Tenmars TM-186 CO2 Meter and Temperature



  • Large LED display.
  • Measurement CO2 and Temperature.
  • Temperature °C or °F.
  • Real time data.
  • Data Hold function.
  • Alarm function.


  • The TM-186/TM-186D can be wall mounted or desk. It is ideal for CO2 and Temperature monitoring and control.

Authorised Australian Distributor


If you would like more information regarding this product, simply email us here.
  • This field is for validation purposes and should be left unchanged.
SKU: TENMARS TM-186 Categories: , Tags: ,
Display Large LED dual display
CO2 Maximum Reading 9999
Temperature Maximum Reading 999
CO2 Sensor Infrared
Temperature Sensor Diode
Sampling Rate 1 reading per second
Resolution 1ppm, 0.1°C, 0.1°F
General Specifications
Power Supply 9 Volt battery and or AC to DC adapter
Backup Power 9 Volt battery, NEDA 1604, IEC 6F22 or JIS 006P (for Datalogger use)
Operating Temperature -20°C to 70°C
Storage Temperature -10°C to 60°C
Dimensions 260mm (L) x 178mm (W) x 47mm (D)
Weight 1000g
Ordering Information
Model Name Description
Tenmars TM-186 CO2, and Temperature Monitor
Included accessories: User’s manual, 9V battery, AC adapter, Carrying case and LCD Wall Mounting Kit.


Tenmars TM-186 Maintenance

a Do not use the meter in an environment with severe change; do not store the unit in an environment with high temperature, high humidity, and high vibration. Take the battery off if the meter has not been used for a long period of time. The Diode temperature probe is used to measure temperature and the capacitive humidity sensor is used to measure take humidity. The thermocouple and humidity sensor will start aging under the influence of oxidation, reduction, corrosion, pollution, vaporization, diffusion or other metallurgy. The aging process will affect its precision seriously. Cleaning and inspection of temperature probe: The smoke, coal, dust, grease attached on the protective tube oftemperature probe will slow down the heat conduction of the thermocouple and cause measuring error. Therefore, it should be cleaned periodically. The metal coating of thin thermocouple should be replaced properly upon the occurrence of corrosion. o Cleaning and inspection of humidity sensor: The smoke and dust attached on the humidity sensor will slow down the function of humidity sensor and cause measuring error. Therefore, it should be cleaned periodically. Blow off the dust with mild compressed air instead of water or alcohol. The aluminum plate inside the humidity sensor should be replaced upon the occurrence of corrosion

Weight 1 kg


There are no reviews yet.

Be the first to review “Tenmars TM-186 CO2 Meter and Temperature”