“Test Before Touch”

Fluke’s PRV240FS allows you to “Test Before Touch” (TBT), which involves testing your T6 against a known live source before, and after, the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement.

Voltage is sourced through a central hub designed to test the T6 FieldSense open fork, as well as through recessed contacts that are activated when test probes are inserted to avoid accidental contact.

Key benefits

• Using the PRV240FS reduces the risk of shock and arc flash by validating the functionality of test tools without placing yourself in a potentially hazardous electrical environment.
• Can prove functionality of the FieldSense measurement on the T6 electrical testers
• Sources both ac and dc steady-state voltage—supplies 240 V dc/ac.
• A single switch and a set of LEDs indicate functionality of both the FieldSense “no-test-lead” voltage measurement capability, plus standard ac and dc measurements with test leads. This unit is a simple-to-use solution for complying with TBT verification of your test tools.
• Compatible with high impedance multimeters or clamp meters.
• Voltage is sourced through a central hub designed to test the T6 FieldSense open fork, as well as through recessed contacts that are activated when test probes are inserted to avoid accidental contact
• Includes TPAK magnetic hanging strap
• Long battery life—2000 tests per set of four AA batteries (10 second test average)

The PRV240FS has been tested and includes a IEC61010-1, IEC61010-2-030 safety rating.

The Fluke 1000FLT takes the trial and error out of fluorescent light testing.

The Fluke 1000FLT performs all five essential tests with one compact tool. If your job requires keeping large numbers of fluorescent lights shining, the Fluke 1000FLT is an indispensable tool that saves time and money.

As one of the most complete lamp testers on the market, the 1000FLT enables you to perform the five essential lighting tests:

• Lamp test: Test bulb without removing from fixture
• Ballast test: Easily determine if ballast is working
• Non-contact voltage: Quickly check for voltage presence
• Pin continuity test: Tests if filaments have continuity
• Ballast-type test: Determine if ballast is electronic or magnetic without taking fixture apart–identify energy wasting ballasts

Other useful capabilities:

• Built to last, easy to maintain. Features a rugged, extendable all metal test rod that can be easily replaced should the need arise.

Be Ready for Anything

The Fluke iFlex flexible current probe expands the measurement range of the select Fluke meters to 2500 A AC while providing the ultimate measurement flexibility.

The i2500-10 iFlex probe connects directly to the meter, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the clamp meter making it easier to view the display.

The large loop size and thin cross section allow measurement of awkward sized conductors and improved access in crowded spaces.

The Fluke TLK281 SureGrip Automotive Test Lead Kit is a complete set of test and measurement accessories designed especially for automotive specialists.

You can use the sharp stainless steel probes to contact the wire conductor or pinpoint tests on a circuit or relay, and the large jaw alligator clips to get a good ground on the engine or to connect to the battery terminals.

With the extra long set of alligator clips you can easily grip to the alternator BAT terminal or the S terminals. The set comes with silicone test leads and a case to keep it organized.

Everything you can find in the TLK281 Automotive Test Lead Kit, plus a few extras.

Use the back probe pins to slide into weather pack connectors on fuel injectors, TPS and MAP sensors. A hook probe with plunger actuation allows quick connection to pins or exposed conductors.

TLK281 Kit contains:

• TP81 Insulation Piercing Clip Set
• TP40 Automotive Back Probe Pins (five)
• TL224 Suregrip™ Silicone Test Lead Set
• TP220 Suregrip™ Test Probe Set
• AC220 Suregrip™ Alligator Clip Set
• AC285 Suregrip™ Large Jaw Alligator Clip Set
• AC280 Suregrip™ Hook Clip Set
• Soft Case

Fluke TLK287 Electronics Master Test Lead Set is ideal for electronic test and design.

The TLK287 includes precision electronic probes with multiple spring-loaded sharp tips to maximize contact with SMD test points. Micro-grabbers and leads enable fine SMD testing. Mini-alligator clips, grabbers and probes for virtually every electronics need.

Also included with the TLK287 are modular test leads and lead-probe combinations for versatility and couplers for long lead applications.

The Fluke TLK289 Industrial Master Test Lead Set is designed for electrical and electronics testing in today’s industrial environment.

Fluke test leads, alligator clips and test probes broaden the ability to take meter measurements, extending the capabilities of your meter. They are an integral part of the complete measurement system, helping to get accurate readings while remaining safe.

Includes 8 items.

• • TL224 test lead set, AC285 SureGrip™ alligator clips, AC220 SureGrip™ alligator clips, AC280 SureGrip™ hook clips and TP220 SureGrip™ industrial test probes for dependable contact with a variety of test points
  • TPAK ToolPak™ Magnetic hanger for convenient suspension of your DMM from a metal surface
  • 80BK-AK Type thermocouple temperature probe for direct temperature measurement with your DMM’s temperature measurement functions
  • C116 protective soft case for your DMM and all its accessories