AC/DC Clampmeters Archives - rapid-tech

KYORITSU 2012RA Digital Multimeter with AC/DC Clamp Sensor

Mike — Sun, 17 Feb 2019 07:50:38 +0000

The KYORITSU 2012RA Digital Multimeter is specially designed for electrical and electronic testing in all kinds of applications, featuring a range of features that make the job easier. With its AC/DC current measurement capability of up to 60/100/120A, it is perfect for troubleshooting electrical and electronic installations in residential, commercial and industrial settings. Its open clamp sensor makes this multimeter ideal for working in tight spaces where a normal clamp meter would be unsafe or too cumbersome to use. It is also great for measuring the output of a solar panel in photovoltaic installations.

For DC current measurements, the KYORITSU 2012RA Digital Multimeter is perfect for testing and servicing cars, electric forklifts, small electric cars or trolleys for cleaning, DC motor adjustable speed controllers, golf cars and trolleys, small electric cars and chairlifts for the disabled, work platforms, UPS’s, electric scooters and bikes. It also has True RMS readings of AC current and voltage, so it can accurately measure harmonics created by PC’s, Inverters, Electronic Ballast for florescent lamps and UPS.

The KYORITSU 2012RA Digital Multimeter now has enhanced cable durability due to the addition of new rubber protection. The holster is capable of holding the test probe, and the test lead cap is included to prevent any short circuit accidents.

Overall, the KYORITSU 2012RA Digital Multimeter is an ideal tool for a range of electrical and electronic testing tasks due to its wide array of features that make the job easier. With its accurate readings and open clamp sensor, it is a must-have for any electrician or technician.

The post KYORITSU 2012RA Digital Multimeter with AC/DC Clamp Sensor appeared first on rapid-tech.

Kyoritsu 2009R AC/DC Digital Clamp Meter – 2000A

Mike — Wed, 15 Nov 2017 20:13:55 +0000

Kyoritsu 2009R KEW 2009R AC/DC Digital Clamp Meter

The Kyoritsu 2009R AC/DC Digital Clamp Meter has teardrop-shaped jaws for ease-of-use in accessing crowded cable areas and other tight situations. Its data hold function allows easy readings in dimly-lit or otherwise hard-to-read locations. The Kyoritsu 2009R provides a wide measuring range and takes True RMS readings of AC current or voltage with distorted waveform.

Kyoritsu 2009R Features:

CAT IV clampmeter measures voltage and current in both very low and high power circuits
Accurate True RMS reading of AC current or voltage with distorted waveform
Measures AC and DC currents up to 2000 A
Provides frequency reading in AC current or voltage measurement
Auto-ranging feature on current, voltage and resistance ranges
Dynamic range of 4200 counts full scale
Wide frequency range from 20 Hz to 1 kHz
Easy continuity checking, with bleeper
Average function for easy reading of input with large variation
Peak function for measuring a peak of input
Auto-null function for easy zero adjustment
Provides recorder output for long hour monitoring
Auto-power-off feature to conserve battery power
55mm diameter teardrop-shaped jaws
Shrouded jaws enhance safety
Terminal cover prevents use of incorrect terminal
Dimensions 250 x 105 x 49 mm
Weight 540 g approximately (including batteries)

Kyoritsu 2009R Safety Catagory:

IEC 61010-1 CAT IV 600V, CAT III 1000V Pollution Degree 2, IEC 61010-031, IEC 61010-2-032, IEC 61326-1, IEC 61326-2-1

Kyoritsu 2009R Specifications:

