multi person viewing if desired.

• 360° all-way articulating 6 mm Camera Probe than can bend back on itself up to 150°
• Integrated dual Infrared/white light sources available with a single switch
• Real-time monitoring/photographing/recording/ plus an instant playback function
• Go Dark mode means display brightness can promptly be shut off by the power key
• A durable waterproof and dustproof battery design incorporating reverse polarity connection protection
• Fast replacement of an alternative insertion tube to tailor cable length to current situation (optional)
• Wi-Fi module to support wireless image transmission to other devices (optional)
• Audio module with headset to monitor and record sound (optional)
• Handheld telescopic rod to extend operational reach (optional)

The post Coantec CP36 Flexible Police Videoscope with IR illumination appeared first on rapid-tech.