AC A	400.0/2000A ±1.3%rdg±3dgt (0 – 400.0A, 150 – 1700A) (45 – 66Hz) ±2.0%rdg±5dgt (0 – 400.0A, 150 – 1700A) (20Hz – 1kHz) ±2.3%rdg±3dgt (1701 – 2000A) (45 – 66Hz)
DC A	400.0/2000A±1.3%rdg±2dgt
AC V	40.00/400.0/750V ±1.0%rdg±3dgt (45 – 66Hz) ±1.5%rdg±5dgt (20Hz – 1kHz)
DC V	40.00/400.0/1000V±1.0%rdg±2dgt
Ω	400.0/4000Ω ±1.5%rdg±2dgt (Electronic protection (no fuse) up to 600V)
Continuity buzzer	Buzzer sounds below 20Ω
Hz	10.0 – 4000Hz±1.5%rdg±5dgt (Input sensitivityCurrent: more than 40AVoltage: more than 10V)
Conductor size	Ø55mm max.
Output	Recorder : DC400mV against AC/DC400.0A DC200mV against AC/DC2000A
Applicable standards	IEC 61010-1 CAT IV 600V, CAT III 1000V Pollution degree 2 IEC 61010-031, IEC 61010-2-032, IEC 61326-1, IEC 61326-2-1
Power source	R6 (1.5V) × 2
Dimensions	250(L) × 105(W) × 49(D)mm
Weight	Approx. 540g (including batteries)
Included Accessories	7107A (Test leads), 8201 (Output plug), 9094 (Carrying case) R6 (AA) (1.5V) × 2, Instruction Manual
Optional Accessories	7256 (Output cord)

The post Kyoritsu 2009R AC/DC Digital Clamp Meter – 2000A appeared first on rapid-tech.

Kyoritsu 2055 1000A Digital AC/DC CAT IV Clamp Meter

Mike — Sat, 11 Nov 2017 22:40:07 +0000

Kyoritsu 2055 1000A Digital AC/DC CAT IV Clamp Meter

The Kyoritsu 2055 1000A Clamp Meter is designed to meet international safety standard IEC 61010-1 CAT IV 600V and is a digital clamp meter with the capability to read current up to 1000A AC/DC.

The Kyoritsu 2055 also features a data hold function and peak hold function, as well as the ability to measure resistance up to 60MΩ. It also has a max/min function that displays and holds the maximum and minimum values during a set period of time.

The Kyoritsu 2055 has a non-contact voltage function, warning the user of AC voltage via a red LED indicator. Ergonomically designed it has a double moulded construction and features a bar graph digital display.

Kyoritsu 2055 Features:

Measures up to 1000A AC/DC.
Measures up to 600V AC/DC.
Designed to meet international safety standard IEC 61010-1 CAT IV 600V.
40mm jaw size.
Max/min function.
Measures resistance up to 60MΩ.
Peak hold function.
Double moulded construction.
Auto power off and auto power save.
Data hold function.
Bar graph digital display.

Kyoritsu 2055 Specifications:

AC A	0 – 600.0/1000A ±1.5%rdg±5dgt (50/60Hz) ±3.0%rdg±5dgt (40 – 400Hz)
DC A	0 – 600.0/1000A ±1.5%rdg±5dgt
AC V	6/60/600V Auto Ranging ±1.3%rdg±4dgt (50/60Hz) ±3.0%rdg±5dgt (40 – 400Hz)
DC V	600m/6/60/600V Auto Ranging ±1.0%rdg±3dgt
Ω	600/6k/60k/600k/6M/60MΩ (Auto Ranging) ±1%rdg±5dgt (600 – 6M) / ±5%rdg±8dgt (60M)
Continuity buzzer	Buzzer Sounds at 100Ω
Frequency/DUTY	10/100/1k/10kHz (Auto Ranging) / 0.1 – 99.9%
Conductor size	Ø40mm
Safety Standard	IEC 61010-1 CAT IV 600V, IEC 61010-031, IEC 61010-2-032, IEC 61326
Power source	R03 (1.5V) (AAA) × 2
Dimensions	254(L) × 82(W) × 36(D)mm
Weight	310g
Included Accessories	7066A (Test leads) 9094 (Carrying case) Instruction Manual

The post Kyoritsu 2055 1000A Digital AC/DC CAT IV Clamp Meter appeared first on rapid-tech.

Kyoritsu 2056R 1000A TRMS Digital AC/DC CAT IV Clamp Meter

Mike — Sat, 11 Nov 2017 22:14:52 +0000

Kyoritsu 2056R 1000A TRMS Digital AC/DC CAT IV Clamp Meter

The Kyoritsu 2056R is a digital clamp meter is designed to meet international safety standard IEC 61010-1 CAT IV 600V and has the capability to read current up to 1000A AC/DC. The 2056R model features True RMS measurements providing greater accuracy on non-sinusoidal and distorted waveforms.

The Kyoritsu 2056R also features a data hold function and peak hold function, as well as the ability to measure resistance up to 60MΩ. Temperature can be measured using an additional probe (not supplied) and capacitance can be tested. In addition, a max/min function is available to display the maximum and minimum values during a set period of time.

Furthermore, the tester has a non-contact voltage function, warning the user of AC voltage via a red LED indicator. Ergonomically designed, the Kyoritsu 2056R comprises a double moulded construction and features a bar graph display with backlight, for testing in low light conditions.

Kyoritsu 2056R Features:

Measures up to 1000A AC.
True RMS.
Measures up to 600V AC/DC.
Capacitance test.
Designed to meet international safety standard IEC 61010-1 CAT IV 600V.
40mm jaw size
Max/min function.
Temperature between -50°C amd +300°C (probe not supplied).
Measures resistance up to 60MΩ.
Peak hold function.
Double moulded construction.
Auto power off
Data hold function.
Bar graph display with backlight.

Kyoritsu 2056R Specifications:

AC A (RMS)	0 – 600.0/1000A ±2.0%rdg±5dgt (50/60Hz) ±3.5%rdg±5dgt (40 – 500Hz)
DC A	0 – 600.0/1000A ±1.5%rdg±5dgt
AC V	6/60/600V Auto Ranging ±1.5%rdg±4dgt (50/60Hz) ±3.5%rdg±5dgt (40 – 400Hz)
DC V	600m/6/60/600V Auto Ranging ±1.0%rdg±3dgt
Ω	600/6k/60k/600k/6M/60MΩ (Auto Ranging) ±1%rdg±5dgt (600 – 6M) / ±5%rdg±8dgt (60M)
Continuity buzzer	Buzzer Sounds at 100Ω
Capacitance test	400n/4µ/40µF(Auto Ranging)
Temperature	-50ºC – +300ºC (With the use of Temperature probe 8216)
Frequency/DUTY	10/100/1k/10kHz (Auto Ranging) / 0.1 – 99.9%
Conductor size	Ø40mm
Safety Standard	IEC 61010-1 CAT IV 600V, IEC 61010-031, IEC 61010-2-032, IEC 61326
Power source	R03 (1.5V) (AAA) × 2
Dimensions	254(L) × 82(W) × 36(D)mm
Weight	310g
Included Accessories	7066A (Test leads) 9094 (Carrying case) Instruction Manual
Optional Accessories	8216 (Temperature probe)

The post Kyoritsu 2056R 1000A TRMS Digital AC/DC CAT IV Clamp Meter appeared first on rapid-tech.

KYORITSU 2033 AC/DC 300 Amp Clampmeter

Mike — Tue, 12 Apr 2016 08:08:58 +0000

KYORITSU 2033 AC/DC 300 Amp Clampmeter Specification:

AC Current	0A to 40A 20A to 200A 200A to 300A	50/60Hz	±1% of rdg ±4 dgts ±1.5% of rdg ±4 dgts ±3.5% of rdg
	0A to 40A 20A to 200A 200A to 300A	20Hz to 1kHz	±2.5% of rdg ±4 dgts ±2.5% of rdg ±4 dgts ±4.0% of rdg
DC Current	0A to 40A 20A to 200A 200A to 300A		±1% of rdg ±4 dgts ±1.5% of rdg ±4 dgts ±3.0% of rdg
Conductor Size	24mm maximum
Safety Standard	IEC 61010-1 CAT III 300V IEC 61010-2-032
Frequency Response	DC, 20Hz to 1kHz
Withstand Voltage	3700V AC for 1 minute
Power Source	Two (2) type ‘AA’ LR44 Alkaline 1.5V batteries
Dimensions	147mm (L) x 59mm (W) x 25mm (D)
Weight	100g approx.

Note : ◇During current measurement, keep the KYORITSU 2033 transformer jaws fully closed. Otherwise,accurate measurement cannot be made. The maximum measurable conductor size is approx. 24mm in diameter. ◇Unlike in DC current measurement, zero adjustment is not necessary in AC current measurement. There is no polarity in the reading either.

KYORITSU 2033 Sleep Function.

This is a function to prevent the instrument from being left powered on in order to conserve battery life. This function causes the instrument to go into the Sleep (powered-down) mode about 5 minutes after the last switch or button operation. To exit the Sleep mode, turn the Function Selector switch back to “OFF”, then to any other position, or press any button.

The post KYORITSU 2033 AC/DC 300 Amp Clampmeter appeared first on rapid-tech.

Kyoritsu 2300R AC/DC Fork Current Tester

Mike — Fri, 18 Mar 2016 20:21:45 +0000

Kyoritsu 2300R AC/DC Fork Current Tester Description

Due to the use of thyristors, inverters and other energy-saving controllers in recent electric wiring, current waveforms often include harmonic components and are distorted compared to sinusoidal waves (50/60Hz). The Kyoritsu 2300R True RMS current tester is able to measure distorted waveforms using true RMS since waveforms are being internally calculated continuously. In contrast, when measurements are made with a averaging value tester, errors are generated in the measurement value because the tester cannot continuously track distorted waveforms.

Features
True RMS reading is an essential feature for accurate measurement
Non contact voltage function indicates the presence of AC voltage by warning the user with an audible signal
Set the DC current range to zero in one touch with the zero adjust function
Auto power off
Designed to international safety standard IEC61010-1 CAT.3 300V

Kyoritsu 2300R AC/DC Fork Current Tester Specifications:

Range	Measuring Range	Accuracy
Current Measurement	AC A 0 to 100.0A DC A 0 to ±100.0A	\|±2.0%rdg±5dgt (50/60Hz) \|±2.0%rdg±5dgt
Conductor Size	Max Ø10mm
Non Contact Voltage	Detect AC voltage without contacting with socket wire	During voltage detection, “Hi” flashes and a buzzer sounds intermittently
Dimensions	161.3(L) × 40.2(W) × 30.3(D)mm
Crest Factor	2.5
Weight	110g (with batteries)
Maximum Digit	1,049
Safety Standard	IEC 61010-1 CAT III 300V Pollution Degree 2
Power Source	R03 (AAA) × 2
Accessories	Carrying Case R03 (AAA) × 2 Instruction Manual

The post Kyoritsu 2300R AC/DC Fork Current Tester appeared first on rapid-tech.

KYORITSU 2003A AC/DC Digital Clamp Meter 2000A

Mike — Thu, 17 Mar 2016 08:49:43 +0000

KYORITSU 2003A AC/DC Digital Clamp Meter 2000A Features:

Digital clamp-meter measures AC and DC to 2,000A, AC voltage to 750V, DC voltage to 1,000V, and resistance to 4,000 ohms
Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform
Clamp with 55mm (2.16 inches) jaw opening measures current without touching or interrupting the circuit
Maximum function displays the highest reading measured during a 400 millisecond sample
Meets IEC safety standards 61010-1, 61010-031, and 61010-2-032, and is rated for CAT IV installations to 600V and CAT III installations to 1,000V

AC A	400A/2000A (0~1000A)
	\|±1.5%rdg±2dgt [50/60Hz]
	\|±3%rdg±4dgt [40~500Hz]
	\|±5%rdg±4dgt [500Hz~1kHz]
	2000A (1001~2000A)
	\|±3%rdg±2dgt [50/60Hz]
AC V	400/750V
	\|±1.5%rdg±2dgt [50/60Hz]
	\|±1.5%rdg±4dgt [40Hz~1kHz]
DC A	400/2000A ±1.5%rdg±2dgt
DC V	400/1000V ±1%rdg±2dgt
Ω	400/4000Ω\|±1.5%rdg±2dgt
Continuity buzzer	buzzer sounds below 50±35Ω
Output	Recorder :	DC400mV against AC/DC400A
		DC200mV against AC/DC2000A
Conductor Size	Ø55mm max.
Safety Standard	IEC 61010-1 CAT.IV 600V CAT.III 1000V
	IEC 61010-031
	IEC 61010-2-032
Frequency Response	40Hz~1kHz
Withstand Voltage	6880V AC for 5 seconds
Power Source	R6P (AA) (1.5V) ×2
Dimensions	250(L) × 105(W) × 49(D)mm
Weight	530g approx.

Kyoritsu 2003A AC/DC 0 to 2000A has tear drop shaped jaws for use in tight spaces
Auto-Null function for one-touch zero adjustment
Maximum measurement function for ease of reading peak currents over a period of time

The post KYORITSU 2003A AC/DC Digital Clamp Meter 2000A appeared first on rapid-tech.